About This Documentation (PDF and HTML)
Server Module and Components Overview
About the Sun Blade 6000 Modular System Chassis
Powering On and Off the Server Module
Preparation Procedures for Service and Operation
Preparing the Server for Service
Preparing the Server for Operation
Component Removal and Installation Procedures
Removing and Installing Flash Modules
Removing and Installing the Energy Storage Modules
Removing and Installing the Service Processor Board
Removing and Installing USB Flash Drives
Removing and Installing a CPU and Heatsink Assembly
How to Replace the Motherboard Assembly
Diagnostic and Maintenance Information and Procedures
Diagnosing Server Module Hardware Faults
BIOS Power-On Self-Test (POST) Codes
Server Module Maintenance Procedures and Information
BIOS Setup Utility Screens Overview
How to Display FRUID Information
How to Back Up FRU Information
Removing and Installing a Server Module Filler Panel
How to Remove a Server Module Filler Panel
How to Install the Server Module Filler Panel
The BIOS Setup Utility contains both read-only information and settings that can be customized. Use this procedure to access the BIOS Setup Utility and customize settings.
Before You Begin
See About the BIOS Setup Utility.
Tip - Watch the screen for the prompt to press F2.
The main BIOS Setup menu screen appears.
Use the left and right arrow keys to select the main menu screens.
Use the up and down arrows, on the keyboard, to select an item within a screen.
Fields that can be configured or that provide access to a sublevel appear highlighted. All other fields are read only.
A sublevel or a dialog box with the available option fields appears.
For example, to save the changes that you made, highlight the Save Changes and Exit option and press Enter.
When you exit the BIOS Setup Utility, the server boots. If you've made changes to BIOS settings, those changes are valid with the system boot.
See Also