Supported Hardware

The Sun Blade X6275 M2 server module is currently supported for use in the following chassis hardware environment.

Note - The Sun Blade X6275 M2 server module can use either a 1GbE or 10GbE interface through the NEM (depending on your server model), you cannot use both. On 1GbE models, there is no MellanoxCX-2 chip, and therefor no 10GbE interface. On the 10GbE model, it is only supported to work with Sun Blade 6000 Ethernet Switched NEM 24p 10GbE which does not provide a 1GbE interface and therefore the 1GbE interface on each server node is disabled by firmware.

Server Module	Supported Chassis	Supported NEMs
Sun Blade X6275 M2 GbE Server Module (p/n X6275M2–BB)	Sun Blade 6000 Modular System chassis (A90–B) with PCIe 2.0 midplane (minimum supported chassis software release 3.2)	Note - For NEMs with multiple interfaces, only the 1GbE interface will be used by the server nodes. Sun Blade 6000 10 1GbE Pass-Thru NEM (X4250A-N) (Recommended) Sun Blade 6000 Virtualized Multi-Fabric 10GbE M2 NEM (X4338A) Sun Blade 6000 Virtualized Multi-Fabric 10GbE NEM (X4238–N) Sun Blade 6000 10GbE Multi-Fabric NEM (X4236A-N) Sun Blade 6000 GbE Multi–Fabric NEM (X4212A-N)
Sun Blade X6275 M2 10GbE Server Module (p/n X6275M2–CB)	Sun Blade 6000 Modular System chassis (A90–B) with PCIe 2.0 midplane (minimum supported chassis software release 3.2)	Sun Blade 6000 Ethernet Switched NEM 24p 10GbE (X2073A-N) Note - Since this NEM only supports a 10GbE interface, the server node 1GbE ports will be disabled by firmware.

Note - The X6275 M2 server module only leverages the GbE Pass-Thru support provided in the NEMs listed above.

Skip Navigation Links
Exit Print View
	Sun Blade X6275 M2 Server Module Product Notes