About This Documentation (PDF and HTML)
Hardware Installation and Product Notes
Overview of the Sun Blade X6275 M2 Server Module
Installing and Powering On the Server Module
Overview of the Sun Blade X6275 M2 Server Module Product Notes
System Software Release Features
Hardware, Firmware, and BIOS Issues
Installing the Oracle Solaris Operating System
Installing Red Hat Enterprise Linux
Installing the SLES Operating System
Introduction to Oracle VM Installation
How to Obtain Oracle VM Software
How to Install Oracle VM Server
Creating and Managing VM Resources
Creating a PXE Installation Image for Oracle VM
How to Create a PXE Installation Image for Oracle VM
Introduction to Windows Installation
Getting Started With Windows Server 2008 Installation
Installing the Windows Server 2008 R2 Operating System
Updating Critical Drivers and Installing Supplemental Software
Incorporating Device Drivers into a WIM Image for WDS
Administration, Diagnostics, and Service
Overview of the ILOM Supplement
Managing Power Usage and Monitoring Power Consumption
Configuring the Server Power Restore Policy
Switching the Default Serial Port Output Between SP and Host Console
Indicators, Sensors, and Traps
Introduction to Diagnostic Tools
U-Boot Diagnostic Startup Tests
Accessing the Pc-Check Diagnostics Utility on the Tools and Drivers CD/DVD
Server Module and Components Overview
Preparation Procedures for Service and Operation
Component Removal and Installation Procedures
Before You Begin
If you are installing Oracle VM Server on a Sun server, you can use the Integrated Lights Out Manager (ILOM) to install software using either a CD/ DVD or an ISO image mounted on a remote system. The remote console feature allows you to use the keyboard, mouse, video, and storage of the remote system as if it were connected to the server where you are installing the operating system. Once the remote console session is configured, the server can boot from the remotely mounted distribution media (either a CD/DVD or equivalent ISO file).
# sh runInstaller.sh
Note - If you are not already the root user, use the su command and enter the root password to give yourself the necessary privileges to launch the install script.
For additional information refer to the Oracle VM Manager installation documentation at:
Next Steps