UUCP /etc/uucp/Dialers File

The /etc/uucp/Dialers file contains dialing instructions for commonly used modems. You probably do not need to change or add entries to this file unless you plan to use a nonstandard modem or plan to customize your UUCP environment. Nevertheless, you should understand what is in the file and how it relates to the Systems and Devices file.

The text specifies the initial conversation that must occur on a line before the line can be made available for transferring data. This conversation, known as a chat script, is usually a sequence of ASCII strings that is transmitted and is expected. A chat script is often used to dial a phone number.

As shown in the examples in UUCP /etc/uucp/Devices File, the fifth field in a Devices file entry is an index into the Dialers file or a special dialer type, such as TCP, TLI, or TLIS. The uucico daemon attempts to match the fifth field in the Devices file with the first field of each Dialers file entry. In addition, each odd-numbered Devices field, starting with the seventh position, is used as an index into the Dialers file. If the match succeeds, the Dialers entry is interpreted to perform the dialer conversation.

Each entry in the Dialers file has the following syntax:

dialer   substitutions   expect-send

The following example shows the entry for a U.S. Robotics V.32bis modem.

Example 26-10 Entry in /etc/uucp/Dialers File

usrv32bis-e    =,-,  ""    dA\pT&FE1V1X1Q0S2=255S12=255&A1&H1&M5&B2&W\r\c OK\r 
                           \EATDT\T\r\c CONNECT\s14400/ARQ STTY=crtscts

usrv32bis-e

Entry in the Dialer field. The Dialer field matches the fifth and additional odd-numbered fields in the Devices file.

=,-, ""

Entry in the Substitutions field. The Substitutions field is a translation string. The first of each pair of characters is mapped to the second character in the pair. This mapping is usually used to translate = and - into whatever the dialer requires for “wait for dial tone” and “pause.”

dA\pT&FE1V1X1Q0S2=255S12=255&A1&H1&M5&B2&W\r\c OK\r

Entry in Expect-Send field. The Expect-Send fields are character strings.

\EATDT\T\r\c CONNECT\s14400/ARQ STTY=crtscts

More of the Expect-Send field.

The following example shows sample entries in the Dialers file, as distributed when you install UUCP as part of the Oracle Solaris installation program.

Example 26-11 Excerpts From /etc/uucp/Dialers

penril    =W-P "" \d > Q\c : \d- > s\p9\c )-W\p\r\ds\p9\c-) y\c : \E\TP > 9\c OK 
 
ventel    =&-%    "" \r\p\r\c $ <K\T%%\r>\c ONLINE! 
 
vadic    =K-K    "" \005\p *-\005\p-*\005\p-* D\p BER? \E\T\e \r\c LINE 
 
develcon    ""    "" \pr\ps\c est:\007 
 
\E\D\e \n\007 micom    ""    "" \s\c NAME? \D\r\c GO 
 
hayes    =,-,    "" \dA\pTE1V1X1Q0S2=255S12=255\r\c OK\r \EATDT\T\r\c CONNECT 
 
#   Telebit TrailBlazer 
tb1200    =W-,    "" \dA\pA\pA\pTE1V1X1Q0S2=255S12=255S50=2\r\c OK\r 
\EATDT\T\r\c CONNECT\s1200   
tb2400    =W-,    "" \dA\pA\pA\pTE1V1X1Q0S2=255S12=255S50=3\r\c OK\r 
\EATDT\T\r\c CONNECT\s2400   
tbfast    =W-,    "" \dA\pA\pA\pTE1V1X1Q0S2=255S12=255S50=255\r\c OK\r 
\EATDT\T\r\c CONNECT\sFAST 
 
# USrobotics, Codes, and DSI modems 
 
dsi-ec  =,-,    "" \dA\pTE1V1X5Q0S2=255S12=255*E1*F3*M1*S1\r\c OK\r \EATDT\T\r\c 
CONNECT\sEC STTY=crtscts,crtsxoff 
 
dsi-nec =,-,    "" \dA\pTE1V1X5Q0S2=255S12=255*E0*F3*M1*S1\r\c OK\r \EATDT\T\r\c CONNECT 
STTY=crtscts,crtsxoff 
 
usrv32bis-ec =,-,  "" \dA\pT&FE1V1X1Q0S2=255S12=255&A1&H1&M5&B2&W\r\c OK\r \EATDT\T\r\c 
CONNECT\s14400/ARQ STTY=crtscts,crtsxoff 
 
usrv32-nec =,-, "" \dA\pT&FE1V1X1Q0S2=255S12=255&A0&H1&M0&B0&W\r\c OK\r \EATDT\T\r\c 
CONNECT STTY=crtscts,crtsxoff 
 
codex-fast =,-, "" \dA\pT&C1&D2*MF0*AA1&R1&S1*DE15*FL3S2=255S7=40S10=40*TT5&W\r\c OK\r 
\EATDT\T\r\c CONNECT\s38400 STTY=crtscts,crtsxoff 
 
tb9600-ec =W-,  "" \dA\pA\pA\pTE1V1X1Q0S2=255S12=255S50=6\r\c OK\r 
\EATDT\T\r\cCONNECT\s9600 STTY=crtscts,crtsxoff 
 
tb9600-nec =W-, "" \dA\pA\pA\pTE1V1X1Q0S2=255S12=255S50=6S180=0\r\c OK\r \EATDT\T\r\c 
CONNECT\s9600 STTY=crtscts,crtsxoff

The following table lists escape characters that are commonly used in the send strings in the Dialers file.

Table 26-3 Backslash Characters for /etc/uucp/Dialers

Here is a penril entry in the Dialers file:

penril =W-P "" \d > Q\c : \d- > s\p9\c )-W\p\r\ds\p9\c-) y\c : \E\TP > 9\c OK 

First, the substitution mechanism for the phone number argument is established so that any = is replaced with a W (wait for dial tone) and any - with a P (pause).

The handshake that is given by the remainder of the line works as listed:

• "" – Waits for nothing, which means proceed to the next step.

• \d – Delays 2 seconds, then sends a carriage return.

• > – Waits for a >.

• Q\c – Sends a Q without a carriage return.

• : – Expects a :.

• \d- – Delays 2 seconds, sends a - and a carriage return.

• > – Waits for a >.

• s\p9\c – Sends an s, pauses, sends a 9 with no carriage return.

• )-W\p\r\ds\p9\c-) – Waits for a ). If ) is not received, processes the string between the - characters as follows. Sends a W, pauses, sends a carriage return, delays, sends an s, pauses, sends a 9 without a carriage return, then waits for the ).

• y\c – Sends a y with no carriage return.

• : – Waits for a :.

• \E\TP – \E enables echo checking. From this point forward, whenever a character is transmitted, UUCP waits for the character to be received before proceeding. Then, UUCP sends the phone number. The \T means to take the phone number that is passed as an argument. The \T applies the Dialcodes translation and the modem function translation that is specified by field 2 of this entry. Then \T sends a P and a carriage return.

• > – Waits for a >.

• 9\c – Sends a 9 without a newline.

• OK – Waits for the string OK.

Enabling Hardware Flow Control in the /etc/uucp/Dialers File

You can also use the pseudo-send STTY=value string to set modem characteristics. For instance, STTY=crtscts enables outbound hardware flow control. STTY=crtsxoff enables inbound hardware flow control. STTY=crtscts,crtsxoff enables both outbound and inbound hardware flow control.

STTY accepts all the stty modes. See the stty(1) and termio(7I) man pages.

The following example would enable hardware flow control in a Dialers entry:

dsi =,–, "" \dA\pTE1V1X5Q0S2=255S12=255*E1*F3*M1*S1\r\c OK\r \EATDT\T\r\c 
CONNECT\sEC STTY=crtscts 

This pseudo-send string can also be used in entries in the Systems file.

Setting Parity in the /etc/uucp/Dialers File

In some situations, you have to reset the parity because the system that you are calling checks port parity and drops the line if it is wrong. The expect-send couplet P_ZERO sets parity to zero:

foo =,-, "" P_ZERO "" \dA\pTE1V1X1Q0S2=255S12=255\r\c OK\r\EATDT\T\r\c CONNECT 

The following are parity couplets that can follow the expect-send couplet:

"" P_EVEN

Sets the parity to even, which is the default

"" P_ODD

Sets the parity to odd

"" P_ONE

Sets the parity to one

This pseudo-send string can also be used in entries in the Systems file.