Skip Navigation Links | |
Exit Print View | |
Sun Storage 6 Gb SAS PCIe HBA, External Installation Guide For HBA Models SGX-SAS6-EXT-Z and SG-SAS6-EXT-Z |
Valid Drive Mix Configurations With HDDs and SSDs
Operating System and Technology Requirements
Chapter 2 Hardware Installation and Removal
Chapter 3 Creating a Bootable Drive in a Preboot Environment
The following are the SAS/SATA features supported by the HBA:
Serial SCSI protocol (SSP), serial ATA tunneling protocol (STP), and serial management protocol (SMP), as defined in the Serial Attached SCSI (SAS) Specification, version 2.0
SAS interface that is compatible with the ANSI Serial Attached SCSI Specification, revision 2.0 and the Serial ATA Specification, revision 2.6
Capability of running with either 4 or 8 serial ports for connection to SAS/SATA (Serial ATA) devices
Each serial port is capable of 6.0 Gb/s SAS link rates and 1.5 Gb/s or 3.0 Gb/s SATA link rates
Support for the easy addition of SAS interfaces to any computer, workstation, or server with a PCI Express bus
4 or 8 PCIe PHYs, which provide possible host-side maximum transmission and reception rates of up to 4 Gb/s
Narrow and wide ports
SATA target devices, as defined in the Serial ATA Specification, version 2.6
Transfer of data using SCSI information units
Oracle's Sun Storage 6 Gb SAS PCIe HBA, External shows the physical layout of the HBA.
Figure 1-1 Oracle's Sun Storage 6 Gb SAS PCIe HBA, External