How to Connect to the Server Locally (Physical Console)

Document Information

Using This Documentation

Hardware Installation

Communicating With Oracle ILOM and the System Console

Server Connections

About Oracle ILOM SP IP Addresses and the Oracle ILOM Interfaces

Determining the SP IP Address

How to Get the SP IP Address by Using the BIOS Setup Utility

How to Get the SP IP Address by Using a Serial Connection and the CLI

Connecting to Oracle ILOM

How to Connect to Oracle ILOM CLI Using the Serial Management Port

How to Connect to the Oracle ILOM CLI Using SSH

How to Connect to the Oracle ILOM Web Interface

Connecting to the System Console

How to Connect to the Server Locally (Physical Console)

How to Connect to the Host's Serial Console Using the Oracle ILOM Command-Line Interface

How to Connect Remotely Using the Oracle ILOM Web Interface

Operating System Installation

Administration, Diagnostics, and Service

Index

If you plan to interact with the system console directly, make the connections described in this procedure. See Attaching Administration (SP) Cables for the locations of the system connectors.

Before You Begin

Perform the hardware setup as described in the hardware setup documentation.

Connect a multiport cable to the SP, as shown in Attaching Administration (SP) Cables.
Connect a mouse and a keyboard to the USB connectors on the multiport cable.
Connect a VGA monitor to the video connector on the multiport cable.

Skip Navigation Links
Exit Print View
	Sun Server X2-8 Product Documentation Sun Server X2-8 (formerly Sun Fire X4800 M2) Documentation Library