Oracle® Fusion Middleware Developer's Guide for Content Server 11g Release 1 (11.1.1) E10807-01 |
|
![]() Previous |
![]() Next |
Home > Developer's Guide fo... > Integration Methods > IdcCommand Utility
This section provides information on using the IdcCommand utility to access content server services from other applications. It covers these topics:
The IdcCommand utility is a standalone Java application that executes Content Server services. Almost any action you can perform from the content server browser interface or administration applets can be executed from IdcCommand.
The program reads a Command File, which contains service commands and parameters, and then calls the specified services. A log file can record the time that the call was executed, whether the service was successfully executed, and if there were execution errors.
Note: The IdcCommand utility returns only information about the success or failure of the command. To retrieve information from the Content Server in an interactive session, use the Java COM wrapper IdcCommandX, available on Microsoft Windows platforms. See "IdcCommand Utility" for additional information. |
To run the IdcCommand utility, the following parameters must be specified on the command line or in the intradoc.cfg configuration file:
A command file containing the service commands and parameters.
A content server user name. This user must have permission to execute the services being called.
A path and file name for a log file.
The connection mode (auto, server, or standalone).
There are certain commands that cannot be executed in standalone mode. In general, these commands are performed asynchronously by the server in a background thread. This happens in the update or rebuild of the search index.
For information on using services in custom components, see the Oracle Fusion Middleware Services Reference Guide for Universal Content Management and Chapter 3, "Working with Components".
To set up IdcCommand, you must specify the following two things:
A Command File, which specifies the services to be executed and any service parameters.
Configuration Options, which specify the command file and other IdcCommand information. You can set IdcCommand configuration options in two places:
In a configuration file, using name/value pairs such as:
IdcCommandFile=newfile.hda
IdcCommandUserName=sysadmin
IdcCommandLog=C:/domain/newlog.txt
ConnectionMode=server
On the command line when running IdcCommand, specifying option flags such as:
-f newfile.hda -u admin -l C:/domain/newlog.txt -c server
Note: Command-line configuration options override the settings in the configuration file. |
IdcCommand is run from a command line. You can specify the Configuration Options either from the command line or in a configuration file. See "Running IdcCommand" for more information.
The command file defines the service commands and parameters that are executed by the IdcCommand utility. The command file follows these rules:
The command file uses the HDA (hyperdata file) syntax to define service commands.
Each service to be executed, along with its parameters, is specified in a @Properties LocalData
section.
For some services, a @ResultSet
section is used to specify additional information.
Data from one section of the command file is not carried over to the next section. Each section must contain a complete set of data for the command.
Service names and parameters are case sensitive.
For example, the following command file executes the ADD_USER service and defines attributes for two new users:
<?hda version="5.1.1 (build011203)" jcharset=Cp1252 encoding=iso-8859-1?> # Add users @Properties LocalData IdcService=ADD_USER dName=jsmith dUserAuthType=Local dFullName=Jennifer Smith dPassword=password dEmail=email@email.com @end @ResultSet UserAttribInfo 2 dUserName AttributeInfo jsmith role,contributor,15 @end <<EOD>> @Properties LocalData IdcService=ADD_USER dName=pwallek dUserAuthType=Local dFullName=Peter Wallek dPassword=password dEmail=email@email.com @end @ResultSet UserAttribInfo 2 dUserName AttributeInfo pwallek role,contributor,15,account,marketing,7 @end <<EOD>>
IdcCommand uses precedence to resolve conflicts among the name/value pairs within the LocalData
section of the command file. When normal name/value pairs are parsed, they are assumed to be within the @Properties LocalData
tag. If the section contains HDA tags, the normal name/value pairs take precedence over name/value pairs within the @Properties LocalData
tag.
For example, if foo=x
is in a normal name/value pair and foo=y
is within the @Properties LocalData
tag, the name/value pair foo=x
takes precedence because it is outside the tag.
These special tags and characters can be used in a command file:
Special Character | Description |
---|---|
IdcService=service_name | Each section of the command file must specify the name of the service it is calling. |
<<EOD>> | The end of data marker. The command file can include one or more sections separated with an end of data marker. See "Command File Syntax" for an example. |
# | The pound character placed at the beginning of a line indicates that the line is a comment. |
\ | The backslash is an escape character. |
@Include filename | This tag enables you to include content from another file at the spot where the @Include tag is placed. This tag can be used to include a complete HDA file or to include shared name/value pairs. This inclusion takes the exact content of the specified file and places it in the location of the @Include tag. A file can be included as many times as desired and an included file may include other files. However, circular inclusions are not allowed. |
To run the IdcCommand utility, specify the following on the command line or in the DomainHome/ucm/cs/bin/intradoc.cfg configuration file:
Parameter | Required? | Command Line Syntax | Configuration File Syntax |
---|---|---|---|
Command File |
Yes |
|
|
User |
Yes |
|
|
Log File |
No |
|
|
Connection Mode |
No |
|
|
Note: Command-line configuration options override the settings in the configuration file. |
You must specify the name of the command file that contains the service commands and parameters. The command file parameter can specify a full path (such as C:/command_files/command.txt), or it can specify a relative path. See "Command File" for more information.
You must specify a Content Server user name. This user must have permission to execute the services being called.
You can specify a path and file name for an IdcCommand log file. As each command is executed, a message is sent to the log file, which records the time the command was executed and its success or failure status. If the log file already exists, it is overwritten with the new message. The log file can be used to display processing information to the user.
If the action performed is successful, a "success" message is written to the log file.
If the action performed is not successful, an error message is written to the log file.
If no log file is specified, information is logged only to the screen.
You can specify the connection mode for executing the IdcCommand services.
To run IdcCommand:
Create a new IdcCommand working directory.
Use this directory for your command file and configuration file.
Create a Command File in the working directory to specify the desired service commands.
Copy the intradoc.cfg configuration file from the DomainHome/ucm/cs/bin directory into the working directory.
Important: Do not delete the IntradocDir or WebBrowserPath information. |
Add IdcCommand options to the intradoc.cfg file in the working directory. See Configuration Options for more information.
IdcCommandFile=newfile.hda
IdcCommandUserName=sysadmin
IdcCommandLog=C:/domain/newlog.txt
Run the IdcCommand stored in the DomainHome/ucm/cs/bin directory:
IdcCommand.exe
The Launcher is a native C++ application used to manage services in Windows environments and to construct command line arguments and environment settings for the Java VM.
The main operation of the Launcher is to find and read its configuration files, compute any special values, then launch an executable with a command line that it constructs. Configuration files support Bourne Shell-like substitutions, all of which start with the dollar sign ($) followed by an alphanumeric identifier or expression inside braces ( { } ).
The Launcher executable is installed in DomainHome/ucm/native/platform/bin/Launcher. On UNIX systems, symlinks are created in the bin/ directory to Launcher.sh, a Bourne Shell wrapper which executes the Launcher executable. The purpose of this wrapper is to locate the correct binary Launcher executable for the platform. The term Launcher is used here to refer to the native Launcher executable or to the Launcher.sh Bourne Shell script.
The Launcher or the symlink to the Launcher.sh must reside in a directory with a valid intradoc.cfg configuration file and must have the same name as the Java class file to be launched (case sensitive). The Launcher uses this name to set the environment variable STARTUP_CLASS
.
On Windows this name is computed by calling GetModuleFileName()
. On UNIX systems, it is computed by inspecting argv[0]
. The PLATFORM
variable is set to the Content Server identifier for the platform. The variable BIN_DIR
is set to the directory where the Launcher is located.
The Launcher reads a file named intradoc.cfg from BIN_DIR
. This file should contain a value for IntradocDir
. The IntradocDir
is used as the base directory for resolving relative paths. Any unqualified path in this document should be taken as relative to the IntradocDir
. Future releases of Content Server may change or remove these variable names.
If the intradoc.cfg file does not contain a value for IdcHomeDir
, the Launcher sets IdcHomeDir
to be $IntradocDir/resources
. If the Launcher is starting a Windows service, it sets IS_SERVICE
to 1. If it is unset, the Launcher also sets PATH_SEPARATOR
to the correct character for the platform.
The Launcher reads the intradoc.cfg file first to find the locations of configuration files, then reads all available configuration files in this order:
$IdcResourcesDir/core/config/launcher.cfg
$BIN_DIR/../config/config.cfg
$IntradocDir/config/config.cfg
$IntradocDir/config/config-$PLATFORM.cfg
$IntradocDir/config/state.cfg
$IdcResourcesDir/core/config/launcher-$PLATFORM.cfg
$IdcResourcesDir/core/config/launcher-local.cfg
$BIN_DIR/intradoc.cfg
$BIN_DIR/intradoc-$PLATFORM.cfg
All files specified on the command line, using the -cfg
option.
Note: You can assign variable values directly on the command line by using the-cfg option NAME=VALUE. |
The Launcher uses Bourne Shell-like quoting rules. A string can be quoted inside double quotes (") to escape spaces. A backslash (\) can precede any character to provide that character. After a final command line is computed, the Launcher separates it into non-quoted spaces. Each string is then unquoted and used as an entry in the argv
array for the command.
After reading the configuration files, the Launcher processes variable substitutions. Some variables can have extra computations to validate directories or files, build command-line argument lists, or construct PATH
-like variables.
These special computations are performed for variables based on their type. To set a type for a variable, set TYPE_
variable
_
name
=
typename
in any of the configuration files listed previously.
The following list describes Launcher variable types:
file
Examples:
TYPE_PASSWD_FILE=file PASSWD_FILE_sys5=/etc/passwd PASSWD_FILE_bsd=/etc/master.passwd
The type looks for a file. If the value of variable_name
is a path to an existing file, it is kept. If not, every variable beginning with variable_name_
is checked. The last value, which is a path to an existing file, is used for the new value of variable_name
.
In this example PASSWD_FILE
is set to /etc/master
if /etc/master.passwd
exists, or it is set to /etc/passwd</span>
if /etc/passwd
exists. Otherwise, PASSWD_FILE
is undefined.
directory
Examples:
TYPE_JDK=directory JDK_java_home=$JAVA_HOME OS_DIR=$IdcHomeDir/native DEFAULT_JDK_DIR=$OS_DIR/$PLATFORM JDK_legacy142=$DEFAULT_JDK_DIR/j2sdk1.4.2_04 JDK_default=$DEFAULT_JDK_DIR/jdk1.5.0_07
In this example JDK
id set to the same value as the last of the JDK_
variables that is a directory. Typically this would point at the JDK installed with Content Server. Note that JDK_java_home
references $JAVA_HOME
; if a variable is not defined in any configuration file but is in the environment, the environment value is used.
executable
Examples:
TYPE_JAVA_EXE=executable JAVA_EXE_default=java$EXE_SUFFIX JAVA_EXE_jdk_default=$JDK/bin/java$EXE_SUFFIX
The executable type looks for an executable. It works very much like the file type, but looks through every directory in $PATH
for each candidate value. In this example JAVA_EXE
is set to the java executable in the JDK
if it exists. Otherwise it is set to the first java executable in the PATH
.
list
Examples:
TYPE_JAVA_OPTIONS=list JAVA_MAX_HEAP_SIZE=384 DEFINE_PREFIX=-D JAVA_OPTIONS_BIN_DIR=${DEFINE_PREFIX}idc.bin.dir=$BIN_DIR JAVA_OPTIONS_maxheap=${JAVA_MAX_HEAP_SIZE+-Xmx${JAVA_MAX_HEAP_SIZE\}m} JAVA_OPTIONS_service=${IS_SERVICE+$JAVA_SERVICE_EXTRA_OPTIONS}
The list type computes a list of options for an executable. Each value that begins with variable_name_
becomes a quoted option, and variable_name
is set to the entire list. In this example, JAVA_OPTIONS
is set to the string:
"-Didc.bin.dir=/intradocdir/bin/" "-Xmx384m"
path
Examples:
IdcResourcesDir=$(IdcResourcesDir-$IdcHomeDir/resources) BASE_JAVA_CLASSPATH_source=$IdcResourcesDir/classes BASE_JAVA_CLASSPATH_serverlegacy=$SharedDir/classes/server.zip BASE_JAVA_CLASSPATH_server=$JLIB_DIR/idcserver.jar
The classpath type computes a path-like value.The value of each variable starting with variable_name_
is appended to the value of variable_name
separated by the value of PATH_SEPARATOR
. In this example JAVA_CLASSPATH
is set to a very long classpath.
lookupstring
Examples:
TYPE_VDK_PLATFORM=lookupstring PARAMETER_VDK_PLATFORM=${PLATFORM}_${UseVdkLegacySearch+vdk27} VDK_PLATFORM_aix_vdk27=_rs6k41 VDK_PLATFORM_aix_=_rs6k43 VDK_PLATFORM_hpux_vdk27=_hpux11 VDK_PLATFORM_hpux_=_hpux11 VDK_PLATFORM_freebsd_vdk27=_ilnx21 VDK_PLATFORM_freebsd_=_ilnx21 VDK_PLATFORM_linux_vdk27=_ilnx21 VDK_PLATFORM_linux_=_ilnx21 VDK_PLATFORM_solaris_vdk27=_ssol26 VDK_PLATFORM_solaris_=_ssol26 VDK_PLATFORM_win32_vdk27=_nti40 VDK_PLATFORM_win32_=_nti40
The lookupstring
uses a second parameter to construct a lookup key for the final value. The second parameter is the value of $PARAMETER_
variable_name
. If this value is undefined, the current value of variable_name
is used as the lookup key. In this example, PARAMETER_VDK_PLATFORM
has the value of ${PLATFORM}_
or ${PLATFORM}_vdk27
depending on the value of UseVdkLegacySearch
.
This value is then used to look up the value of the variable VDK_PLATFORM_${PARAMETER_VDK_PLATFORM}
which is then quoted and assigned to VDK_PLATFORM
.
lookuplist
Examples:
TYPE_STARTUP_CLASS=lookuplist STARTUP_CLASS_version=Installer --version STARTUP_CLASS_installer=Installer STARTUP_CLASS_WebLayoutEditor=IntradocApp WebLayout STARTUP_CLASS_UserAdmin=IntradocApp UserAdmin STARTUP_CLASS_RepositoryManager=IntradocApp RepositoryManager STARTUP_CLASS_Archiver=IntradocApp Archiver STARTUP_CLASS_WorkflowAdmin=IntradocApp Workflow STARTUP_CLASS_ConfigurationManager=IntradocApp ConfigMan
The lookuplist
uses a second parameter to construct a lookup key for the final value. The second parameter is the value of $PARAMETER_
variable_name
. If this value is undefined, the current value of variable_name
is used as the lookup key.
Unlike lookupstring
, lookuplist
does not quote the final value. In this example, assume the current value of STARTUP_CLASS
is version. STARTUP_CLASS
is replaced with the value Installer --version
.
After processing the computed settings, the Launcher iterates over all variables that begin with the string EXPORT_
. The value of each variable is used as an environment variable name, which has the value of the second half of the EXPORT_
variable assigned. For example, EXPORT_IDC_LIBRARY_PATH=LD_LIBRARY_PATH
exports the value of the IDC_LIBRARY_PATH
variable with the name LD_LIBRARY_PATH
.
The variable JAVA_COMMAND_LINE
is used to get the command line. Any command line arguments to the Launcher that have not been consumed are appended to the command line. On UNIX systems, the command line is parsed and quoting is undone and then execv
is called. On Windows, a shutdown mutex is created and CreateProcess
is called with the command line. Care should be taken because CreateProcess
does not undo backslash-quoting.
The principal mechanism for debugging the Launcher is to add the flag -debug
before any arguments for the final command. You can also create a file named $BIN_DIR/debug.log which triggers debug mode and contain the debug output.
The Launcher has knowledge of the following configuration entries, which it either sets or uses to control its behavior. Note that these configuration variables may change or be removed in future releases of Content Server:
IDC_SERVICE_NAME
: the name of the win32 service used for service registration, unregistration, startup, and shutdown.
IDC_SERVICE_DISPLAY_NAME
: the display name of the win32 used for service registration.
IntradocDir
: the base directory for relative path names.
IdcBaseDir
: an alternate name for IntradocDir
.
IdcResourcesDir
: set to $IdcHomeDir/resources
if otherwise undefined.
IdcNativeDir
: defaults to $IdcHomeDir/native
if otherwise unset.
PATH_SEPARATOR
: set to either colon (:) or semi-colon (;) if otherwise unset.
STARTUP_CLASS
: set to the name of the Launcher executable.
MUTEX_NAME
: the name used to create a shutdown mutex on win32.
BEFORE_WIN_SERVICE_START_CMD
: if set, is a command line that is executed before a win32 service starts.
UseRedirectedOutput
: if set tells the Launcher on win32 to redirect the output from the Java VM to a file.
ServiceStartupTimeout
: the timeout used for waiting for a Java process to successfully start on win32.
Tip: By using theLauncher.exe , changing the status.dat file, and altering the value of the JVM command line, you could theoretically run any Java program as a Windows service. This is not recommended for normal use, but it does explain the many ways you could configure the Launcher. |
The UI for the Launcher is the same as the application it launches. For example, if the Launcher is renamed to IntradocApp
, the following command line arguments are given to launch the Web Layout Editor:
IntradocApp WebLayout
This launches the Web Layout Editor as a standalone application.
By default, the application is launched without console output. However, when launching IdcServer, IdcAdmin, IdcCommandX, or the Installer, Java output is printed to the screen. In all other cases, the output is suppressed for a cleaner interface.
For some applications, such as the Batch Loader and the Repository Manager, it is desirable to view the Java output from the application. To force the Launcher to dump the Java output to the screen, use the -console
flag in this manner:
IntradocApp RepMan -console
The output is now written to the console from which the Repository Manager was launched.
If the Launcher is renamed IdcServer, BatchLoader, SystemProperties, or any other Java class that requires no additional parameters, it can be launched with a simple double-click. In other cases, a shortcut can be used to launch them by double-clicking.
To use the Launcher, you must first rename the Launcher.exe file to an executable with the same name as the class file to be launched. Typical examples include IdcServer.exe
or IntradocApp.exe
.
Note: If you want to make a custom application, you must create the custom directory, and rename the Launcher.exe file to the service that is to be launched. A valid intradoc.cfg file must be in the same directory as the executable. The only required parameter isIntradocDir ; however, other entries can be included to alter the way the Java application is launched. |
Configuration file example entries:
<?cfg jcharset="Cp1252"?>
#Content Server Directory Variables
IntradocDir=C:/domain/idcm1/
BASE_JAVA_CLASSPATH_source=$IdcResourcesDir/classesBASE_JAVA_CLASSPATH_serverlegacy=$SharedDir/classes/server.zipBASE_JAVA_CLASSPATH_server=$JLIB_DIR/idcserver.jar
This is sufficient to launch nearly all Content Server applications. Others, such as the Inbound Refinery, require additional classes in the classpath. This file can also be modified to enable Content Server to be run with different Java Virtual Machines.
The CLASSPATH
is designed to look for class files in order of the listed entries. In other words, the Launcher will search the entire DomainHome/ucm/idc/native/ directory before it looks in the resources/ directory or server.zip file. This is desirable if the users want to overload Java classes without patching the Zip file.
Additionally, the Launcher can be used to install, uninstall, and run Java applications as Windows Services, if they follow the correct API for communicating back to the Launcher. See the source code for IdcServer.java
or IdcAdmin.java
for more details on how to make any Java application run as a Windows service with the Launcher.
The COMPUTEDCLASSPATH
is used to add class files to the CLASSPATH
that the Launcher uses. To add class files, override this flag.
Note: The intradoc.cfg file is usually altered to include JDBC drivers for their particular database upon install. If you want to use alternate JDBC drivers, place them outside of the Content Server's IdcHomeDir , and alter the JDBC_JAVA_CLASSPATH_customjdbc entry in the intradoc.cfg file with the location of the driver. |
For example, to run Content Server with IBM's virtual machine on a Windows system, the command line would look like:
#customized for running IBM's VM JAVA_EXE=full path
When using a custom JVM, use the full path to the Java executable file to be used.
Caution: It is recommended that you not override the JVM command line. If you do so, start with the $IdcHomeDir/resources/core/config/launcher.cfg file. Customization is more complicated because of the custom classloader. |
If you choose to change which JVM you are using, and if that VM has all the standard Sun SDK jar files, then it is better to use the J2SDK
configuration entry to relocate the root directory of the SDK directory rather than use JAVA_EXE
to specify the location of the Java executable (this is not applicable for the IBM VM).
The J2SDK
variable changes the directory where the Sun SDK libraries are found (such as tools.jar). If you change this entry without setting the JAVA_EXE
entry then Java executables are assumed to be in the \bin directory of the path in J2SDK
. The default value for J2SDK
is ...\shared\os\win32\j2sdk1.4.2_04.
To add a value to $JAVA_OPTIONS
, use $JAVA_OPTIONS=
-server
or another similar value.
The following are commonly used command line options. Those options noted with an asterisk (*) are available on Windows platforms only. Unmarked options are available for Windows or UNIX platforms:
Option | Description |
---|---|
-console |
* Forces the Launcher to keep a Windows console window open so that the Java output and error streams are printed to the console. |
-debug |
Shows paths and variables in use at startup, and startup errors. Also enables Java debugging in Content Server; when repeated this increases verbosity. |
-fileDebug |
Similar to the -debug option but this option dumps debug data to the debug.log file. It is usually only set in JAVA_OPTIONS or JAVA_SERVICE_EXTRA_OPTIONS in the intradoc.cfg file to debug Windows services. |
-install |
* Used to install the Java application referred to by the Launcher as a Windows Service. |
-install_autostart |
* Similar to the -install option but this option installs the application to start when the server starts. |
-uninstall |
* Used to uninstall the Java application referred to by the Launcher as a Windows Service. |
-remove |
* Same as -uninstall . |
-dependent service-name |
* Makes the Windows service dependent on whether the service service-name is also running.
This command is useful when you want to make a dependent call for each service. For example, if you want to launch a database before starting the content server, you can specify the content server startup to be dependent on the database startup. |
-dependent user password |
* Used with -install , installs the service with the credentials of the user specified by user with password password.
This command will check the user regardless of the credentials, but may not install the service. The credentials of the user need to extend to the service for the auto-start to run the service automatically. For certain services, such as the Inbound Refinery, the last flag is required so the service can run with higher permissions. The user name must be in the typical Microsoft format DOMAIN\User. Once users change passwords, the service will not be able to log in, and therefore will not run. |
-help |
Provides verbose output on Launcher use. |
-version |
Displays the version number for the Launcher and exits. |
-asuser user password |
* Used during an install to install a service as a specified user with a specific password. |
-exec path _name |
Overrides the argv[0] setting. Used by the Launcher.sh to specify the target path_name because the target of the symlink does not know its source. |
-cfg configfilename |
Specifies additional config files to read before determining computed settings. |
-idcServiceName servicename |
* Specifies the name of the Windows service. This can used with -remove to uninstall another Content Server service without using that Content Server's Launcher (for example, if an entire installation directory has been removed). |
Tip: To customize the classpath to alter the system path to load Oracle .dll files, you can set teh pathway to:IDC_LIBRARY_PATH_customfiles=/path-to-customfiles Custom shared objects and .dll files must not be installed into IdcHomeDir. |
If you want to load custom .dlls, you should put them in the IdcHomeDir/native/win32/lib/ directory.
To use services remotely, you must have these files on the remote system:
DomainHome/ucm/cs/bin/IdcCommand.exe
DomainHome/ucm/cs/bin/intradoc.cfg (same file as on Content Server).
IntradocDir/config/config.cfg
In addition, the following configuration entries must be defined in the #Additional Variables
section of the config.cfg file on the remote system:
IntradocServerPort=4444
IntradocServerHostName=IP or DNS