Figure 37 Server Illustrated Parts Breakdown
1 Server chassis for eight 2.5-inch storage drives
2 Server chassis for four 2.5-inch storage drives and DVD drive
3 Server chassis for four 3.5-inch storage drives
4 SATA DVD drive
5 Front indicator module for server with four 3.5-inch storage drives
6 Four 3.5-inch storage drive configuration
7 Four and eight 2.5-inch storage drive configurations (In Oracle Engineered Systems, storage drive 7 in eight-drive systems might be populated with a remote battery module for the HBA card.)
8 Front indicator module for server with four or eight 2.5-inch storage drives
9 Disk backplanes
10 Fan modules
11 Chassis mid-wall
12 Processors Note: There is only one processor in single-processor systems and that processor is located in processor socket 0 (P0).
13 DIMMs Note: A maximum of eight DIMMs are supported in single-processor systems and the DIMMs must be installed in sockets associated with processor 0 (P0). No DIMM filler panels are required in vacant DIMM sockets associated with processors 0 (P0) or 1 (P1).
15 PCIe cards and the internal HBA card Note: PCIe slot 1 is nonfunctional in single-processor systems.
16 Top cover
17 PCIe riser
18 USB flash drives
19 Processor heatsinks Note: In single-processor systems, neither a heatsink nor a processor socket filler are installed in the processor socket 1 (P1). To protect the delicate processor socket pins, the cover that comes on the motherboard from manufacturing is left in place.
21 Power supplies
22 Not applicable