Use the following procedure to access Oracle System Assistant after you have started the server.
For more information, refer to the Installation , Setting Up Software and Firmware Using Oracle System Assistant.
Perform one of the following actions, depending on the server power state:
If the server is in standby power mode, press the Power button on the front of the server.
If the server is in full power mode, power the server off and on.
The BIOS screen appears with boot messages.
Note - If you use KVMS to access the server remotely, press F9 several times; otherwise, the server might miss the signal due to delays.
Power-on self-test messages are displayed as well as a line that states “Oracle System Assistant Selected.”
The Oracle System Assistant application is launched. The Launching Oracle System Assistant screen appears. Then the System Overview task screen appears.
If the Oracle System Assistant screen does not appear, see Troubleshooting Oracle System Assistant.