|Skip Navigation Links|
|Exit Print View|
|Oracle Solaris ZFS Administration Guide Oracle Solaris 10 8/11 Information Library|
The zpool list command provides several ways to request information regarding pool status. The information available generally falls into three categories: basic usage information, I/O statistics, and health status. All three types of storage pool information are covered in this section.
You can use the zpool list command to display basic information about pools.
With no arguments, the zpool list command displays the following information for all pools on the system:
# zpool list NAME SIZE ALLOC FREE CAP HEALTH ALTROOT tank 80.0G 22.3G 47.7G 28% ONLINE - dozer 1.2T 384G 816G 32% ONLINE -
This command output displays the following information:
The name of the pool.
The total size of the pool, equal to the sum of the sizes of all top-level virtual devices.
The amount of physical space allocated to all datasets and internal metadata. Note that this amount differs from the amount of disk space as reported at the file system level.
For more information about determining available file system space, see ZFS Disk Space Accounting.
The amount of unallocated space in the pool.
The amount of disk space used, expressed as a percentage of the total disk space.
The current health status of the pool.
For more information about pool health, see Determining the Health Status of ZFS Storage Pools.
The alternate root of the pool, if one exists.
For more information about alternate root pools, see Using ZFS Alternate Root Pools.
# zpool list tank NAME SIZE ALLOC FREE CAP HEALTH ALTROOT tank 80.0G 22.3G 47.7G 28% ONLINE -
You can use the zpool list interval and count options to gather statistics over a period of time. In addition, you can display a time stamp by using the -T option. For example:
# zpool list -T d 3 2 Tue Nov 2 10:36:11 MDT 2010 NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT pool 33.8G 83.5K 33.7G 0% 1.00x ONLINE - rpool 33.8G 12.2G 21.5G 36% 1.00x ONLINE - Tue Nov 2 10:36:14 MDT 2010 pool 33.8G 83.5K 33.7G 0% 1.00x ONLINE - rpool 33.8G 12.2G 21.5G 36% 1.00x ONLINE -
Specific statistics can be requested by using the -o option. This option provides custom reports or a quick way to list pertinent information. For example, to list only the name and size of each pool, you use the following syntax:
# zpool list -o name,size NAME SIZE tank 80.0G dozer 1.2T
The column names correspond to the properties that are listed in Listing Information About All Storage Pools or a Specific Pool.
The default output for the zpool list command is designed for readability and is not easy to use as part of a shell script. To aid programmatic uses of the command, the -H option can be used to suppress the column headings and separate fields by tabs, rather than by spaces. For example, to request a list of all pool names on the system, you would use the following syntax:
# zpool list -Ho name tank dozer
Here is another example:
# zpool list -H -o name,size tank 80.0G dozer 1.2T
ZFS automatically logs successful zfs and zpool commands that modify pool state information. This information can be displayed by using the zpool history command.
For example, the following syntax displays the command output for the root pool:
# zpool history History for 'rpool': 2010-05-11.10:18:54 zpool create -f -o failmode=continue -R /a -m legacy -o cachefile=/tmp/root/etc/zfs/zpool.cache rpool mirror c1t0d0s0 c1t1d0s0 2010-05-11.10:18:55 zfs set canmount=noauto rpool 2010-05-11.10:18:55 zfs set mountpoint=/rpool rpool 2010-05-11.10:18:56 zfs create -o mountpoint=legacy rpool/ROOT 2010-05-11.10:18:57 zfs create -b 8192 -V 2048m rpool/swap 2010-05-11.10:18:58 zfs create -b 131072 -V 1536m rpool/dump 2010-05-11.10:19:01 zfs create -o canmount=noauto rpool/ROOT/zfsBE 2010-05-11.10:19:02 zpool set bootfs=rpool/ROOT/zfsBE rpool 2010-05-11.10:19:02 zfs set mountpoint=/ rpool/ROOT/zfsBE 2010-05-11.10:19:03 zfs set canmount=on rpool 2010-05-11.10:19:04 zfs create -o mountpoint=/export rpool/export 2010-05-11.10:19:05 zfs create rpool/export/home 2010-05-11.11:11:10 zpool set bootfs=rpool rpool 2010-05-11.11:11:10 zpool set bootfs=rpool/ROOT/zfsBE rpool
You can use similar output on your system to identify the actual ZFS commands that were executed to troubleshoot an error condition.
The features of the history log are as follows:
The log cannot be disabled.
The log is saved persistently on disk, which means that the log is saved across system reboots.
The log is implemented as a ring buffer. The minimum size is 128 KB. The maximum size is 32 MB.
For smaller pools, the maximum size is capped at 1 percent of the pool size, where the size is determined at pool creation time.
The log requires no administration, which means that tuning the size of the log or changing the location of the log is unnecessary.
To identify the command history of a specific storage pool, use syntax similar to the following:
# zpool history tank History for 'tank': 2011-05-27.13:10:43 zpool create tank mirror c8t1d0 c8t2d0 2011-06-01.12:05:23 zpool scrub tank 2011-06-13.16:26:07 zfs create tank/users 2011-06-13.16:26:27 zfs create tank/users/finance 2011-06-13.16:27:15 zfs set users:dept=finance tank/users/finance
Use the -l option to display a long format that includes the user name, the host name, and the zone in which the operation was performed. For example:
# zpool history -l tank 2011-05-27.13:10:43 zpool create tank mirror c8t1d0 c8t2d0 [user root on neo:global] 2011-06-01.12:05:23 zpool scrub tank [user root on neo:global] 2011-06-13.16:26:07 zfs create tank/users [user root on neo:global] 2011-06-13.16:26:27 zfs create tank/users/finance [user root on neo:global] 2011-06-13.16:27:15 zfs set users:dept=finance tank/users/finance [user root ...]
Use the -i option to display internal event information that can be used for diagnostic purposes. For example:
# zpool history -i tank History for 'tank': 2011-05-27.13:10:43 zpool create tank mirror c8t1d0 c8t2d0 2011-05-27.13:10:43 [internal pool create txg:5] pool spa 33; zfs spa 33; zpl 5;... 2011-05-31.15:02:39 [internal pool scrub done txg:11828] complete=1 2011-06-01.12:04:50 [internal pool scrub txg:14353] func=1 mintxg=0 maxtxg=14353 2011-06-01.12:05:23 zpool scrub tank 2011-06-13.16:26:06 [internal create txg:29879] dataset = 52 2011-06-13.16:26:07 zfs create tank/users 2011-06-13.16:26:07 [internal property set txg:29880] $share2=2 dataset = 52 2011-06-13.16:26:26 [internal create txg:29881] dataset = 59 2011-06-13.16:26:27 zfs create tank/users/finance 2011-06-13.16:26:27 [internal property set txg:29882] $share2=2 dataset = 59 2011-06-13.16:26:45 [internal property set txg:29883] users:dept=finance dataset = 59 2011-06-13.16:27:15 zfs set users:dept=finance tank/users/finance
To request I/O statistics for a pool or specific virtual devices, use the zpool iostat command. Similar to the iostat command, this command can display a static snapshot of all I/O activity, as well as updated statistics for every specified interval. The following statistics are reported:
The amount of data currently stored in the pool or device. This amount differs from the amount of disk space available to actual file systems by a small margin due to internal implementation details.
For more information about the differences between pool space and dataset space, see ZFS Disk Space Accounting.
The amount of disk space available in the pool or device. As with the used statistic, this amount differs from the amount of disk space available to datasets by a small margin.
The number of read I/O operations sent to the pool or device, including metadata requests.
The number of write I/O operations sent to the pool or device.
The bandwidth of all read operations (including metadata), expressed as units per second.
The bandwidth of all write operations, expressed as units per second.
# zpool iostat capacity operations bandwidth pool alloc free read write read write ---------- ----- ----- ----- ----- ----- ----- rpool 6.05G 61.9G 0 0 786 107 tank 31.3G 36.7G 4 1 296K 86.1K ---------- ----- ----- ----- ----- ----- -----
Because these statistics are cumulative since boot, bandwidth might appear low if the pool is relatively idle. You can request a more accurate view of current bandwidth usage by specifying an interval. For example:
# zpool iostat tank 2 capacity operations bandwidth pool alloc free read write read write ---------- ----- ----- ----- ----- ----- ----- tank 18.5G 49.5G 0 187 0 23.3M tank 18.5G 49.5G 0 464 0 57.7M tank 18.5G 49.5G 0 457 0 56.6M tank 18.8G 49.2G 0 435 0 51.3M
In this example, the command displays usage statistics for the pool tank every two seconds until you type Control-C. Alternately, you can specify an additional count argument, which causes the command to terminate after the specified number of iterations. For example, zpool iostat 2 3 would print a summary every two seconds for three iterations, for a total of six seconds. If there is only a single pool, then the statistics are displayed on consecutive lines. If more than one pool exists, then an additional dashed line delineates each iteration to provide visual separation.
In addition to pool-wide I/O statistics, the zpool iostat command can display I/O statistics for virtual devices. This command can be used to identify abnormally slow devices or to observe the distribution of I/O generated by ZFS. To request the complete virtual device layout as well as all I/O statistics, use the zpool iostat -v command. For example:
# zpool iostat -v capacity operations bandwidth pool alloc free read write read write ---------- ----- ----- ----- ----- ----- ----- rpool 6.05G 61.9G 0 0 785 107 mirror 6.05G 61.9G 0 0 785 107 c1t0d0s0 - - 0 0 578 109 c1t1d0s0 - - 0 0 595 109 ---------- ----- ----- ----- ----- ----- ----- tank 36.5G 31.5G 4 1 295K 146K mirror 36.5G 31.5G 126 45 8.13M 4.01M c1t2d0 - - 0 3 100K 386K c1t3d0 - - 0 3 104K 386K ---------- ----- ----- ----- ----- ----- -----
Note two important points when viewing I/O statistics for virtual devices:
First, disk space usage statistics are only available for top-level virtual devices. The way in which disk space is allocated among mirror and RAID-Z virtual devices is particular to the implementation and not easily expressed as a single number.
Second, the numbers might not add up exactly as you would expect them to. In particular, operations across RAID-Z and mirrored devices will not be exactly equal. This difference is particularly noticeable immediately after a pool is created, as a significant amount of I/O is done directly to the disks as part of pool creation, which is not accounted for at the mirror level. Over time, these numbers gradually equalize. However, broken, unresponsive, or offline devices can affect this symmetry as well.
You can use the same set of options (interval and count) when examining virtual device statistics.
Resilver in-progress report. For example:
scan: resilver in progress since Thu May 26 11:26:32 2011 1.26G scanned out of 2.40G at 6.15M/s, 0h3m to go 1.26G resilvered, 56.3% done
Scrub in-progress report. For example:
scan: scrub in progress since Fri May 27 08:24:17 2011 18.0M scanned out of 2.35G at 8.99M/s, 0h4m to go 0 repaired, 0.75% done
Resilver completion message. For example:
scan: resilvered 2.34G in 1h2m with 0 errors on Thu May 26 11:56:40 2011
Scrub completion message. For example:
scan: scrub repaired 512B in 1h2m with 0 errors on Fri May 27 08:54:50 2011
Ongoing scrub cancellation message. For example:
scan: scrub canceled on Wed Fri Jun 10 09:06:24 2011
Scrub and resilver completion messages persist across system reboots
ZFS provides an integrated method of examining pool and device health. The health of a pool is determined from the state of all its devices. This state information is displayed by using the zpool status command. In addition, potential pool and device failures are reported by fmd, displayed on the system console, and logged in the /var/adm/messages file.
This section describes how to determine pool and device health. This chapter does not document how to repair or recover from unhealthy pools. For more information about troubleshooting and data recovery, see Chapter 11, Oracle Solaris ZFS Troubleshooting and Pool Recovery.
Each device can fall into one of the following states:
The device or virtual device is in normal working order. Although some transient errors might still occur, the device is otherwise in working order.
The virtual device has experienced a failure but can still function. This state is most common when a mirror or RAID-Z device has lost one or more constituent devices. The fault tolerance of the pool might be compromised, as a subsequent fault in another device might be unrecoverable.
The device or virtual device is completely inaccessible. This status typically indicates total failure of the device, such that ZFS is incapable of sending data to it or receiving data from it. If a top-level virtual device is in this state, then the pool is completely inaccessible.
The device has been explicitly taken offline by the administrator.
The device or virtual device cannot be opened. In some cases, pools with UNAVAIL devices appear in DEGRADED mode. If a top-level virtual device is UNAVAIL, then nothing in the pool can be accessed.
The device was physically removed while the system was running. Device removal detection is hardware-dependent and might not be supported on all platforms.
The health of a pool is determined from the health of all its top-level virtual devices. If all virtual devices are ONLINE, then the pool is also ONLINE. If any one of the virtual devices is DEGRADED or UNAVAIL, then the pool is also DEGRADED. If a top-level virtual device is FAULTED or OFFLINE, then the pool is also FAULTED. A pool in the FAULTED state is completely inaccessible. No data can be recovered until the necessary devices are attached or repaired. A pool in the DEGRADED state continues to run, but you might not achieve the same level of data redundancy or data throughput than if the pool were online.
# zpool status -x all pools are healthy
Specific pools can be examined by specifying a pool name in the command syntax. Any pool that is not in the ONLINE state should be investigated for potential problems, as described in the next section.
You can request a more detailed health summary status by using the -v option. For example:
# zpool status -v tank pool: tank state: DEGRADED status: One or more devices could not be opened. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Attach the missing device and online it using 'zpool online'. see: http://www.sun.com/msg/ZFS-8000-2Q scrub: scrub completed after 0h0m with 0 errors on Wed Jan 20 15:13:59 2010 config: NAME STATE READ WRITE CKSUM tank DEGRADED 0 0 0 mirror-0 DEGRADED 0 0 0 c1t0d0 ONLINE 0 0 0 c1t1d0 UNAVAIL 0 0 0 cannot open errors: No known data errors
This output displays a complete description of why the pool is in its current state, including a readable description of the problem and a link to a knowledge article for more information. Each knowledge article provides up-to-date information about the best way to recover from your current problem. Using the detailed configuration information, you can determine which device is damaged and how to repair the pool.
In the preceding example, the faulted device should be replaced. After the device is replaced, use the zpool online command to bring the device online. For example:
# zpool online tank c1t0d0 Bringing device c1t0d0 online # zpool status -x all pools are healthy
If the autoreplace property is on, you might not have to online the replaced device.
If a pool has an offline device, the command output identifies the problem pool. For example:
# zpool status -x pool: tank state: DEGRADED status: One or more devices has been taken offline by the administrator. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Online the device using 'zpool online' or replace the device with 'zpool replace'. scrub: resilver completed after 0h0m with 0 errors on Wed Jan 20 15:15:09 2010 config: NAME STATE READ WRITE CKSUM tank DEGRADED 0 0 0 mirror-0 DEGRADED 0 0 0 c1t0d0 ONLINE 0 0 0 c1t1d0 OFFLINE 0 0 0 48K resilvered errors: No known data errors
The READ and WRITE columns provide a count of I/O errors that occurred on the device, while the CKSUM column provides a count of uncorrectable checksum errors that occurred on the device. Both error counts indicate a potential device failure, and some corrective action is needed. If non-zero errors are reported for a top-level virtual device, portions of your data might have become inaccessible.
The errors: field identifies any known data errors.
In the preceding example output, the offline device is not causing data errors.
The zpool status command displays the following scrub and resilver information:
For more information about diagnosing and repairing faulted pools and data, see Chapter 11, Oracle Solaris ZFS Troubleshooting and Pool Recovery.
You can use the zpool status interval and count options to gather statistics over a period of time. In addition, you can display a time stamp by using the -T option. For example:
# zpool status -T d 3 2 zpool status -T d 3 2 Tue Nov 2 10:38:18 MDT 2010 pool: pool state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM pool ONLINE 0 0 0 c3t3d0 ONLINE 0 0 0 errors: No known data errors pool: rpool state: ONLINE scan: resilvered 12.2G in 0h14m with 0 errors on Thu Oct 28 14:55:57 2010 config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 c3t0d0s0 ONLINE 0 0 0 c3t2d0s0 ONLINE 0 0 0 errors: No known data errors Tue Nov 2 10:38:21 MDT 2010 pool: pool state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM pool ONLINE 0 0 0 c3t3d0 ONLINE 0 0 0 errors: No known data errors pool: rpool state: ONLINE scan: resilvered 12.2G in 0h14m with 0 errors on Thu Oct 28 14:55:57 2010 config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 c3t0d0s0 ONLINE 0 0 0 c3t2d0s0 ONLINE 0 0 0 errors: No known data errors