Network connection

Is the system connected to a network?

Networked/Nonnetworked

Auto Registration, a feature of Oracle Solaris

Do you want to provide your support credentials and proxy information for Auto Registration with Oracle? See What is Auto Registration?

My Oracle Support user name and password

Proxy server host name and port number

HTTP proxy user name and password

Network security

Starting with the Solaris 10 11/06 release, you have the option during an initial installation to change the network security settings so that all network services, except Secure Shell, are disabled or restricted to respond to local requests only. This security option is only available during an initial installation, not during an upgrade. An upgrade maintains any previously set services. If necessary, you can restrict network services after an upgrade by using the netservices command.

During the installation, you can select restricted network security. Or, you can enable a larger set of services as in previous Solaris releases. If in doubt, you can safely select the restricted network security option, because any services can be individually enabled after installation. For further information about these options, see Planning Network Security.

The network services can be enabled after installation by using the netservices open command or by enabling individual services by using SMF commands. See Revising Security Settings After Installation.

Restricted/Open network security

DHCP

Can the system use Dynamic Host Configuration Protocol (DHCP) to configure its network interfaces?

DHCP provides the network parameters that are necessary for installation.

Yes/No*

If you are not using DHCP, note the network address.

IP Address

If you are not using DHCP, supply the IP address for the system.

Example: 172.31.255.255

To find this information on a running system, type the following command.

# ypmatch host-name hosts

Subnet

If you are not using DHCP, is the system part of a subnet?

If yes, what is the netmask of the subnet?

Example: 255.255.255.0

To find this information on a running system, type the following command.

# more /etc/netmasks

IPv6

Do you want to enable IPv6 on this machine?

IPv6 is a part of the TCP/IP Internet protocol that facilitates IP addressing by adding better security and increasing Internet addresses.

Yes/No*

Host name

Host name that you choose for the system.

To find this information on a running system, type the following command.

# uname -n

Kerberos

Do you want to configure Kerberos security on this machine?

If yes, gather this information:

Yes/No*

Default Realm:

Administration Server:

First KDC:

(Optional) Additional KDCs:

The Kerberos service is a client-server architecture that provides secure transactions over networks.

If the system uses a naming service, provide the following information.

Naming Service

Which naming service should this system use?

To find this information on a running system, type the following command.

# cat /etc/nsswitch.conf

A naming service stores information in a central place, which enables users, machines, and applications to communicate across the network. Examples of information that is stored are host names and addresses or user names and passwords.

NIS+/NIS/DNS/ LDAP/None

Domain Name

Provide the name of the domain in which the system resides.

During installation, you can choose the default NFSv4 domain name. Or, you can specify a custom NFSv4 domain name.

• For instructions about how to find the domain name on a running system, see Checking for the NFS Version 4 Domain in System Administration Guide: Network Services

• To preconfigure the NFSv4 domain name in the sysidcfg file, see nfs4_domain Keyword in Oracle Solaris 10 8/11 Installation Guide: Network-Based Installations

NIS+ and NIS

Do you want to specify a name server or let the installation program find one?

If you want to specify a name server, provide the following information.

Specify one/Find one*

Server's host name:

• For NIS clients, type the following command to display the server's host name.

  # ypwhich

• For NIS+ clients, type the following command to display the server's host name.

  # nisping

Server's IP Address:

• For NIS clients, type the following command to display the server's IP address.

  # ypmatch nameserver-name hosts

• For NIS+ clients, type the following command to display the server's IP address.

  # nismatch nameserver-name hosts.org_dir

Network Information Service (NIS) makes network administration more manageable by providing centralized control over a variety of network information, such as machine names and addresses.

DNS

Provide IP addresses for the DNS server. You must enter at least one IP address, but you can enter up to three addresses.

Server's IP Address:

To display the server's IP address, type the following command.

# getent hosts dns

You can enter a list of domains to search when a DNS query is made.

List of domains to be searched:

The domain name system (DNS) is the naming service that the Internet provides for TCP/IP networks. DNS provides host names to the IP address service. DNS simplifies communication by using machine names instead of numerical IP addresses. DNS also serves as a database for mail administration.

LDAP

Provide the following information about your LDAP profile.

Profile Name:

Profile Server:

If you specify a proxy credential level in your LDAP profile, gather this information.

Proxy-bind distinguished name:

Proxy-bind password:

Lightweight Directory Access Protocol (LDAP) defines a relatively simple protocol for updating and searching directories that are running over TCP/IP.

Default route

Do you want to specify a default route IP address or let the Oracle Solaris installation program find one?

The default route provides a bridge that forwards traffic between two physical networks. An IP address is a unique number that identifies each host on a network.

You have the following choices:

• You can specify the IP address. An /etc/defaultrouter file is created with the specified IP address. When the system is rebooted, the specified IP address becomes the default route.

• You can let the Oracle Solaris installation program detect an IP address. However, the system must be on a subnet that has a router that advertises itself by using the ICMP router discovery protocol. If you are using the command-line interface, the software detects an IP address when the system is booted.

• You can choose None if you do not have a router or do not want the software to detect an IP address at this time. The software automatically tries to detect an IP address on reboot.

Detect one*/Specify one/None

Time zone

How do you want to specify your default time zone?

Geographic region*

Offset from GMT

Time zone file

Root password

Provide the root password for the system.

Keyboard

This feature is new in the following releases:

• For SPARC, starting with the Solaris 10 10/06 release

• For x86, starting with the Solaris 10 8/07 release

If the keyboard is self-identifying, the keyboard language and layout automatically configures during installation. If the keyboard is not self-identifying, the sysidkdb tool provides you, during the installation, a list of supported keyboard layouts during installation, so that you can select a layout for keyboard configuration.

SPARC: Previously, the USB keyboard assumed a self-identifying value of 1 during the installation. Therefore, all of the keyboards that were not self-identifying always configured for a U.S. English keyboard layout during installation.

For further information, see Preconfiguring With the sysidcfg File in Oracle Solaris 10 8/11 Installation Guide: Network-Based Installations.

Locales

For which geographic regions do you want to install support?

SPARC: Power Management (only available on SPARC systems that support Power Management)

Do you want to use Power Management?

Yes*/No

Automatic reboot or CD/DVD ejection

Reboot automatically after software installation?

Eject CD/DVD automatically after software installation?

Yes*/No

Yes*/No

Default or custom installation

Do you want to perform a default installation, or customize the installation?

• Select Default installation to format the entire hard disk and install a preselected set of software.

• Select Custom installation to modify the hard disk layout and select the software that you want to install.

Default installation*/Custom installation

Software group

Which Oracle Solaris Software Group do you want to install?

Entire Plus OEM

Entire*

Developer

End User

Core

Reduced Networking

Custom package selection

Do you want to add or remove software packages from the Oracle Solaris Software Group that you install?

Select disks

On which disks do you want to install the Oracle Solaris software?

Example: c0t0d0

x86: fdisk partitioning

Do you want to create, delete, or modify a Oracle Solaris fdisk partition?

Each disk that is selected for file system layout must have a Oracle Solaris fdisk partition.

If your system currently has a Service partition, the Oracle Solaris installation program preserves the Service partition by default. If you do not want to preserve the Service partition, you must customize the fdisk partitions. For more information about preserving a Service partition, see Default Boot-Disk Partition Layout Preserves the Service Partition.

Select Disks for fdisk Partition Customization?

Yes/No*

Customize fdisk partitions?

Yes/No*

Preserve Data

Do you want to preserve any data that exists on the disks where you are installing the Oracle Solaris software?

Yes/No*

Auto-layout file systems

Do you want the installation program to automatically lay out file systems on your disks?

If yes, which file systems should be used for auto-layout?

Example: /, /opt, /var

If no, you must provide file system configuration information.

Yes*/No

Mount remote file systems

Does this system need to access software on another file system?

If yes, provide the following information about the remote file system.

Yes/No*

Server:

IP Address:

Remote File System:

Local Mount Point:

If you are installing through a tip line, follow these instructions.

Ensure that your window display is at least 80 columns wide and 24 rows long. For more information, see tip(1).

To determine the current dimensions of your tip window, use the stty command. For more information, see the man page, stty(1).

Check your Ethernet connection.

If the system is part of a network, verify that an Ethernet connector or similar network adapter is connected to your system.

Review the planning chapter and other relevant documentation.

• Review the entire planning chapter or specific sections in Chapter 4, System Requirements, Guidelines, and Upgrade (Planning).

• Review the Oracle Solaris 10 8/11 Release Notes on http://www.oracle.com/technetwork/indexes/documentation/index.html and vendor release notes to ensure that the software you use is supported in the new Oracle Solaris release.

• Review the following to ensure that your hardware is supported:

  • Oracle Solaris Hardware Compatibility List

  • SPARC: Oracle Solaris Sun Hardware Platform Guide at http://www.oracle.com/technetwork/indexes/documentation/index.html

• Review the documentation that accompanied your system to ensure that your system and devices are supported by the Solaris release.