| Skip Navigation Links | |
| Exit Print View | |
|
Oracle Solaris Administration: SAN Configuration and Multipathing Oracle Solaris 11 Information Library |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Oracle Solaris Administration: SAN Configuration and Multipathing Oracle Solaris 11 Information Library |
1. Solaris I/0 Multipathing Overview
What's New in Solaris I/O Multipathing?
Overview of Solaris I/O Multipathing
Fibre Channel Software Features
Solaris I/O Multipathing Features
2. Fibre Channel Multipathing Configuration Overview
3. Configuring Solaris I/O Multipathing Features
4. Administering Multipathing Devices (mpathadm)
6. Configuring Virtual Fibre Channel Ports
9. Configuring IPFC SAN Devices
10. Booting the Solaris OS From Fibre Channel Devices on x86 Systems
11. Persistent Binding for Tape Devices
A. Manual Configuration for Fabric-Connected Devices
Solaris I/O multipathing features is based on open standards for communicating with devices and device management, ensuring interoperability with other standards-based devices and software. The following standards are supported by Solaris I/O multipathing features:
ANSI Standard: Information Technology – SNIA Multipath Management API Specification (ANSI INCITS 412-2006)
T10 standards, including SCSI-3, SAM, FCP, SPC, and SBC
T11.3 FC standards, including FC-PH, FC-AL, FC-LS, and FC-GS
T11.5 storage management standards, including FC-HBA
IETF standards, including RFC 2625
Serial Attached SCSI-2 (SAS2)
|