Skip Navigation Links | |
Exit Print View | |
Oracle Solaris Administration: SAN Configuration and Multipathing Oracle Solaris 11 Information Library |
1. Solaris I/0 Multipathing Overview
2. Fibre Channel Multipathing Configuration Overview
3. Configuring Solaris I/O Multipathing Features
4. Administering Multipathing Devices (mpathadm)
6. Configuring Virtual Fibre Channel Ports
SAS Multipathing Considerations
9. Configuring IPFC SAN Devices
10. Booting the Solaris OS From Fibre Channel Devices on x86 Systems
11. Persistent Binding for Tape Devices
A. Manual Configuration for Fabric-Connected Devices
Adding and removing SAS devices is performed dynamically when using the mpt driver. You are no longer required to edit the sd.conf file to enable your system to detect specific targets and LUNs attached with the mpt driver. For more information see mpt(7D) and mpt_sas(7D).
If you add or remove a device in your SAS domain, messages are written to the /var/adm/messages file indicating presence or removal. If a device has been added, it is visible to and available by the format command.