Skip Navigation Links | |
Exit Print View | |
Sun Dual 10 GbE PCIe 2.0 Fibre Channel Over Ethernet Software User's Guide |
Understanding the FCoE Software
Installation Overview (Windows)
Enabling the FCoE Software (Linux)
Enable FCoE During the Linux Installation
Enable FCoE After a Linux Installation
Resolve SAN-Boot Errors (RHEL6.0/OL6.0)
Remove the FCoE Software Package (Linux)
Installing the FCoE Software (Windows)
Upgrade Guidelines for Software Release 15.4 (Windows)
Validation and Storage Certification
Download and Install the Driver (Windows)
Verify the Functionality of the Network Interface
Boot Over a 10GbE Network (Linux)
Set Up the FCoE Boot Option ROM (Windows)
Configure the Brocade 8000 Series Switch
Configuring Driver Parameters (Linux)
Driver Parameter Settings (Linux)
For the Cisco Nexus switch, you first create a virtual interface to bind the Ethernet port to the FC forwarder (FCF).
The following instructions use port 1/3 as the example port.
# configure # interface ethernet 1/3 # switchport mode trunk # spanning-tree port type edge trunk # exit
# configure # interface vfc 3 # bind interface ethernet 1/3 # no shutdown # exit
Note - For more configuration information, go to the Cisco Nexus 5000 series switches documentation at: http://www.cisco.com/en/US/products/ps9670/tsd_products_support_series_home.html