Oracle® Fusion Applications Enterprise Deployment Guide 11g Release 1 (11.1.2) Part Number E16684-04 |
|
|
PDF · Mobi · ePub |
This chapter describes how to scale out the Oracle Fusion Common domain.
This chapter includes the following topics:
Section 8.2, "Prerequisites for Scaling Out the Oracle Fusion Common Domain"
Section 8.3, "Adding a New Machine in the Oracle WebLogic Server Console"
Section 8.5, "Packing and Unpacking the Managed Server Domain Home"
Section 8.6, "Cloning Managed Servers and Assigning Them to CRMHOST2"
The Oracle Fusion Common domain is shared by all Oracle Fusion Applications product families. Oracle Fusion Customer Relationship Management implementation is dependent on the Oracle Fusion Common domain for the following components:
Oracle Fusion Functional Setup Manager, for all setup task flows
Help Portal, for centralized help
Home page application, which has the Oracle Fusion Customer Relationship Management home page and launch pad
Oracle Universal Content Management (WebCenter Content), to store all marketing collateral as well as all attachments. Import flow also uses WebCenter Content to stage the CSV files that the user uploads
Oracle Secure Enterprise Search
Oracle WebCenter Community Space and forums
Oracle WebLogic Communication Services (OWLCS) and Oracle WebLogic SIP Server
Figure 8-1 shows the Oracle Fusion Common domain within the overall reference enterprise deployment topology for Oracle Fusion Applications.
Before you begin, ensure the following:
Node Manager has been started in the Secure Sockets Layer (SSL) mode by following the instructions in Chapter 6, "Configuring Node Manager"
You are starting with a clean machine if it is the first time it is being used for a scale out
The /etc/hosts
file has proper entries. To verify, ping this machine with the fully qualified name of the machine
The user created on CRMHOST2
should the same as the user on CRMHOST1
The directory structure /u01/oracle
is mounted to same shared file system as CRMHOST1
The directory structure /u02/local/oracle/config
on CRMHOST2
has been created
The initial Oracle Fusion Customer Relationship Management deployment on CRMHOST1
has already been done and verified by provisioning
To add a new machine:
Log in to the Administration Server: http://
commoninternal
.mycompany.com:7777/console
.
Navigate to CommonDomain > Environment > Machines.
LocalMachine is located in the right-hand pane.
In the left-hand pane, click Lock & Edit.
In the right-hand pane, first click New to add the remote machine, and then specify the following:
Name - enter CRMHOST2
Machine operating system - Unix
Click Next.
In the window that opens, set the following attributes:
Type - SSL
Listen Address - <CRMHOST2
>
Note:
The "localhost" default value here is wrong.
Listen port - 5556
Click Finish and activate the changes.
Note:
If you get an error when activating the changes, see Section 19.8.18, "Administration Console Redirects from Internal URL to Container URL after Activation" for the temporary solution.
Scaling out WebCenter Content involves two tasks:
Do the following prior to performing the steps in Section 8.5, "Packing and Unpacking the Managed Server Domain Home":
Move the CRMHOST1
/u02/local/oracle/config/domains/
CRMHOST1
/CommonDomain/ucm/cs
directory from the local to the shared location: ORACLE_BASE
/config/domains/
CRMHOST1
/CommonDomain/ucm/cs
.
In the ORACLE_BASE
/config/domains/CRMHOST1/CommonDomain/ucm/cs/bin/intradoc.cfg
file, create the variables intradocDir
, vaultDir
, and weblayoutDir
so that they point to the shared location, ORACLE_BASE
/config/domains/
CRMHOST1
/CommonDomain/ucm/cs
.
You also must scale out the WebCenter Content Inbound Refinery server.
Note:
/u02/local/oracle/config/domains/
CRMHOST1
/CommonDomain/ucm/ibr
on CRMHOST1
must already be on the local disk.
Do the following after performing the steps in Section 8.5, "Packing and Unpacking the Managed Server Domain Home" and Section 8.6, "Cloning Managed Servers and Assigning Them to CRMHOST2":
Edit the /u02/local/oracle/config/domains/CRMHOST1/CommonDomain/ucm/ibr/config/config.cfg
file on CRMHOST1
with the following:
IDC_Name=CRMHOST1usoraclecom7012
(In this instance, CRMHOST1
is not the fully qualified name.)
InstanceMenuLabel=CRMHOST1usoraclecom7012
SocketHostAddressSecurityFilter=127.0.0.1|cluster node's addresses|
CRMHOST1
IP ADDRESS|
CRMHOST2
IP ADDRESS|0.0.0.0.0.0.0.1
(Include the cluster node's addresses.)
HttpServerAddress=
CRMHOST1
:7012
(CRMHOST1
's server address instead of load balancer, as it is a singleton node.)
Start the UCM_server2
server.
Navigate to http://CRMHOST2:7012/ibr
(CRMHOST2
's ibr
) and log in when prompted.
The post-installation configuration page displays, as it is not a clustered node.
On the post-installation configuration page:
Set the intradoc
server port to 7035.
Ensure the port has both a unique IDC_Name and unique local paths on CRMHOST2
.
Set the Incoming Socket Connection Address Security Filter:
SocketHostAddressSecurityFilter=127.0.0.1| cluster node's addresses|CRMHOST1 IP ADDRESS|CRMHOST2 IP ADDRESS|0.0.0.0.0.0.0.1
Click Submit.
Navigate to http://CRMHOST1:7012/cs
and select Administration > providers.
ibrprovider is already defined in this list.
Add a new outgoing provider:
Click Add.
Set the values to match the values of ibrprovider.
Set the HTTP host name to be second host address's CRMHOST2
IP address.
Restart the UCM_server1
and UCM_server2
servers.
Navigate to Inbound Refinery on second node: http://CRMHOST2:7012/ibr
.
Select Conversion Settings and update the primary web rendition.
Navigate to Third-Party Applications Settings > General OutsideIn Filter Options > Options and set the following path to the fonts: /usr/share/X11/fonts/TTF
.
Note:
The font location can be specific to the operating system.
Restart the UCM_server2
server.
Create a COMMONUCMVH1
TCP VIP on the load-balancing router (LBR) with CRMHOST1
:7012
and CRMHOST2
:7012
as its members.
After scaling out the Oracle WebCenter Portal managed server, do the following:
Log in to: http://commoninternal.mycompany.com:7777/em
.
Navigate to WebCenter > WebCenter_managedserver > WebCenter (top left of right pane) > Content repository > Oracle Content Server > Edit > RIDC Socket type (in Connection details).
Select Socket and enter COMMONUCMVH1
as the host.
Restart the Oracle WebCenter Portal managed servers.
Since the CRMHOST1
domain directory file system is also available from CRMHOST2
, both pack
and unpack
commands can be executed from CRMHOST2
.
To pack and unpack the Managed Server domain home:
Change directory to ORACLE_BASE
/products/fusionapps/oracle_common/common/bin
.
Run the pack
command:
CRMHOST2> ./pack.sh -managed=true -domain=ORACLE_BASE/config/domains/ CRMHOST1/CommonDomain -template=ORACLE_BASE/user_templates/ CommonDomain_managed.jar -template_name="Common_Managed_Server_Domain"
Ensure that /u02/local/oracle/config/domains/
CRMHOST2
/CommonDomain
is empty, and then run the unpack
command:
CRMHOST2> ./unpack.sh -domain=/u02/local/oracle/config/domains/CRMHOST2/ CommonDomain -template=ORACLE_BASE/user_templates/CommonDomain_managed.jar
Here, ORACLE_BASE
is shared, and /u02/local
is local to CRMHOST2
.
To add a managed server and assign it to CRMHOST2
:
Log in to the Administration Server: http://
commoninternal
.mycompany.com:7777/console
.
Navigate to CommonDomain > Environment > Servers.
Switch to Lock & Edit mode.
Select the Managed_Server checkbox (for example, HomePageServer_1) and then click Clone.
Specify the following Server Identity attributes:
Server Name - HomePageServer_2
Note:
To ensure consistency in naming, copy the name of the server shown in Server Identity and paste it into the Server Name field. Then change the number to "_2".
Server Listen Address - <CRMHOST2
>
Server Listen Port - leave "as is"
Click OK.
You now should see the newly cloned sales server, HomePageServer_2
.
Click HomePageServer_2 and change the following attributes:
Machine - <CRMHOST2
>
Cluster Name - accept the default, HomePageCluster
Note:
Ensure that this cluster name is the same as the cluster name of the original managed server.
Click Save and then Activate Changes.
From the Name column, click the HomepageServer_2 scaled-out server link.
Click Lock & Edit, and then select the Configuration tab.
Select the Keystores tab, and then ensure that the keystores value is Custom Identity and Custom Trust.
Do the following:
Change the Custom Identity Keystore path to point to the ORACLE_BASE
/products/fusionapps/wlserver_10.3/server/lib/
CRMHOST2
_fusion_identity.jks
file.
Leave the Custom Identity Keystore type blank.
Change the Custom Identity Keystore Passphrase entry. This should be the same as the keystorepassword field described in the first bullet in Step 4 in Section 6.2, "Creating the Identity Keystore on CRMHOST2."
Re-enter the Confirm Custom Identity Keystore Passphrase.
Ensure that the Confirm Custom Trust Keystore path is pointing to the ORACLE_BASE
/products/fusionapps/wlserver_10.3/server/lib/fusion_trust.jks
file.
Leave the Custom Trust Keystore type blank.
Change the Custom Trust Keystore Passphrase entry. This should be the same as the keystorepassword field described in the first bullet in Step 4 in Section 6.2, "Creating the Identity Keystore on CRMHOST2."
Re-enter the Custom Trust Keystore Passphrase.
Click Save.
Select the SSL tab.
Make sure that Identity and Trust Locations is set to Keystores.
Change the Private Key Alias to CRMHOST2
_fusion
.
Change the Private Key Passphrase to the keypassword, as described in the second bullet in Step 4 in Section 6.2, "Creating the Identity Keystore on CRMHOST2."
Re-enter the keypassword from Step c for the Confirm Private Key Passphrase.
Click Save.
Select the Server Start tab.
Change the Arguments to reflect the name of your cloned managed server and make sure the server group is the correct cluster name. For example, you should see the following:
-DJDBCProgramName\=DS/CommonDmain/HomePageServer_2 -Dserver.group\=HomePageCluster
Click Save.
Select the Logging tab, and then select the HTTP tab.
Do the following:
Change the Log file name to logs/access.log.%yyyyMMdd%
.
Change the rotation type to By Time.
Leave the Limit number of retained files option unchecked.
Leave the Rotate log file on startup option unchecked.
Click Save.
Expand Advanced.
Change the format to Extended.
Change the extended logging format fields to the following:
date time time-taken cs-method cs-uri sc-status sc(X-ORACLE-DMS-ECID) cs(ECID-Context) cs(Proxy-Remote-User) cs(Proxy-Client-IP)
Click Save.
Click Activate Changes.
Repeat Steps 2 to 17 for all the managed servers on this domain.
Set the following environment variable on CRMHOST2
:
WLST_PROPERTIES="-Dweblogic.security.SSL.trustedCAKeyStore=ORACLE_BASE/
products/fusionapps/wlserver_10.3/server/lib/fusion_trust.jks"
Stop the domain's Administration Server:
CRMHOST1> ORACLE_BASE/config/domains/CRMHOST1/CommonDomain/bin/stopWebLogic.sh
Restart the domain's Administration Server:
CRMHOST2> ORACLE_BASE/products/fusionapps/wlserver_10.3/common/bin/wlst.sh CRMHOST2> nmConnect(username='<username>', password='<password>', domainName='CommonDomain', host='CRMHOST1',port='5556', nmType='ssl', domainDir='ORACLE_BASE/config/domains/CRMHOST1/CommonDomain') CRMHOST2> nmStart('AdminServer')
Note:
The username and password used in the nmConnect
are the Node Manager credentials (username and password) specified when creating the provisioning plan. This is shown in Figure 4-3 in "Using the Provisioning Process to Install Components for an Enterprise Deployment".
For the wlcs_sipstate2
scaled-out server only, do the following:
Change directory to:
ORACLE_BASE/config/domains/CRMHOST1/CommonDomain/config/custom
In the datatier.xml
file, after the following line:
<server-name>wlcs_sipstate1</server-name>
add
<server-name>wlcs_sipstate2<server-name>
Run the newly created managed server:
Log in to the Administration Server: http://
commoninternal
.mycompany.com:7777/console
.
Navigate to CommonDomain > Environment > Servers > Control.
Select the newly created managed server and click Start.
Navigate to CommonDomain > Environment > Servers and check the State to verify that the newly created managed servers are running.
To configure Oracle HTTP Server:
On WEBHOST1
:
Change directory to ORACLE_BASE
/config/CommonDomain_webtier/config/OHS/ohs1/moduleconf
.
Copy FusionVirtualHost_fs.conf
to FusionVirtualHost_fs.conf.org
.
Edit the FusionVirtualHost_fs.conf
file, adding the scaled-out host and port to all the WebLogic Application Clusters. Example 8-1 shows sample code for HomePageServer.
Repeat Step 2 for all applications.
Restart Oracle HTTP Server: cd
to ORACLE_BASE
/config/CommonDomain_webtier/bin
and enter the following:
WEBHOST1> ./opmnctl stopall WEBHOST1> ./opmnctl startall
You should verify URLs to ensure that the appropriate routing and failover are working.
To verify the URLs:
Log in to the CommonDomain
Oracle WebLogic Server Administration Console and stop all the managed servers on the CRMHOST1
while the managed servers on CRMHOST2
are running.
Access the following URLs to verify that routing and failover are functioning properly. (Ensure the log in prompt is visible.)
https://commonexternal.mycompany.com/helpPortal/faces/AtkHelpPortalMain
https://commonexternal.mycompany.com/homePage/faces/AtkHomePageWelcome
Log in to the CommonDomain
Oracle WebLogic Server Administration Console and stop all the managed servers on CRMHOST2
.
Start the managed servers on CRMHOST1
.
Repeat Step 2. (Ensure the log in prompt is visible.)
Start all the managed servers on CRMHOST2
and verify that they are running on CRMHOST1
.