Verify the Installation (Oracle SPARC)

Before You Begin

1. Power on the system.
2. When the banner appears, press the Stop-A key sequence to interrupt the boot process and display the OpenBoot (ok) prompt.
3. List the network devices on your system.

   ok show-nets
   a) /niu@480/network@0
   b) /pci@400/pci@2/pci@0/pci@c/network@0,3
   c) /pci@400/pci@2/pci@0/pci@c/network@0,2
   d) /pci@400/pci@2/pci@0/pci@c/network@0,1
   e) /pci@400/pci@2/pci@0/pci@c/network@0
   f) /pci@400/pci@2/pci@0/pci@a/network@0,1
   g) /pci@400/pci@2/pci@0/pci@a/network@0
   q) NO SELECTION
   Enter Selection, q to quit: q

   ---

   Note - Checking the .properties output for each device is the surest way to identify the device.

   ---

4. Check the .properties output for each device.

   The following examples assume that /pci@400/pci@2/pci@0/pci@a/network@0,1 is a port on the adapter.

   1. Move to the device directory.

      ok cd /pci@400/pci@2/pci@0/pci@a/network@0,1

   2. Display properties for the device.

      ok .properties

      The output should be similar to the following:

      ok .properties
      assigned-addresses       82030010 00000000 00100000 00000000 00100000
                               8203001c 00000000 00200000 00000000 00004000
                               82030030 00000000 00200000 00000000 00080000
      local-mac-address        a0 36 9f 02 30 f6
      version                  Sun Dual Port GbE PCIe 2.0 Low Profile Adapter, MMF
                               FCode version 3.11 1/25/12
      phy-type                 pcs
      reg                      00030000 00000000 00000000 00000000 00000000
                               02030010 00000000 00000000 00000000 00100000
                               0203001c 00000000 00000000 00000000 00004000
                               02030030 00000000 00000000 00000000 00080000
      board-model              7014747
      model                    SUNW,pcie-igb
      compatible               pciex8086,1522.108e.7b19.1
                               pciex8086,1522.108e.7b19
                               pciex8086,1522.1
                               pciex8086,1522
                               pciexclass,020000
                               pciexclass,0200
      address-bits             00000030
      max-frame-size           00002400
      network-interface-type   ethernet
      device_type              network
      name                     network
      fcode-rom-offset         00000000
      interrupts               00000001
      cache-line-size          00000010
      class-code               00020000
      subsystem-id             00007b19
      subsystem-vendor-id      0000108e
      revision-id              00000001
      device-id                00001522
      vendor-id                00008086

      If you do not see the device listed, check that the adapter is properly seated. If necessary, reinstall the adapter (see Install the Adapter).

   3. Type the following when you finish looking at the .properties values.

      ok device-end

Related Information

• Install the Adapter

• Verify the Installation (Oracle Solaris x86)