Skip Navigation Links | |
Exit Print View | |
![]() |
Sun Dual Port GbE PCIe 2.0 Low Profile Adapter, MMF User's Guide |
Understanding the Installation Process
Installation Overview (Oracle Solaris 10)
Installation Overview (Oracle Solaris 11)
Installation Overview (Windows)
Front Panel Connectors and LEDs
Power and Environmental Requirements
Verify the Driver Version (Oracle Solaris 10)
Verify the Driver Version (Oracle Solaris 11)
Remove the Driver (Oracle Solaris OS)
Download and Install the Driver (Linux)
Download and Install the Driver (Windows)
Verify the Installation (Oracle SPARC)
Verify the Installation (Oracle Solaris x86)
Verify the Installation (Linux)
Verify the Installation (Windows)
Create Driver Instance Files (Oracle Solaris 10)
Configure the Network Host Files (Oracle Solaris 10)
Boot Over a GbE Network (Oracle Solaris x86 and Linux)
Install Oracle Solaris 10 Over a Network (Oracle SPARC)
Administering Driver Parameters and Jumbo Frames
Driver Parameters (Oracle Solaris OS)
Set Driver Parameters (Oracle Solaris OS)
Configuring Jumbo Frames (Oracle Solaris OS)
Change the MTU Temporarily (Oracle Solaris 10)
Change the MTU Temporarily (Oracle Solaris 11)
Configure Jumbo Frames (Linux)
Configure Link Aggregations (Oracle Solaris 10)
Delete Link Aggregations (Oracle Solaris 10)
Configure Static VLANs (Oracle Solaris 10)
Analyze Why the Device Link Is Missing
The ifconfig(1M) and dladm(1M) commands provide different details about link aggregations, as in the following examples.
Use the ifconfig(1M) command to examine the details about a link aggregation.
The following examples display the information about the two link aggregations created in Configure Link Aggregations (Oracle Solaris 10).
# ifconfig aggr1 aggr1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 32 inet 192.2.2.84 netmask ffffff00 broadcast 192.2.2.255 ether 0:15:17:75:ff:81 # ifconfig aggr2 aggr2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 33 inet 193.2.2.84 netmask ffffff00 broadcast 193.2.2.255 ether 0:15:17:75:ff:83
Use the dladm show-aggr command to show link aggregation status.
Use the dladm show-aggr -s command to show link aggregation statistics.
Use the dladm show-aggr -L command to display LACP-specific information.