Skip Navigation Links | |
Exit Print View | |
Oracle Solaris 10 1/13 Installation Guide: Network-Based Installations Oracle Solaris 10 1/13 Information Library |
Part I Planning to Install Over the Network
1. Where to Find Oracle Solaris Installation Planning Information
2. Preconfiguring System Configuration Information (Tasks)
3. Preconfiguring With a Naming Service or DHCP
Part II Installing Over a Local Area Network
4. Installing From the Network (Overview)
5. Installing From the Network With DVD Media (Tasks)
About Installing From the Network
Task Map: Installing From the Network With DVD Media
Creating an Install Server With DVD Media
How to Create an Install Server With SPARC or x86 DVD Media
Creating a Boot Server on a Subnet With a DVD Image
How to Create a Boot Server on a Subnet With a DVD Image
Adding Systems to Be Installed From the Network With a DVD Image
How to Add Systems to Be Installed From the Network With add_install_client (DVD)
Installing the System From the Network With a DVD Image
SPARC: How to Install the Client Over the Network (DVD)
x86: How to Install the Client Over the Network With GRUB (DVD)
6. Installing From the Network With CD Media (Tasks)
7. Patching the Miniroot Image (Tasks)
8. Installing Over the Network (Examples)
9. Installing From the Network (Command Reference)
Part III Installing Over a Wide Area Network
11. Preparing to Install With WAN Boot (Planning)
12. Installing With WAN Boot (Tasks)
13. SPARC: Installing With WAN Boot (Tasks)
14. SPARC: Installing With WAN Boot (Examples)
After you add the system as an installation client, you can install the client from the network. This section describes the following tasks:
SPARC: How to Install the Client Over the Network (DVD) — instructions about how to boot and install SPARC based systems over the network.
x86: How to Install the Client Over the Network With GRUB (DVD) — instructions about how to boot and install x86 based systems over the network.
Before You Begin
This procedure assumes that you have completed the following tasks.
Set up an install server. For instructions about how to create an install server from DVD media, see How to Create an Install Server With SPARC or x86 DVD Media.
Set up a boot server or a DHCP server, if necessary. If the system you want to install is on a different subnet than the installation server, you must set up a boot server, or use a DHCP server. For instructions about how to set up a boot server, see Creating a Boot Server on a Subnet With a DVD Image. For instructions about how to set up a DHCP server to support network installations, see Preconfiguring System Configuration Information With the DHCP Service (Tasks).
Gathered or preconfigured the information you need to install. You can perform this task in one or more of the following ways:
Gather the information in Checklist for Installation in Oracle Solaris 10 1/13 Installation Guide: Planning for Installation and Upgrade.
Note - If you have a system that contains non-global zones, Live Upgrade, a feature of Oracle Solaris, is the recommended upgrade program or program to add patches. Other upgrade programs might require extensive upgrade time because the time required to complete the upgrade increases linearly with the number of installed non-global zones.
For information about upgrading with Live Upgrade, see Part I, Upgrading With Live Upgrade, in Oracle Solaris 10 1/13 Installation Guide: Live Upgrade and Upgrade Planning.
Create a sysidcfg file if you use a sysidcfg file to preconfigure system information. For information about how to create a sysidcfg file, see Preconfiguring With the sysidcfg File.
Set up a name server if you use a naming service to preconfigure system information. For information about how to preconfigure information with a naming service, see Preconfiguring With the Naming Service.
Create a profile in the JumpStart directory on the profile server if you are using the JumpStart installation method. For information about how to set up a JumpStart installation, see Chapter 3, Preparing JumpStart Installations (Tasks), in Oracle Solaris 10 1/13 Installation Guide: JumpStart Installations.
If the system is currently running, bring the system to run level 0.
The ok prompt is displayed.
ok boot net
ok boot net - text
ok boot net - nowin
The system boots from the network.
Use the Checklist for Installation in Oracle Solaris 10 1/13 Installation Guide: Planning for Installation and Upgrade to help you answer the configuration questions.
Note - If the keyboard is self-identifying, the keyboard layout automatically configures during installation. If the keyboard is not self-identifying, you can select from a list of supported keyboard layouts during installation.
PS/2 keyboards are not self-identifying. You will be asked to select the keyboard layout during the installation.
For further information, see keyboard Keyword.
If you are using the GUI, after you confirm the system configuration information, the Welcome to Oracle Solaris panel appears.
Use the Checklist for Installation in Oracle Solaris 10 1/13 Installation Guide: Planning for Installation and Upgrade to help you answer the installation questions.
See Also
For information about how to complete an interactive installation with the Oracle Solaris installation GUI, see To Install or Upgrade With the Oracle Solaris Installation Program With GRUB in Oracle Solaris 10 1/13 Installation Guide: Basic Installations.
The Oracle Solaris installation programs for x86 based systems use the GRUB boot loader. This procedure describes how to install an x86 based system over the network with the GRUB boot loader. For overview information about the GRUB boot loader, see Chapter 6, SPARC and x86 Based Booting (Overview and Planning), in Oracle Solaris 10 1/13 Installation Guide: Planning for Installation and Upgrade.
To install the system over the network, you must instruct the client system to boot over the network. Enable network boot on the client system by using the BIOS setup program in the system BIOS, the network adapter BIOS, or both. On some systems, you must also adjust the boot device priority list so that network boot is attempted before booting from other devices. See the manufacturer's documentation for each setup program, or watch for setup program instructions during boot.
Before You Begin
This procedure assumes that you have completed the following tasks:
Set up an install server. For instructions about how to create an install server from DVD media, see How to Create an Install Server With SPARC or x86 DVD Media.
Set up a boot server or a DHCP server, if necessary. If the system you want to install is on a different subnet than the installation server, you must set up a boot server, or use a DHCP server. For instructions about how to set up a boot server, see Creating a Boot Server on a Subnet With a DVD Image. For instructions about how to set up a DHCP server to support network installations, see Preconfiguring System Configuration Information With the DHCP Service (Tasks).
Gathered or preconfigured the information you need to install. You can perform this task in one or more of the following ways:
Gather the information in Checklist for Installation in Oracle Solaris 10 1/13 Installation Guide: Planning for Installation and Upgrade.
Note - If you have a system that contains non-global zones, Live Upgrade is the recommended upgrade program or program to add patches. Other upgrade programs might require extensive upgrade time because the time required to complete the upgrade increases linearly with the number of installed non-global zones.
For information about upgrading with Live Upgrade, see Part I, Upgrading With Live Upgrade, in Oracle Solaris 10 1/13 Installation Guide: Live Upgrade and Upgrade Planning.
Create a sysidcfg file if you use a sysidcfg file to preconfigure system information. For information about how to create a sysidcfg file, see Preconfiguring With the sysidcfg File.
Set up a name server if you use a naming service to preconfigure system information. For information about how to preconfigure information with a naming service, see Preconfiguring With the Naming Service.
Create a profile in the JumpStart directory on the profile server if you are using the JumpStart installation method. For information about how to set up a JumpStart installation, see Chapter 3, Preparing JumpStart Installations (Tasks), in Oracle Solaris 10 1/13 Installation Guide: JumpStart Installations.
This procedure also assumes that your system can boot from the network.
Some PXE-capable network adapters have a feature that enables a PXE boot if you type a particular keystroke in response to a brief boot-time prompt.
See your hardware documentation for information about how to set the boot priority in the BIOS.
The system boots from the network. The GRUB menu is displayed.
Note - The GRUB menu that is displayed on your system might vary from the following sample, depending on the configuration of your network installation server.
GNU GRUB version 0.95 (631K lower / 2095488K upper memory) +-----------------------------------------------------------------------------------------------------------+ | Solaris Oracle Solaris 10 1/13 /cdrom0 | | | | +-----------------------------------------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, 'e' to edit the commands before booting, or 'c' for a command-line.
Select this entry if you want to install from the network installation server you set up in How to Create an Install Server With SPARC or x86 DVD Media.
You might need to set specific boot arguments if you want to modify the device configuration during the installation, and did not set these boot arguments previously with the add_install_client command as described in How to Add Systems to Be Installed From the Network With add_install_client (DVD).
Boot commands that are similar to the following text are displayed in the GRUB menu.
kernel /I86pc.Solaris_10/multiboot kernel/unix \ -B install_media=192.168.2.1:/export/cdrom0/boot \ module /platform/i86pc/boot_archive
The boot command that you want to edit is displayed in the GRUB edit window.
The command syntax for the GRUB edit menu is as follows.
grub edit>kernel /image-directory/multiboot kernel/unix/ \ install [url|ask] -B options install_media=media-type
For information about boot arguments and command syntax, see Table 9-1.
Note - To cancel your edits and return to the GRUB menu, press Escape.
The GRUB menu is displayed. The edits you made to the boot command are displayed.
The Oracle Solaris installation program checks the default boot disk for the requirements to install or upgrade the system. If the Oracle Solaris installation cannot detect the system configuration, the program prompts you for any missing information.
When the check is completed, the installation selection screen is displayed.
Select the type of installation you want to perform: 1 Solaris Interactive 2 Custom JumpStart 3 Solaris Interactive Text (Desktop session) 4 Solaris Interactive Text (Console session) 5 Apply driver updates 6 Single user shell Enter the number of your choice followed by the <ENTER> key. Alternatively, enter custom boot arguments directly. If you wait 30 seconds without typing anything, an interactive installation will be started.
You might need to update drivers or install an ITU to enable the Oracle Solaris OS to run on your system. Follow the instructions for your driver update or ITU to install the update.
You might want to launch a single user shell if you need to perform any system administration tasks on your system before you install. For information about system administration tasks you can perform prior to installation, see Oracle Solaris Administration: Basic Administration.
After you perform these system administration tasks, the list of installation options is displayed.
Select this installation type to override the default GUI installer and run the text installer.
Select this installation type to override the default GUI installer and run the text installer.
For more information about unattended JumpStart installations (option 2), see Oracle Solaris 10 1/13 Installation Guide: JumpStart Installations.
For detailed information about the Oracle Solaris installation GUI and text installer, see System Requirements and Recommendations in Oracle Solaris 10 1/13 Installation Guide: Planning for Installation and Upgrade.
The system configures the devices and interfaces, and searches for configuration files. The installation program begins.
Use the Checklist for Installation in Oracle Solaris 10 1/13 Installation Guide: Planning for Installation and Upgrade to help you answer the configuration questions.
Note - If the keyboard is self-identifying, the keyboard layout automatically configures during installation. If the keyboard is not self-identifying, you can select from a list of supported keyboard layouts during installation.
For further information, see keyboard Keyword.
During installation, you can choose the default NFSv4 domain name or you can specify a custom NFSv4 domain name. For further information, see nfs4_domain Keyword.
If you are using the installation GUI, after you confirm the system configuration information, the Welcome to Oracle Solaris panel appears.
Use the Checklist for Installation in Oracle Solaris 10 1/13 Installation Guide: Planning for Installation and Upgrade to help you answer the installation questions.
Note - When you boot the system after the installation, a GRUB menu lists the operating systems that are installed, including the newly-installed Oracle Solaris OS. Select the operating system you want to boot. The default selection loads if you do not make another selection.
Next Steps
If you install multiple operating systems on your machine, you need to instruct the GRUB boot loader to recognize these operating systems in order to boot. For more information, see Modifying Boot Behavior on x86 Based Systems in Oracle Solaris Administration: Basic Administration.
See Also
For information about how to complete an interactive installation with the Oracle Solaris installation GUI, see To Install or Upgrade With the Oracle Solaris Installation Program With GRUB in Oracle Solaris 10 1/13 Installation Guide: Basic Installations.