| Skip Navigation Links | |
| Exit Print View | |
|
Oracle Solaris 10 1/13 Installation Guide: JumpStart Installations Oracle Solaris 10 1/13 Information Library |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Oracle Solaris 10 1/13 Installation Guide: JumpStart Installations Oracle Solaris 10 1/13 Information Library |
1. Where to Find Oracle Solaris Installation Planning Information
3. Preparing JumpStart Installations (Tasks)
4. Using Optional JumpStart Features (Tasks)
5. Creating Custom Rule and Probe Keywords (Tasks)
SPARC: Setting Up a System for a JumpStart Installation (Task Map)
SPARC: Performing a JumpStart Installation
To Prepare to Install a Flash Archive With a JumpStart Installation
SPARC: To Perform an Installation or Upgrade With the JumpStart Program
SPARC: Command Reference for the boot Command
x86: Setting Up a System for a JumpStart Installation (Task Map)
x86: Performing a JumpStart Installation
x86: How to Perform an Installation or Upgrade With the JumpStart Program and GRUB
x86: Command Reference for Booting the System
7. Installing With JumpStart (Examples)
8. JumpStart Keyword Reference
This chapter describes how to perform a JumpStart installation on a SPARC based or an x86 based system. You need to follow these procedures on the system on which you intend to install the Oracle Solaris software.
Note - If you are installing an Oracle Solaris ZFS root pool, see Chapter 9, Installing a ZFS Root Pool With JumpStart for limitations and profile examples.
Note - If you are installing or upgrading the Oracle Solaris 10 OS on an iSCSI target system, see the following sections for iSCSi keywords and examples.
For detailed instructions about configuring iSCSI parameters, see Chapter 4, Installing the Oracle Solaris 10 OS on an iSCSI Target Disk, in Oracle Solaris 10 1/13 Installation Guide: Basic Installations.
This chapter covers the following topics:
|