| Skip Navigation Links | |
| Exit Print View | |
|
Oracle Solaris SAN Configuration and Multipathing Guide Oracle Solaris 10 1/13 Information Library |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Oracle Solaris SAN Configuration and Multipathing Guide Oracle Solaris 10 1/13 Information Library |
1. Solaris I/0 Multipathing Overview
Overview of Solaris I/O Multipathing
Fibre Channel Software Features
Solaris I/O Multipathing Features
FC Device Configuration Overview
Configuring FC Devices With Multipathing Considerations
2. Configuring Solaris I/O Multipathing Features
3. Configuring Fabric-Connected Devices
4. Configuring Oracle Solaris iSCSI Initiators
6. Configuring IPFC SAN Devices
7. Booting the Oracle Solaris OS From Fibre Channel Devices on x86 Based Systems
8. Persistent Binding for Tape Devices
A. Manual Configuration for Fabric-Connected Devices
Solaris I/O multipathing features is based on open standards for communicating with devices and device management, ensuring interoperability with other standards-based devices and software. The following standards are supported by Solaris I/O multipathing features:
ANSI Standard: Information Technology – SNIA Multipath Management API Specification (ANSI INCITS 412-2006)
T10 standards, including SCSI-3, SAM, FCP, SPC, and SBC
T11.3 FC standards, including FC-PH, FC-AL, FC-LS, and FC-GS
T11.5 storage management standards, including FC-HBA
IETF standards, including RFC 2625
Serial Attached SCSI-2 (SAS2)
|