|Skip Navigation Links|
|Exit Print View|
|Oracle Solaris SAN Configuration and Multipathing Guide Oracle Solaris 10 1/13 Information Library|
# cfgadm -al -o show_SCSI_LUN
If you issue the cfgadm -al -o show_SCSI_LUN controller-ID command immediately after a system boots, the output might not show the Fibre Channel Protocol (FCP) SCSI LUN level information. The information does not appear because the storage device drivers, such as the ssd and st driver, are not loaded yet on the running system.
# modinfo | grep ssd