- enable and configure SMF instance of Kernel SSL
ksslcfg create -f pkcs11 -T token_label -C certificate_label [-d softtoken_directory] -p password_file [-u username] [-h ca_certchain_file] [-c ciphersuites] [-t ssl_session_cache_timeout] [-z ssl_session_cache_size] [-v] -x proxy_port [host] ssl_port
ksslcfg create -f pkcs12 -i cert_and_key_pk12file -p password_file [-u username] [-c ciphersuites] [-t ssl_session_cache_timeout] [-z ssl_session_cache_size] [-v] -x proxy_port [host] ssl_port
ksslcfg create -f pem -i cert_and_key_pemfile -p password_file [-u username] [-c ciphersuites] [-t ssl_session_cache_timeout] [-z ssl_session_cache_size] [-v] -x proxy_port [host] ssl_port
ksslcfg delete [-v] [host] ssl_port
ksslcfg manages smf(5) instances for the Kernel SSL proxy module. An SSL-enabled web server can use the services of its Kernel SSL proxy to improve the performance of the HTTPS packets processing. It does so by creating an instance of the Kernel SSL service, specifying the SSL proxy port and parameters, and by listening on the proxy port.
The create subcommand creates an instance and enables the service for the given address and SSL port.
The delete subcommand disables the service for the given address and port, if it is enabled, and deletes the instance from the SMF repository.
After ksslcfg successfully configures the service in the kernel, the proxy application must be started, or restarted if it is already running.
You must run ksslcfg to configure your Kernel SSL proxy before you start your application.
ksslcfg allows you to specify an ssl_port operand, described under OPERANDS, and, with the -x option, a proxy_port value. When specified for use with the Kernel SSL proxy, these values cannot also be configured for the Solaris Network Cache and Acceleration (NCA) feature.
The Fault Managed Resource Identifier (FMRI) for the kernel SSL proxy instances is svc://network/ssl/proxy. ksslcfg creates an instance of that service unique to the combination of host and SSL port. Instance FMRIs for particular proxy entries can be found with svcs(1) and used for dependencies of other services. The state of the service instance tracks in-kernel configuration only. It does not reflect the presence or state of the application listening on the proxy port.
The following options are supported:
Set of ciphers a client is allowed to negotiate in a sorted order. The supported SSL version3 and TLS ciphers are listed below. Note that the names are case-insensitive.
rsa_rc4_128_sha rsa_rc4_128_md5 rsa_aes_256_cbc_sha rsa_aes_128_cbc_sha rsa_3des_ede_cbc_sha rsa_des_cbc_sha
Uses the certificate/key format specified in key_format. The supported options are pkcs11, pkcs12, and pem.
When pkcs12 or pem is specified with the -f option, reads a key and a certificate of the web server from key_and_certificate_file. This file can also contain any intermediate CA certificates that form the certificate chain to the root CA for the server certificate. These certificates must follow the server certificate in the file and the order must be bottom up: lowest level CA certificate followed by the next higher level CA certificate, and so on.
PKCS#11 can store multiple certificates in single token. This option enables you to specify a single certificate, identified by certificate_label. This label must match the CKA_LABEL on the certificate object in the token specified by -T. This option is to be used only with -f pkcs11.
This option is applicable only with the pkcs11 key format, when the token label is the Sun Software PKCS#11 softtoken. Use this option to override the default location of the PKCS#11 softtoken directory ($HOME/.sunw). See pkcs11_softtoken(5).
When pkcs11 is specified with the -f option, reads a set of intermediate CA certificates that form the certificate chain to the root CA for the server certificate (specified with the -C option), from ca_certchain_file. The file must be in PEM format.
Obtains the password used to encrypt the private key from password_file. When using the pkcs11 option (see -f, above), the password is used to authenticate the user to the PKCS #11 token.
The timeout value, in seconds, for an SSL session. It corresponds to SSL3SessionTimeout of the Sun ONE web server configuration or SSLSessionCacheTimeout of mod_ssl.
When pkcs11 is specified with -f, uses the PKCS#11 token specified in token_label. Use cryptoadm list -v to display all PKCS#11 tokens available.
The username of the user who owns the password file. If omitted, the system will try to read the password file as root.
Displays the version.
The SSL proxy port. The port number is designated exclusively for clear-text HTTP communication between the web server and the kernel SSL proxy module. No external HTTP packets are delivered to this port.
The maximum number of SSL sessions that can be cached. It corresponds to SSLCacheEntries of the Sun ONE web server configuration. When this option is not specified, the default is 5000 entries.
Displays the usage of the command.
The address and the port of the web server for which the kernel SSL entry is created. If host is omitted, the entry will be used for all requests that arrived at the ssl_port, regardless of the destination address. Both a host name and an IP address are acceptable forms for host. ssl_port is required. Typically, this has a value of 443.
示例 1 Create and Enable a Kernel SSL Instance
The following command creates and enables a Kernel SSL instance using a certificate and a key in PKCS#11 format.
# ksslcfg create -f pkcs11 -T "Sun Software PKCS#11 softtoken" \ -C "Server-Cert" -p /some/directory/password -u webservd \ -x 8080 www.mysite.com 443 % svcs svc:/network/ssl/proxy STATE STIME FMRI online Sep_27 svc:/network/ssl/proxy:kssl-www-mysite-com-443
示例 2 Create and Enable a Default Instance for All Addresses
The following command creates and enables a default instance for all addresses from a certificate and key in a pkcs#12 file.
# ksslcfg create -x 8888 -f pkcs12 -i /some/directory/keypair.p12 \ -p /some/directory/password -u webservd 443
示例 3 Create and Enable an Instance with Specific Cipher Suites
The following command creates and enables an instance with specific cipher suites.
# ksslcfg create -x 8080 -f pem \ -i /some/directory/keypair.pem -p /some/directory/password \ -c "rsa_rc4_128_md5,rsa_rc4_128_sha" \ 220.127.116.11 443
示例 4 Disable and Delete an Instance
The following command disables and deletes an instance.
# ksslcfg delete www.mysite.com 443
示例 5 Establishing Dependency of Proxy Application
The sequence of commands shown below establishes a dependency of a proxy application on a KSSL instance. Note that he proxy application should only be started after the SSL kernel proxy instance has been started.
The following commands establish the dependency of an Apache 2.2 web server. KSSL has been configured to listen on SSL port 443 and a wildcard address.
# svccfg -s svc:/network/http:apache22 svc:/network/http:apache22> addpg kssl dependency svc:/network/http:apache22> setprop kssl/entities = fmri:svc:/network/\ ssl/proxy:kssl-INADDR_ANY-443 svc:/network/http:apache22> setprop kssl/grouping = astring: require_all svc:/network/http:apache22> setprop kssl/restart_on = astring: refresh svc:/network/http:apache22> setprop kssl/type = astring: service svc:/network/http:apache22> end
Following these commands, enable the web server:
# svcadm enable svc:/network/http:apache22
If the web server was already running, restart it:
# svcadm refresh svc:/network/http:apache22 # svcadm restart svc:/network/http:apache22
An error occurred.
See attributes(5) for descriptions of the following attributes:
Command line options and the utility name are Committed. The command output, the FMRI service name (svc://network/ssl/proxy), and the FMRI instance's name format are Uncommitted
Chown, P., Advanced Encryption Standard (AES) Ciphersuites for Transport Layer Security (TLS), RFC 3268, June 2002.
ksslcfg create without an host argument creates an INADDR_ANY smf instance. ksslcfg delete without an host argument deletes only the INADDR_ANY instance. ksslcfg delete needs a host argument to delete any non-INADDR_ANY instance.
On a system with zones(5) installed, the ksslcfg command can be used only in the global zone at this time.