Oracle Hardware Management Pack 설치 설명서 개요
Oracle Hardware Management Pack 소개
Oracle Hardware Management Pack 설치 프로그램을 사용하여 구성 요소 설치
My Oracle Support를 사용하여 펌웨어 및 소프트웨어 다운로드
Solaris 시스템에서 설치 프로그램 실행 시 오류가 보고됨(CR 6982393)
SUNWCreq 클러스터가 있는 Solaris에서 설치 프로그램 실행 시 실패(CR 6982718)
올바른 ICH10 슬롯 정보를 위해 Sun Fire X4170 M2에 도구 및 드라이버를 설치해야 함(CR 6992155)
SUNWipmi가 설치되어 있는 Oracle Solaris OS 서버에서 설치를 완료할 수 없음(CR 7070692)
Oracle Linux 6에서 GUI 모드로 설치 프로그램을 실행할 수 없음(CR 7129501)
Linux에 QLogic 지원을 설치하는 데 시간이 오래 걸림(CR 7115215)
Hardware Management Pack 구성 요소 설치
GUI 모드를 사용하여 Hardware Management 구성 요소를 설치하는 방법
GUI 모드를 사용하여 Hardware Management 구성 요소를 제거하는 방법
콘솔 모드를 사용하여 Hardware Management Pack 구성 요소를 제거하는 방법
자동 모드를 사용하여 Hardware Management Pack 구성 요소를 설치하는 방법
시작하기 전에
Oracle Hardware Management Pack 설치 프로그램으로 Management Pack 구성 요소를 설치하려면 관리자 권한으로 시스템에 로그인해야 합니다.
Hardware Management Pack을 다운로드하여 추출합니다. Getting the Software를 참조하십시오.
이 절차에서는 파일 추출 디렉토리를 extract-directory라고 합니다.
Windows Server 2003 SP2 또는 이전 버전의 경우 먼저 Sun IPMI System Management Driver를 설치해야 합니다. Installing the Sun IPMI System Management Driver 2.1를 참조하십시오.
Hardware Management Pack 패키지에는 설치 성공을 위해 충족되어야 할 종속성이 있습니다. 자세한 내용은 Software Dependencies을 참조하십시오.
Oracle Solaris 운영 체제에서는 pkgadd(1M)의 제한 사항으로 인해 Hardware Management Pack 추출 경로에 공백이 없어야 설치 프로세스를 계속할 수 있습니다.
Windows Server 운영 체제를 실행하는 서버에서 호스트-ILOM 상호 연결을 설치할 때는 보안 인증서를 가져와야 합니다. 자세한 내용은 How to Import the Security Certificate on a Windows Server을 참조하십시오.
여기서 arch는 프로세서에 따라 SPARC 또는 x86입니다.
시스템에서 다음과 유사한 출력을 표시합니다.
Preparing to install... Extracting the installation resources from the installer archive... Configuring the installer for this system's environment... Launching installer... Preparing CONSOLE Mode Installation... =============================================================================== Oracle Hardware Management Pack (created with InstallAnywhere) ------------------------------------------------------------------------------- =============================================================================== Introduction ------------ InstallAnywhere will guide you through the installation of Oracle Hardware Management Pack. It is strongly recommended that you quit all programs before continuing with this installation. Respond to each prompt to proceed to the next step in the installation. If you want to change something on a previous step, type 'back'. You may cancel this installation at any time by typing 'quit'.
ENTER A COMMA_SEPARATED LIST OF NUMBERS REPRESENTING THE FEATURES YOU WOULD LIKE TO SELECT, OR DESELECT. TO VIEW A FEATURE'S DESCRIPTION, ENTER '?<NUMBER>'. PRESS RETURN WHEN YOU ARE DONE: 1- [X] Hardware Management Agents 2- [X] CLI Tools 3- [ ] IPMITool 4- [ ] Emulex Fibre Channel support 5- [ ] QLogic Fibre Channel support Please choose the Features to be installed by this installer.:
옵션 1과 2는 미리 선택되어 있습니다. 선택된 옵션을 토글하려면 쉼표로 구분된 숫자 목록을 입력합니다.
예를 들어, 위와 같이 기본 선택이 제공되는 경우 1, 3을 입력하면 Hardware Management Agent의 선택이 해제되고 IPMITool이 선택됩니다.
시스템에서 다음을 표시합니다.
=============================================================================== Dependency requirement for feature selection. ---------------------------------------------- Before installing hmp packages, please resolve these requirements: Emulex Fibre Channel support requires package(s): elxocmcore libhbaapi-devel QLogic Fibre Channel support requires package(s): libhbaapi-devel 1- Exit and resolve the dependencies. 2- Continue and de-select unresolved packages.
옵션 중 하나를 선택하고 Enter 키를 누릅니다.
Configure Hardware Management Agent ----------------------------------- Start the Hardware Management Agent? This agent's short name is hwmgmtd. ->1- Yes 2- No
원하는 번호를 입력하거나 Enter 키를 눌러 Yes(예)를 선택합니다.
다음 화면이 열립니다.
Configure SNMP Agent -------------------- Start the SNMP agent? This agent's short name is snmpd on Linux, sma on Solaris, and SNMP on Windows. ->1- Yes 2- No
원하는 번호를 입력하거나 Enter 키를 눌러 Yes(예)를 선택합니다.
================================================================ Configure ILOM Trap Proxy -------------------------- The ILOM trap proxy enables you to forward traps generated by an Oracle ILOM service processor to a network destination without having to connect the service processor to the destination network. When enabling the SNMP trap proxy, you must configure the IP, port and SNMP community that your destination is listening on. Do you want to enable ILOM Trap Proxy? 1- Yes ->2- No
결함 트랩 프록시를 사용으로 설정하려면 1을 입력합니다. 시스템에서 SNMP 결함 트랩 프록시를 구성하거나 기본값을 그대로 적용할 수 있는 옵션을 제공합니다.
Destination IP (DEFAULT: 127.0.0.1): Destination Port (DEFAULT: 162): Destination Community (DEFAULT: public):
Configure Host-to-ILOM Interconnect ----------------------------------- Configure the Host-to-ILOM Interconnect between the host and ILOM. This is a high-speed connection that allows fast communication with ILOM using an internal IP address. 1- Configure automatically ->2- Configure manually
원하는 번호를 입력하거나 Enter 키를 눌러 Configure automatically(자동으로 구성)를 선택합니다.
1 또는 3을 선택할 경우 단계 11로 이동합니다. 2–Configure manually(수동으로 구성)를 선택할 경우 시스템에서 다음을 표시합니다.
Configure Host-to-ILOM Interconnect Manually -------------------------------------------- Specify the following parameters. IP Address: (DEFAULT: 169.254.182.76): Netmask: (DEFAULT: 255.255.255.0): Host IP Address: (DEFAULT: 169.254.182.77):
Pre-Installation Summary(사전 설치 요약)가 열립니다.
다음 화면이 열립니다.
Ready To Install ---------------- InstallAnywhere is now ready to install Oracle Hardware Management Pack onto your system at the following location:
설치는 2분 정도 걸립니다.
참조