Skip navigation links

com.bea.wlevs.monitor.management
Interface MonitorRuntimeMBean

public interface MonitorRuntimeMBean

extends WebLogicMBean

Interface to use for monitoring latency between different points or throughput at a point in an event processing network. The object name of the MonitorRuntimeMBean is as follows:

  ServerRuntime=<server name>,Name=MonitorRuntime,Type=MonitorRuntime
 

All the monitoring methods take ObjectName representing the end point that is to be monitored. The ObjectName must have the correct domain name and the application name and stage name must be specified.

• Use com.bea.wlevs.management.ManagementConstants.DOMAIN_NAME for domain name
• Use com.bea.wlevs.management.configuration.ApplicationMBean.MBEAN_TYPE for application name property
• Use com.bea.wlevs.management.ManagementConstants.NAME_PROPERTY for stage name
• Use com.bea.wlevs.management.ManagementConstants.DIRECTION_PROPERTY to specify whether it is INBOUND or OUTBOUND. If this property is not specified, default values will be used as described in the methods' documentation.

  Field Summary

  static int	DEFAULT_INTERVAL Default interval in milliseconds when not specified in monitor operations.
  static int	DEFAULT_THROUGHPUT Default throughput interval in milliseconds when not specified in monitor operations.
  static java.lang.String	MBEAN_TYPE This MBean is registered using the following MBEAN_TYPE.

  Method Summary
  javax.management.ObjectName	monitorAvgLatency(javax.management.ObjectName startLocation, javax.management.ObjectName endLocation) Sets up to compute the average latency for events to pass between the specified start and end points.
  javax.management.ObjectName	monitorAvgLatency(javax.management.ObjectName startLocation, javax.management.ObjectName endLocation, long interval) Sets up to compute the average latency for events to pass between the specified start and end points.
  javax.management.ObjectName	monitorAvgLatencyThreshold(javax.management.ObjectName startLocation, javax.management.ObjectName endLocation, long threshold) Sets up to calculate the average latency values greater than the specified threshold value for specified start and end points.
  javax.management.ObjectName	monitorAvgLatencyThreshold(javax.management.ObjectName startPoint, javax.management.ObjectName endPoint, long interval, long threshold) Sets up to calculate the average latency values greater than the specified threshold value for specified start and end points.
  javax.management.ObjectName	monitorAvgThroughput(javax.management.ObjectName location) Sets up to compute the average throughput of events at a given location.
  javax.management.ObjectName	monitorAvgThroughput(javax.management.ObjectName location, long throughputInterval, long averageInterval) Sets up to compute the average throughput of events at a given location.
  javax.management.ObjectName	monitorMaxLatency(javax.management.ObjectName startLocation, javax.management.ObjectName endLocation) Sets up to compute the maximum latency for events to pass between the specified start and end points.
  javax.management.ObjectName	monitorMaxLatency(javax.management.ObjectName startLocation, javax.management.ObjectName endLocation, long interval) Sets up to compute the maximum latency for events to pass between the specified start and end points.

  Methods inherited from interface com.bea.wlevs.management.WebLogicMBean

  getName, getObjectName, getType

  Field Detail

  DEFAULT_INTERVAL

  public static final int DEFAULT_INTERVAL
  

  Default interval in milliseconds when not specified in monitor operations.

  DEFAULT_THROUGHPUT

  public static final int DEFAULT_THROUGHPUT
  

  Default throughput interval in milliseconds when not specified in monitor operations.

  MBEAN_TYPE

  public static final java.lang.String MBEAN_TYPE
  

  This MBean is registered using the following MBEAN_TYPE.

  Method Detail

  monitorAvgLatency

  public javax.management.ObjectName monitorAvgLatency(javax.management.ObjectName startLocation,
                                                       javax.management.ObjectName endLocation)
                                                throws javax.management.JMException
  

  Sets up to compute the average latency for events to pass between the specified start and end points. This is the same as monitorAvgLatency(ObjectName, ObjectName, long, String) for DEFAULT_INTERVAL.

  Parameters:

  startPoint - ObjectName representing the start point that is to be monitored. This includes the application name and stage name. It may also specify whether it is the entry or exit point at the stage. If it is not specified, it defaults to entry point.

  endPoint - ObjectName representing the end point that is to be monitored. This includes the application name and stage name. It may also specify whether it is the entry or exit point at the stage. If it is not specified, it defaults to exit point.

  Returns:

  ObjectName of ProbeRuntimeMBean instance through which latency values in microseconds can be obtained

  Throws:

  javax.management.JMException - if any error occurs trying to set up monitoring for the end points

  monitorAvgLatency

  public javax.management.ObjectName monitorAvgLatency(javax.management.ObjectName startLocation,
                                                       javax.management.ObjectName endLocation,
                                                       long interval)
                                                throws javax.management.JMException
  

  Sets up to compute the average latency for events to pass between the specified start and end points.

  Latency is defined as the time it takes for an event to flow from the start point to the end point. The average latency is calculated by calculating the average for all latency values in the specified time interval. This creates a ProbeRuntimeMBean through which the latency values can be obtained.

  Parameters:

  startPoint - ObjectName representing the start point that is to be monitored. This includes the application name and stage name. It may also specify whether it is the entry or exit point at the stage. If it is not specified, it defaults to entry point.

  endPoint - ObjectName representing the end point that is to be monitored. This includes the application name and stage name. It may also specify whether it is the entry or exit point at the stage. If it is not specified, it defaults to exit point.

  interval - the time interval, in milliseconds, for average latency calculation. The avarage value is calculated by taking the average of the all the values within the time interval.

  Returns:

  ObjectName of ProbeRuntimeMBean instance through which latency values in microseconds can be obtained

  Throws:

  javax.management.JMException - if any error occurs trying to set up monitoring for the end points

  monitorAvgLatencyThreshold

  public javax.management.ObjectName monitorAvgLatencyThreshold(javax.management.ObjectName startLocation,
                                                                javax.management.ObjectName endLocation,
                                                                long threshold)
                                                         throws javax.management.JMException
  

  Sets up to calculate the average latency values greater than the specified threshold value for specified start and end points.

  This is the same as monitorAvgLatencyThreshold(ObjectName, ObjectName, interval, threshold, unit) for DEFAULT_INTERVAL.

  Parameters:

  startPoint - ObjectName representing the start point that is to be monitored. This includes the application name and stage name. It may also specify whether it is the entry or exit point at the stage. If it is not specified, it defaults to entry point.

  endPoint - ObjectName representing the end point that is to be monitored. This includes the application name and stage name. It may also specify whether it is the entry or exit point at the stage. If it is not specified, it defaults to exit point.

  threshold - latency values greater than this threshold value, in microseconds, will be reported.

  Returns:

  ObjectName of ProbeRuntimeMBean instance through which latency values in microseconds can be obtained

  Throws:

  javax.management.JMException - if any error occurs trying to set up monitoring for the end points

  monitorAvgLatencyThreshold

  public javax.management.ObjectName monitorAvgLatencyThreshold(javax.management.ObjectName startPoint,
                                                                javax.management.ObjectName endPoint,
                                                                long interval,
                                                                long threshold)
                                                         throws javax.management.JMException
  

  Sets up to calculate the average latency values greater than the specified threshold value for specified start and end points. This creates a ProbeRuntimeMBean through which the latency values can be obtained.

  Parameters:

  startPoint - ObjectName representing the start point that is to be monitored. This includes the application name and stage name. It may also specify whether it is the entry or exit point at the stage. If it is not specified, it defaults to entry point.

  endPoint - ObjectName representing the end point that is to be monitored. This includes the application name and stage name. It may also specify whether it is the entry or exit point at the stage. If it is not specified, it defaults to exit point.

  interval - the time interval, in milliseconds, for average latency calculation. The avarage value is calculated by taking the average of the all the values within the time interval.

  threshold - latency values greater than this threshold value, in microseconds, will be reported.

  Returns:

  ObjectName of ProbeRuntimeMBean instance through which latency values in microseconds can be obtained

  Throws:

  javax.management.JMException - if any error occurs trying to set up monitoring for the end points

  monitorMaxLatency

  public javax.management.ObjectName monitorMaxLatency(javax.management.ObjectName startLocation,
                                                       javax.management.ObjectName endLocation)
                                                throws javax.management.JMException
  

  Sets up to compute the maximum latency for events to pass between the specified start and end points. This is the same as monitorMaxLatency(ObjectName, ObjectName, interval) for DEFAULT_INTERVAL.

  Parameters:

  startPoint - ObjectName representing the start point that is to be monitored. This includes the application name and stage name. It may also specify whether it is the entry or exit point at the stage. If it is not specified, it defaults to entry point.

  endPoint - ObjectName representing the end point that is to be monitored. This includes the application name and stage name. It may also specify whether it is the entry or exit point at the stage. If it is not specified, it defaults to exit point.

  Returns:

  ObjectName of ProbeRuntimeMBean instance through which latency values in microseconds can be obtained

  Throws:

  javax.management.JMException - if any error occurs trying to set up monitoring for the end points

  monitorMaxLatency

  public javax.management.ObjectName monitorMaxLatency(javax.management.ObjectName startLocation,
                                                       javax.management.ObjectName endLocation,
                                                       long interval)
                                                throws javax.management.JMException
  

  Sets up to compute the maximum latency for events to pass between the specified start and end points.

  Latency is defined as the time it takes for an event to flow from the start point to the end point. The maximum across the latency values in the specified time interval will be calculated.

  Parameters:

  startPoint - ObjectName representing the start point that is to be monitored. This includes the application name and stage name. It may also specify whether it is the entry or exit point at the stage. If it is not specified, it defaults to entry point.

  endPoint - ObjectName representing the end point that is to be monitored. This includes the application name and stage name. It may also specify whether it is the entry or exit point at the stage. If it is not specified, it defaults to exit point.

  interval - the time interval, in milliseconds, for maximum latency calculation. The maximum value is the highest value among all the values within the time interval.

  Returns:

  ObjectName of ProbeRuntimeMBean instance through which latency values in microseconds can be obtained

  Throws:

  javax.management.JMException - if any error occurs trying to set up monitoring for the end points

  monitorAvgThroughput

  public javax.management.ObjectName monitorAvgThroughput(javax.management.ObjectName location)
                                                   throws javax.management.JMException
  

  Sets up to compute the average throughput of events at a given location. This is the same as monitorAvgThroughput(ObjectName, long, long) with throughput interval DEFAULT_THROUGHPUT and average interval DEFAULT_INTERVAL.

  Parameters:

  location - ObjectName representing the point that is to be monitored. This includes the application name and stage name. It may also specify whether it is the entry or exit point at the stage. If it is not specified, it defaults to entry point.

  Returns:

  ObjectName of ProbeRuntimeMBean instance through which throughput values can be obtained

  Throws:

  javax.management.JMException - if any error occurs trying to set up monitoring for the end points

  monitorAvgThroughput

  public javax.management.ObjectName monitorAvgThroughput(javax.management.ObjectName location,
                                                          long throughputInterval,
                                                          long averageInterval)
                                                   throws javax.management.JMException
  

  Sets up to compute the average throughput of events at a given location.

  Total throughput for the location is calculated by counting the number of events passing through the location during throughputInterval. Average throughput is the average of these values across averageInterval.

  Parameters:

  location - ObjectName representing the point that is to be monitored. This includes the application name and stage name. It may also specify whether it is the entry or exit point at the stage. If it is not specified, it defaults to entry point.

  throughputInterval - the time interval, in milliseconds, for which the throughput is calculated

  averageInterval - the time interval, in milliseconds, for which the average throughput is calculated

  Returns:

  ObjectName of ProbeRuntimeMBean instance through which throughput values can be obtained

  Throws:

  javax.management.JMException - if any error occurs trying to set up monitoring for the end points