A script enabled browser is required for this page to function properly.
Skip to main content
STA Reference Guide, v1.0.2
E28382-03
Table of Contents Previous Next Index


Exchanges Screen : Exchange Attribute Definitions : Enterprise Specific Information

Enterprise Specific Information

Information specific to the StorageTek enterprise drive involved in the exchange. Appears only if the exchange involved an enterprise drive.

Attribute

Definition

Media MB Capacity

Maximum media capacity, in megabytes.

Note – Reported value varies by drive vendor and other factors.

Media MB Avail Post

Unused media capacity, in megabytes; this value is provided after the exchange completes.

Note – Reported value varies by drive vendor and other factors.

Write Efficiency

Write efficiency for the exchange, based on capacity over distance.

Read Margin

Amount of error correction code (ECC) read margin remaining on the media, as reported by the drive during the last mount. Reported as a percentage. A high value is desirable.

If STA determines that this value has gone below a threshold for this drive type, the Exchange Read Marginal attribute is set to Yes.

Time Spent Loaded

Total time during this exchange that the drive has tension on the media. Does not include the time required to thread the media.

Time Spent Reading

Total time the drive spent reading data during the exchange

Time Spent Writing

Total time the drive spent writing data during the exchange

Time Spent Reading or Writing

Total time the drive spent reading and writing data during the exchange

Read MB/sec

Read rate for the time spent actively reading; idle time is excluded. Expressed in megabytes per second. Calculated as:

compressed MB read / total read time 

Write MB/sec

Write rate for the time spent actively writing; idle time is excluded. Expressed in megabytes per second. Calculated as:

compressed MB written / total write time 

R/W MB/sec

Throughput rate for the time spent actively reading and writing; idle time is excluded. Expressed in megabytes per second. Calculated as:

(compressed MB read + compressed MB written) / 
(read time + write time)

Read Mount Ratio

Ratio of read time to total mount time. Calculated as:

read time / total mount time

Write Mount Ratio

Ratio of write time to total mount time. Calculated as:

write time / total mount time 

R/W Mount Ratio

Ratio of read and write time to total mount time. Displayed as a percentage. A value close to 1.0 indicates the drive is active over the entire mount. Calculated as:

(read time + write time) / total mount time 

Drive Media Maintenance Alert

Media in the drive requires physical maintenance, which must be corrected before the cartridge can be loaded successfully. For example, the leader may be pulled into the cartridge.

Repositioning cycles

Total times the media was repositioned for any reason

Repositioning cycles non ERP

Total times the media was repositioned due to non-ERP (error recovery process) reasons, such as data overrun or underrun.

Media at End of Warranty Alert

Media has reached the end of its warranty period and further use is not covered by warranty.


Table of Contents Previous Next Index Link to documentation
Copyright © 2012 Oracle and/or its affiliates. All rights reserved.