Additional Enterprise Exchange Errors

Information about errors that occurred during the exchange. Appears only if the exchange involved a StorageTek enterprise drive.


Attribute	Definition
Exchange FSC	Four-byte hexadecimal fault symptom code (FSC). For example, FD55, S053, etc. Reported only if an error occurred during the exchange.
Drive Load Limit Alert	Indicates whether the drive exceeded its lifetime limit of media loads at the time of the exchange. Possible values: Yes or No.
Media Load Limit Alert	Indicates whether the media has exceeded the recommended number of drive loads
Perm Read Errors	Number of permanent read errors
Perm Write Errors	Number of permanent write errors
Servo Perm Errors	Number of permanent servo errors
Unload Errors	Number of permanent unload errors
Usage Perm Errors	Number of unknown usage errors
Drive Dump Available	Drive dump is available
Drive Revision Down Level Alert	Drive is down-level for the media loaded
Drive Event Log Near Full	Drive event log is 75 percent or more full. This is an expected state, as the log is circular. If Oracle Service Delivery Platform (SDP) is installed, the logs are cleared.
Drive Load Alert	The media could not be loaded in the drive.
Media Snapped Alert	The media has snapped.
MIR Invalid Alert	The media directory is invalid, resulting in degraded file search performance.
Media RFID Alert	The media RFID was found to be open at load time, indicating the drive was powered off before the media was unloaded on the previous mount. Results in degraded media performance.
Media Permanent Error Alert	A permanent media error occurred while the media was mounted
Media Start of Data NOT Found	Start of customer data could not be found
Drive Meters at High Speed	Total positioning meters of media passed through the drive heads at high speed over the drive's lifetime. Positioning meters occur during locate, rewind, and spacing operations.
Drive Meters of Head Contact	Total meters of media passed through the drive heads over the drive's lifetime