This guide contains information about the Small Computer System Interface (SCSI) command set. It is intended for independent software vendors (ISVs), operating system developers, and engineers responsible for implementing the SCSI over a Fibre Channel (FC) physical interface on Oracle's StorageTek SL150 Tape Library.
Note:
Refer to the tape drive documentation for information about SCSI commands for a specific tape drive.For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc
.
Oracle customers that have purchased support have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info
or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs
if you are hearing impaired.
American National Standard Dictionary for Information Processing Systems - X3/TR-1-82
SCSI–3 Primary Commands (SPC) - X3.301–1997
SCSI–3 Primary Commands (SPC-2) - T10/Project 1236D
SCSI–3 Medium Changer Commands (SMC) - T10/Project 1383D
SCSI–3 Architecture Model (SAM) - X3.270–1996
SCSI Architecture Model – 2 (SAM–2) - T10/Project 1157D
Fibre Channel Physical and Signaling Interface (FC–PH) - X3.230–1994 Revision 4.3, X3.230–1996 (Amendment 1), X3.230–1997 (Amendment 2)
Fibre Channel Physical and Signaling Interface (FC–PH–2) - X3.297–1996 Revision 7.4
Fibre Channel Physical and Signaling Interface (FC–PH–3) - X3.303–199x Revision 9.3
Fibre Channel Arbitrated Loop (FC–AL) - X3.272–1996 Revision 4.5
Fibre Channel Arbitrated Loop (FC–AL–2) - X3.272–199x Revision 7.0
Go to the Tape Storage section of the Oracle Help Center (http://docs.oracle.com/en/storage/#tape
) for additional SL150 documentation.