跳過導航連結
Oracle Solaris 10 1/13 安裝指南:Live Upgrade 與升級規劃
Oracle Solaris 10 1/13 Information Library (繁體中文)
搜尋範圍:
此文件
整個文件庫
Oracle Solaris 10 1/13 安裝指南:Live Upgrade 與升級規劃
2013 年 1 月
本書提供關於如何使用 Live Upgrade 建立及升級新啟動環境的說明。
文件資訊
前言
第 1 部分使用 Live Upgrade 升級
1. Oracle Solaris 安裝規劃資訊的位置
規劃和系統需求資訊的位置
2. Live Upgrade (簡介)
Live Upgrade 簡介
Live Upgrade 程序
建立啟動環境
檔案系統類型
在檔案系統上建立 RAID-1 磁碟區
複製檔案系統
建立新啟動環境的範例
建立具有 RAID-1 磁碟區檔案系統的啟動環境
使用 Live Upgrade 管理磁碟區
將 Solaris Volume Manager 作業對映到 Live Upgrade
使用 Live Upgrade 建立 RAID-1 磁碟區的範例
在兩個實體磁碟上建立 RAID-1 磁碟區
建立啟動環境並使用現有子鏡像
升級啟動環境
Live Upgrade 自動註冊的影響
什麼是自動註冊?
自動註冊如何影響 Live Upgrade?
啟動某啟動環境
轉至備用原始啟動環境
維護啟動環境
3. Live Upgrade (規劃)
Live Upgrade 需求
Live Upgrade 系統需求
安裝 Live Upgrade
必需的套裝軟體
Live Upgrade 磁碟空間需求
建立 RAID-1 磁碟區 (鏡像) 的 Live Upgrade 需求
使用套裝軟體或修補程式升級系統
使用
lucreate
指令建立檔案系統的準則
選取檔案系統磁碟片段的準則
為根 (
/
) 檔案系統選取磁碟片段的準則
為鏡像檔案系統選取磁碟片段的準則
建立 RAID-1 磁碟區 (鏡像) 檔案系統的一般準則
檢查磁碟區狀態
分離磁碟區與重新同步鏡像
使用 Solaris Volume Manager 指令
為交換磁碟區選取磁碟片段的準則
為新的啟動環境配置交換磁碟片段
當交換磁碟片段在使用中時建立啟動環境失敗
為可共用檔案系統選取磁碟片段的準則
自訂新啟動環境的內容
在啟動環境之間同步檔案
增加檔案至
/etc/lu/synclist
檔案
在啟動環境之間強制同步
啟動多重啟動環境
Live Upgrade 文字使用者介面
4. 使用 Live Upgrade 建立啟動環境 (作業)
安裝 Live Upgrade 和建立啟動環境 (作業說明)
安裝 Live Upgrade
如何使用
pkgadd
指令安裝 Live Upgrade
如何使用 Oracle Solaris 安裝程式安裝 Live Upgrade
安裝 Live Upgrade 所需的修補程式
如何安裝必要的修補程式
建立新的啟動環境
如何建立啟動環境 (第一次)
如何建立啟動環境與合併檔案系統
如何建立啟動環境與分割檔案系統
如何建立啟動環境與重新配置交換檔
如何使用清單來建立啟動環境與重新配置交換檔
如何建立啟動環境與複製可共用的檔案系統
如何從不同的來源建立啟動環境
如何針對 Flash 歸檔建立空的啟動環境
如何建立有 RAID-1 磁碟區 (鏡像) 的啟動環境
建立啟動環境與自訂內容
5. 使用 Live Upgrade 升級 (作業)
升級啟動環境 (作業說明)
升級啟動環境
升級準則
使用套裝軟體或修補程式升級系統
如何升級啟動環境中的網路安裝映像檔
如何從多張 CD 升級網路安裝映像檔
在啟動環境的網路安裝映像檔中增加或移除套裝軟體
在啟動環境的網路安裝映像檔中增加或移除修補程式
檢查安裝於啟動環境之套裝軟體
使用 JumpStart 設定檔升級
如何建立用於 Live Upgrade 的設定檔
如何測試用於 Live Upgrade 的設定檔
如何使用 Live Upgrade 透過設定檔進行升級
JumpStart 關鍵字值
在啟動環境上安裝 Flash 歸檔
如何在啟動環境中安裝 Flash 歸檔
如何使用設定檔安裝 Flash 歸檔
如何使用設定檔關鍵字安裝 Flash 歸檔
啟動某啟動環境
啟動某啟動環境的需求和限制
如何啟動啟動環境
如何啟動啟動環境並同步化檔案
x86: 使用 GRUB 功能表啟動某啟動環境
x86: 如何使用 GRUB 功能表啟動啟動環境
6. 失敗回復:轉至備用原始啟動環境 (作業)
SPARC: 轉至備用原始啟動環境
SPARC: 在成功啟動新啟動環境的情況下轉至備用環境
SPARC: 從失敗的啟動環境啟動中轉至備用環境
SPARC: 使用 DVD、CD 或網路安裝映像檔轉至備用原始啟動環境
x86: 轉至備用原始啟動環境
x86: 在成功啟動新啟動環境的情況下使用 GRUB 功能表轉至備用環境
x86: 在啟動環境啟動失敗的情況下使用 GRUB 功能表轉至備用環境
x86: 在啟動環境啟動失敗的情況下使用 GRUB 功能表和 DVD 或 CD 轉至備用環境
7. 維護 Live Upgrade 啟動環境 (作業)
Live Upgrade 維護的簡介
啟動環境的維護活動
顯示所有啟動環境的狀態
更新之前配置的啟動環境
取消排定的建立、升級或複製工作
比對啟動環境
刪除非使用中啟動環境
顯示使用中啟動環境的名稱
變更啟動環境的名稱
增加或變更與啟動環境名稱關聯的描述
檢視啟動環境的配置
8. 在已安裝非全域區域的系統上升級 Oracle Solaris 作業系統
在已安裝非全域區域的情況下使用 Live Upgrade 進行升級 (簡介)
瞭解 Oracle Solaris Zones 和 Live Upgrade
在具有非全域區域的情況下使用 Live Upgrade 的準則 (規劃)
當非全域區域位於獨立檔案系統時建立啟動環境
安裝非全域區域時建立和升級啟動環境 (作業)
在系統上安裝非全域區域時使用 Live Upgrade 進行升級 (作業)
升級已安裝非全域區域的系統 (範例)
在系統上安裝非全域區域時使用 Live Upgrade 進行升級
管理內含非全域區域的啟動環境
檢視啟動環境之非全域區域檔案系統的配置
比對已安裝非全域區域之系統的多個啟動環境
在包含非全域區域的系統上使用
lumount
指令
9. Live Upgrade 範例
使用 Live Upgrade 的升級範例
準備使用 Live Upgrade
使用 Pre Flight Checker 工具
建立啟動環境
升級非使用中的啟動環境
檢查啟動環境是否可啟動
啟動非使用中啟動環境
(可選擇) 轉至備用來源啟動環境
分離與升級單邊 RAID-1 磁碟區 (鏡像) 的範例
從現有磁碟區遷移至 Solaris Volume Manager RAID-1 磁碟區的範例
建立空啟動環境並安裝 Flash 歸檔的範例
建立空啟動環境
在新啟動環境上安裝 Flash 歸檔
啟動新啟動環境
第 2 部分使用 Live Upgrade 升級和遷移至 ZFS 根集區
10. Live Upgrade 和 ZFS (簡介)
Oracle Solaris 10 8/11 發行版本中的新增功能
Solaris 10 10/09 發行版本中的新增功能
使用 Live Upgrade 搭配 ZFS 簡介
從 UFS 檔案系統遷移至 ZFS 根集區
從 UFS 根 (
/
) 檔案系統遷移至 ZFS 根集區
將配置有 Solaris Volume Manager 磁碟區的 UFS 檔案系統遷移至 ZFS 根檔案系統
從 ZFS 根集區建立新啟動環境
在同一個根集區中建立新啟動環境
在另一個根集區上建立新啟動環境
從目前執行中系統以外的來源建立新啟動環境
在安裝非全域區域的系統上建立 ZFS 啟動環境
11. 針對 ZFS 執行 Live Upgrade (規劃)
使用 Live Upgrade 的系統需求和限制
12. 為 ZFS 根集區建立啟動環境
將 UFS 檔案系統遷移至 ZFS 檔案系統
如何將 UFS 檔案系統遷移至 ZFS 檔案系統
在同一個 ZFS 根集區中建立啟動環境
如何在同一個 ZFS 根集區中建立 ZFS 啟動環境
在新根集區中建立啟動環境
如何在新 ZFS 根集區上建立啟動環境
從目前執行中系統以外的來源建立啟動環境
轉至備用 ZFS 啟動環境
13. 針對已安裝非全域區域的 ZFS 執行 Live Upgrade
在安裝非全域區域的系統上建立 ZFS 啟動環境 (簡介與規劃)
從安裝非全域區域的 UFS 根 (
/
) 檔案系統遷移至 ZFS 根集區 (作業)
如何將 UFS 檔案系統遷移至具有非全域區域之系統上的 ZFS 根集區
第 3 部分附錄
A. Live Upgrade 指令參考
B. 疑難排解 (作業)
設定網路安裝時出現的問題
啟動系統時出現的問題
從媒體啟動時的錯誤訊息
從媒體啟動時的一般問題
從網路啟動,錯誤訊息
從網路啟動時的一般問題
Oracle Solaris 作業系統的初始安裝
x86: 如何檢查 IDE 磁碟是否有不良磁區
升級 Oracle Solaris 作業系統
升級錯誤訊息
升級時的一般問題
升級失敗後如何繼續升級
x86: 使用 GRUB 時,Live Upgrade 發生問題
使用執行 Veritas VxVm 的 Live Upgrade 升級時系統當機
如何在執行 Veritas VxVm 時進行升級
x86: 依預設,不會在沒有現有服務分割區的系統上建立服務分割區
從網路安裝映像檔或從 Oracle Solaris Operating System DVD 安裝軟體時如何包含服務分割區
從 Oracle Solaris 軟體 - 1 CD 或從網路安裝映像檔安裝時如何包含服務分割區
C. 附加的 SVR4 封裝需求 (參考)
防止修改目前的作業系統
使用絕對路徑
使用
pkgadd
-R
指令
$PKG_INSTALL_ROOT
和
$BASEDIR
之間的差異
撰寫程序檔的準則
維護無本地磁碟的用戶端相容性
驗證套裝軟體
安裝或升級時防止使用者互動
為各區域設定套裝軟體參數
進一步資訊
D. 升級時使用修補程式分析器 (作業)
升級成 Oracle Solaris 更新版次
如何使用
analyze_patches
程序檔
字彙表
索引
B
C
E
L
R
S
V
W
Z