システム・メッセージ: CMDTUXカタログ4300-4399
|
![]() |
![]() |
4306 |
ERROR: Could not send saved messages to site | |
|
Description |
While the |
Action |
Check the network on the machine with the affected | |
4307 |
ERROR: Cannot ASCII encode password (errno = val) | |
|
Description |
An error occurred while converting a non-ASCII |
Action |
Contact your Oracle TUXEDO system Technical Support. | |
4309 |
WARN: Invalid protocol response from site | |
|
Description |
The |
Action |
The | |
4310 |
エラー: 最初のDiffie-Hellmanパケットを取得できませんでした | |
|
説明 |
プロセスが |
アクション |
Oracle Tuxedoシステムのテクニカル・サポートに連絡してください。 | |
4311 |
ERROR: NADDR parameter is not a correct internet address. | |
|
Description |
The |
Action |
Any address in the | |
4312 |
ERROR: NLSADDR parameter is not a correct internet address. | |
|
Description |
The |
Action |
Any address in the | |
4313 |
エラー: リモート・ノードがインターネット・アドレスを解釈できません | |
|
説明 |
リリース6.3以上のOracle Tuxedoシステムが、それより古いリリースにインターネット・アドレスを送信しようとしました。 |
アクション |
リリース6.3より前のOracle Tuxedoシステムのリリースは、インターネット・アドレスのネーミング・スキームを理解できません。古いリリースと相互運用する場合は、以前のアドレス指定方法を使用する必要があります。インターネット・アドレスを以前の" | |
4314 |
ERROR: An error occurred when val attempted to access the service manager | |
|
Description |
While attempting to get the NT service name, an error occurred while opening the service manager. |
Action |
Contact your Oracle TUXEDO system Technical Support. | |
4315 |
ERROR: An error occurred when val attempted to allocate memory | |
|
Description |
While attempting to get the NT service name the task ran out of memory. |
Action |
Check the memory on the system where the command was run. If it seems that there should be enough memory for this operation, contact your Oracle TUXEDO system Technical Support. | |
4316 |
ERROR: An error occurred when val attempted to set the service status | |
|
Description |
While attempting to set the NT service status an error occurred. |
Action |
Contact your Oracle TUXEDO system Technical Support. | |
4317 |
ERROR: An error occurred when val attempted to register the service | |
|
Description |
While attempting to register the NT service an error occurred. |
Action |
Contact your Oracle TUXEDO system Technical Support. | |
4318 |
ERROR: An error occurred when val attempted to set the service status | |
|
Description |
While attempting to set the NT service status an error occurred. |
Action |
Contact your Oracle TUXEDO system Technical Support. | |
4319 |
ERROR: An error occurred when val attempted to access the registry | |
|
Description |
While attempting to access the NT registry an error occurred. |
Action |
Contact your Oracle TUXEDO system Technical Support. | |
4320 |
ERROR: An error occurred when val attempted to access the registry | |
|
Description |
While attempting to access the NT registry an error occurred. |
Action |
Contact your Oracle TUXEDO system Technical Support. | |
4322 |
ERROR: An error occurred when val attempted to start the service | |
|
Description |
While attempting to start the specified NT service an error occurred. |
Action |
Contact your Oracle TUXEDO system Technical Support. | |
4323 |
情報: Listenerプロセスが開始しました | |
|
説明 |
|
アクション |
アクションは不要です。 | |
4324 |
ERROR: can't create buffer - tpalloc() failed - val | |
|
Description |
A memory allocation failure occurred in |
Action |
Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
4325 |
ERROR: tpcall() failed, val | |
|
Description |
While tmconfig was processing a request, |
Action |
Check the error code that | |
4328 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
4329 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
4330 |
ERROR: Illegal character in the address val | |
|
Description |
An illegal |
Action |
Specify the | |
4331 |
ERROR: can't execute val | |
|
Description |
The AS400 could not execute the given command. |
Action |
Check the command syntax to be sure it is proper. If it is proper and the executable referenced in the command line is currently executable, contact your Oracle TUXEDO system Technical Support. | |
4332 |
ERROR: can't execute val | |
|
Description |
The AS400 could not execute the given command. |
Action |
Check the command syntax to be sure it is proper. If it is proper and the executable referenced in the command line is currently executable, contact your Oracle TUXEDO system Technical Support. | |
4333 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
サーバーの構築中にメモリーの割当てに失敗しました。 |
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
4334 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
AS400の |
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
4335 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
AS400の |
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
4336 |
ERROR: Could not get application parameters | |
|
Description |
|
Action |
Ensure that the | |
4337 |
ERROR: TUXCONFIG is not set | |
|
Description |
The |
Action |
Set the | |
4338 |
ERROR: TUXCONFIG is not set | |
|
Description |
The |
Action |
Set the | |
4339 |
ERROR: Could not get application parameters | |
|
Description |
|
Action |
Ensure that the | |
4340 |
ERROR: Could not establish network address val - check device and address | |
|
Description |
The |
Action |
Check the | |
4341 |
ERROR: Missing port number in the address val | |
|
Description |
The |
Action |
| |
4342 |
ERROR: Unable to reconnect to machine, address | |
|
Description |
The |
Action |
| |
See Also |
Messages 1375 and 1374 and | |
4343 |
ERROR: Could not establish listening endpoint address | |
|
Description |
|
Action |
Ensure that the listening endpoint is free for use by the | |
4344 |
エラー: FLDTBLDIR32を環境に配置できません | |
|
説明 |
|
アクション |
Oracle Tuxedoシステムのテクニカル・サポートに連絡してください。 | |
4345 |
エラー: FIELDTBLS32を環境に配置できません | |
|
説明 |
|
アクション |
Oracle Tuxedoシステムのテクニカル・サポートに連絡してください。 | |
4346 |
ERROR: Cannot run command on /etc/passwd | |
|
Description |
command ( |
Action |
Modify the | |
4348 |
エラー: MIBリクエストを終了中にエラーが発生しました | |
|
説明 |
|
アクション |
関連するメッセージがログにないか確認してください。 | |
4349 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
4350 |
INFO: BBL started on machine - Release val | |
|
Description |
This message indicates that a new machine has been booted and records the internal release number. This information may be useful to Oracle TUXEDO system support, if necessary. |
Action |
No action necessary. | |
4351 |
INFO: BBL on machine - Release val | |
|
Description |
This message is printed by the DBBL during the first sanity check after midnight for each booted machine. This information may be useful to Oracle TUXEDO system support, if necessary. |
Action |
No action necessary. | |
4352 |
WARN: Service name must be <= len characters in length; val will be truncated | |
|
Description |
While building a server, one of the specified service names is longer than the maximum allowed. The name will be truncated. |
Action |
No action is required. However, it is recommended that the name be shortened to the maximum allowed, as indicated by the message. | |
4353 |
ERROR: Port number cant be bigger than max-port in the address address | |
|
Description |
The port number portion of address is too large. |
Action |
Any address which starts with // must be a valid internet address. The following formats are recognized by the system: | |
4354 |
ERROR: Can't parse the address address | |
|
Description |
While attempting to resolve address, an error occurred. |
Action |
Any address which starts with // must be a valid internet address. The following formats are recognized by the system: | |
4355 |
エラー: ライセンス・レベルを判定できません | |
|
説明 |
現在のライセンス属性の取得中にエラーが発生しました。 |
アクション |
Oracle Tuxedoシステムのテクニカル・サポートに連絡してください。 | |
4356 |
エラー: /Eventsへのライセンスはありません | |
|
説明 |
/Eventsを使用するためのライセンスがありません。 |
アクション |
/Eventsのライセンスを購入してください。/Eventsのライセンスを所有しており、インストール済の場合は、Oracle Tuxedoシステムのテクニカル・サポートに連絡してください。 | |
4357 |
エラー: ライセンス・レベルを判定できません | |
|
説明 |
現在のライセンス属性の取得中にエラーが発生しました。 |
アクション |
Oracle Tuxedoシステムのテクニカル・サポートに連絡してください。 | |
4358 |
エラー: /Eventsへのライセンスはありません | |
|
説明 |
/Eventsを使用するためのライセンスがありません。 |
アクション |
/Eventsのライセンスを購入してください。/Eventsのライセンスを所有しており、インストール済の場合は、Oracle Tuxedoシステムのテクニカル・サポートに連絡してください。 | |
4359 |
エラー: ライセンス・レベルを判定できません | |
|
説明 |
現在のライセンス属性の取得中にエラーが発生しました。 |
アクション |
Oracle Tuxedoシステムのテクニカル・サポートに連絡してください。 | |
4360 |
エラー: トランザクションへのライセンスはありません | |
|
説明 |
トランザクションを使用するためのライセンスがありません。 |
アクション |
トランザクションのライセンスを購入してください。トランザクションのライセンスを所有しており、インストール済の場合は、Oracle Tuxedoシステムのテクニカル・サポートに連絡してください。 | |
4363 |
エラー: メッセージ・バッファを確保できません | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
4364 |
エラー: 掲示板からDBBLレコードを取得できません | |
|
説明 |
|
アクション |
Oracle Tuxedoシステムのテクニカル・サポートに連絡してください。 | |
4365 |
エラー: DBBLにメッセージを送信できません | |
|
説明 |
|
アクション |
Oracle Tuxedoシステムのテクニカル・サポートに連絡してください。 | |
4366 |
エラー: MIBリクエストを終了中にエラーが発生しました | |
|
説明 |
|
アクション |
同時にブロックしているMIB操作の数を減らしてください。この問題が引き続き発生する場合は、Oracle Tuxedoシステムのテクニカル・サポートに連絡してください。 | |
4367 |
エラー: MIBリクエストを終了中にエラーが発生しました | |
|
説明 |
|
アクション |
同時にブロックしているMIBS操作の数を減らします。この問題が引き続き発生する場合は、Oracle Tuxedoシステムのテクニカル・サポートに連絡してください。 | |
4368 |
エラー: TPINIT型付きバッファを割当てできませんでした | |
|
説明 |
掲示板に通常のクライアントとして登録する際、 |
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
4369 |
WARN: DBBLWAIT * 2 is greater than BLOCKTIME. DBBLWAIT = val,BLOCKTIME = val | |
|
Description |
The value used for |
Action |
Check the values used for both variables and adjust accordingly. | |
4370 |
WARN: DBBLWAIT * 2 is greater than BLOCKTIME. DBBLWAIT = val,BLOCKTIME = val | |
|
Description |
The value used for |
Action |
Check the values used for both variables and adjust accordingly. | |
4371 |
ERROR: Can't resolve host name in address address | |
|
Description |
While attempting to resolve the host name portion of address, an error occurred. |
Action |
Any address which starts with // must be a valid internet address. The following formats are recognized by the system: | |
4372 |
ERROR: Unknown address type: address | |
|
Description |
The given address does not correspond to a type known by the system. |
Action |
The Oracle TUXEDO system understands several types of address format. Addresses which start with // must be internet addresses. Addresses which start with | |
4373 |
ERROR: Can't resolve port number in address address | |
|
Description |
While attempting to resolve the port number portion of address, an error occurred. |
Action |
Any address which starts with // must be a valid internet address. The following formats are recognized by the system: | |
4374 |
ERROR: Can't convert the address address to binary format | |
|
Description |
An error occurred while converting address to an internal binary representation. |
Action |
Contact your Oracle TUXEDO system Technical Support. | |
4393 |
ERROR: tprealloc for TPINIT failed - reason-code | |
|
Description |
|
Action |
| |
4376 |
WARN: Incompatible license information (val) | |
|
Description |
While booting a new node, the licensed features did not match those features licensed on the master node. This could potentially cause inconsistent results if the master node is migrated to this site or if certain capabilities are accessed from that site. |
Action |
Ensure that the license file in | |
4377 |
エラー: SETリクエストで権限違反があります | |
|
説明 |
表示されたクラス・オブジェクトで/AdminAPI |
アクション |
管理者は、属性とユーザーの組合せに関する権限をシステムでサポートされる上限までチューニングできます。ただし、書込みアクセスは、あらゆる状態のクラス・オブジェクトの全属性に対してサポートされるわけではありません。このため、クラス・オブジェクトが別の状態に移るまで、更新を遅らせる必要がある場合があります。 | |
4378 |
ERROR: temp file creation failed | |
|
Description |
Creation of a temporary file in |
Action |
Ensure that there is sufficient space in | |
4379 |
ERROR: temp file creation failed | |
|
Description |
Creation of a temporary file in |
Action |
Ensure that there is sufficient space in | |
4382 |
ERROR: You do not have a valid SDK license | |
|
Description |
|
Action |
Buy a Oracle TUXEDO system SDK license. | |
4383 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
4384 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
4385 |
WARN: value val does not fit in character | |
|
Description |
While parsing the |
Action |
Correct the value and re-run | |
4386 |
WARN: dubious escape val | |
|
Description |
While parsing the |
Action |
Correct the value and re-run | |
4387 |
WARN: value val does not fit in character | |
|
Description |
While parsing the |
Action |
Correct the value and re-run | |
4388 |
WARN: dubious escape val | |
|
Description |
While parsing the |
Action |
Correct the value and re-run | |
4389 |
ERROR: string: -F option fails to reopen stderr | |
|
Description |
While running |
Action |
Re-run the operation. Ensure that there is sufficient file space. | |
4390 |
ERROR: Cannot open file file for reading | |
|
Description |
The event server couldn't open file file for reading the subscription database. |
Action |
The event server reads a new copy of the subscription database from the temporary file file. This message indicates that the server couldn't open the temporary file for reading. Check the file system parameters and take corrective action. | |
4391 |
ERROR: can't open input file file | |
|
Description |
An error occurred attempting to open the input file specified as |
Action |
Make sure the input file file exists and is readable. | |
4392 |
ERROR: can't open output file file | |
|
Description |
An error occurred attempting to open the output file file for write as specified by |
Action |
Make sure file system limit has not been exceeded and user has write permissions for the directory in which the output file is to be created. |
![]() |
![]() |
![]() |