システム・メッセージ: LIBTMIBカタログ100-199
|
![]() |
![]() |
100 |
ERROR: Class class is not writable by this user | |
|
Description |
A |
Action |
In cases where the information is not intended to be writable by the invoking user, this message is informational only and there is no action to be taken. If the administrator intended the user to have write access to the indicated class, then the permissions on the class need to be relaxed by setting appropriate permissions values via the | |
See Also |
| |
102 |
エラー: リクエストで認識されないフラグが設定されています | |
|
説明 |
参照ページに記載されているフラグ値以外の値が指定されました。 |
アクション |
リクエストを修正して、記載されているフラグ値のみが含まれるようにしてください。 | |
関連項目 |
| |
103 |
エラー: 管理関数をブロックするための子プロセスを作成できませんでした | |
|
説明 |
UNIXシステム・コール |
アクション |
オペレーティング・システムのチューニング可能なパラメータを調べ、全体で、およびユーザーごとに開始できるプロセスの数が十分であることを確認してください。必要に応じてカーネルを再構成してください。 | |
関連項目 |
UNIXリファレンス・マニュアルの | |
104 |
エラー: 無効な、または識別できないTUXCONFIG環境変数値です | |
|
説明 |
|
アクション |
| |
関連項目 |
| |
105 |
ERROR: Unable to map machine identifiers in configuration file tuxconfig | |
|
Description |
The TUXCONFIG file has been corrupted or is being accessed from a machine not configured in the application. |
Action |
Be sure that the file is being accessed from a machine that is configured in the application. If it is, then the file has likely become corrupted. In this case, remove the configuration file and regenerate it before continuing. | |
See Also |
| |
106 |
エラー: 非ブートの構成が非マスター・サイトで試みられました | |
|
説明 |
|
アクション |
マスター・マシンにログインして非ブート構成を実行するか、ローカル・マシンがアクティブになるまで待ち | |
関連項目 |
| |
107 |
ERROR: Configuration file tuxconfig is in an invalid state | |
|
Description |
The tuxconfig file accessed by |
Action |
Remove the tuxconfig file and regenerate it from scratch before continuing. | |
See Also |
| |
108 |
エラー: 構成されていないアプリケーションにおいて、T_DOMAIN以外のクラスに対してSET操作を実行することはできません | |
|
説明 |
アプリケーションがまだ構成されていないため、 |
アクション |
最初に | |
関連項目 |
| |
109 |
エラー: 内部のMIBデータ構造の初期化操作が失敗しました | |
|
説明 |
必要な内部データ構造体を初期化できなかったため、 |
アクション |
この障害に関する追加情報がないか、ローカルのユーザー・ログ・ファイルを確認してください。そこにあるメッセージには、基になる障害の原因およびアクションを示すカタログ名および番号が含まれています。 | |
関連項目 |
| |
110 |
ERROR: Could not open temporary file tmpfile for writing | |
|
Description |
The temporary file name tmpfile could not be opened for writing while attempting to process a |
Action |
Check the temporary file directory to be sure it is writable by the calling user and change the mode on the directory if necessary. | |
See Also |
| |
111 |
ERROR: Could not write to temporary file tmpfile | |
|
Description |
The temporary file name tmpfile could not be written to while attempting to process a |
Action |
Make sure that sufficient disk space is available on the filesystem where the temporary file is being written. | |
See Also |
| |
112 |
エラー: 初期構成にバックアップ・マスターを設定できません | |
|
説明 |
|
アクション |
まず、バックアップを指定せずにマスター・マシンのみの構成を作成し、バックアップ・マシンにするマシンを構成した後、 | |
関連項目 |
| |
113 |
エラー: ACCSTATSを非アクティブなアプリケーションに設定できません | |
|
説明 |
|
アクション |
この属性値を設定する前に、アプリケーションをアクティブ化してください。 | |
関連項目 |
| |
114 |
警告: 構成表が部分的に削除されます | |
|
説明 |
|
アクション |
バイナリの構成ファイルを手動で削除してください。 | |
関連項目 |
| |
115 |
エラー: 指定したT_SERVICEインスタンスに対応したT_ROUTINGインスタンスが無効です | |
|
説明 |
|
アクション |
この | |
関連項目 |
| |
116 |
エラー: 範囲基準名を識別するために重複するバッファ・タイプを設定できません | |
|
説明 |
|
アクション |
重複するバッファ・タイプをリクエストから排除してください。 | |
関連項目 |
| |
117 |
エラー: 現在のシステム状態ではTA_CLASS/TA_OPERATIONを同時に組合せできません | |
|
説明 |
|
アクション |
このリクエストを行う前に | |
関連項目 |
| |
118 |
エラー: TA_PASSWORDは正しくプリプロセスできません | |
|
説明 |
|
アクション |
/AdminAPIを起動する前に | |
関連項目 |
| |
119 |
エラー: TA_SECURITYを設定せずにTA_PASSWORDが指定されました | |
|
説明 |
|
アクション |
アプリケーションの | |
関連項目 |
| |
120 |
エラー: TA_PASSWORDを設定せずにTA_SECURITYが指定されました | |
|
説明 |
|
アクション |
リクエストに | |
関連項目 |
| |
121 |
エラー: 無効なシステム・フィールド値が指定されました | |
|
説明 |
システム生成フィールドに対して無効な値がリクエスト・バッファに含まれていました。 |
アクション |
Oracle Tuexdoシステムのテクニカル・サポートに連絡してください。 | |
関連項目 |
| |
122 |
エラー: セキュリティ情報を検査できませんでした | |
|
説明 |
マスター論理マシンに渡されたセキュリティ情報をシステムが検証できなかったため、 |
アクション |
マスター論理マシンのユーザー・ログで失敗の詳細を確認し、Oracle Tuexdoシステムのテクニカル・サポートに連絡してください。 | |
関連項目 |
| |
123 |
エラー: 一貫性のないパスワード情報が渡されました | |
|
説明 |
|
アクション |
リクエストを行う前に、 | |
関連項目 |
| |
124 |
エラー: tmloadcfのためにパスワード情報を設定できませんでした | |
|
説明 |
|
アクション |
この障害に関する詳細情報がないか、ローカルのユーザー・ログ・ファイルを確認してください。 | |
関連項目 |
| |
126 |
WARN: MIB mapping file file contains invalid data | |
|
Description |
file was found in the ${TUXDIR}/addonclasses directory but did not conform to the expected format for such a file. |
Action |
Contact your Oracle TUXEDO system Technical Support as to whether this file should be removed or replaced. In the meantime, the reported failure does not affect core administration of the system. It may affect administration of the related add-on product temporarily until a replacement file is available. | |
See Also |
| |
127 |
WARN: Could not add class class to mapping tables, tables full | |
|
Description |
The add-on class class could not be added because the internal class mapping tables are full. |
Action |
Contact your Oracle TUXEDO system Technical Support. | |
See Also |
| |
128 |
警告: 追加のMIBマッピングのロードが失敗しました | |
|
説明 |
アドオン・クラス・マッピングを内部表にロードしようとしましたが、1つ以上の障害が発生しました。 |
アクション |
インスタンス固有のユーザー・ログ・メッセージで詳細を確認し、Oracle Tuexdoシステムのテクニカル・サポートに連絡してください。 | |
関連項目 |
| |
129 |
エラー: 不明なクラスが参照されました | |
|
説明 |
|
アクション |
リクエストの | |
関連項目 |
| |
130 |
ERROR: Cannot set | |
|
Description |
A |
Action |
The permissions for existing attributes may be changed by removing the state change attribute from the request. | |
See Also |
| |
131 |
WARN: MIB mapping file file contains duplicate class class | |
|
Description |
The add-on class /AdminAPI mapping file file in the |
Action |
The duplicate entry is ignored. The file should be replaced or removed as recommended by your Oracle TUXEDO system Technical Support. | |
See Also |
| |
132 |
ERROR: Memory allocation failure processing /Admin request svc | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
See Also |
| |
133 |
ERROR: Fielded buffer access error Ferror | |
|
Description |
DESCRIPTION Fielded buffer access error Ferror occurred while adding error information to an /AdminAPI reply buffer. |
Action |
Contact your Oracle TUXEDO system Technical Support. | |
See Also |
| |
134 |
エラー: FML32タイプ・バッファでTA_OPERATIONが見つかりません | |
|
説明 |
/AdminAPIリクエスト・バッファでTA_OPERATIONの値が欠落しています。これは/AdminAPIリクエストに必要な入力パラメータであり、GET、 |
アクション |
入力バッファを修正して、TA_OPERATION属性の適切な値を含めてください。 | |
関連項目 |
| |
135 |
ERROR: TA_OPERATION specified (op) is invalid | |
|
Description |
Invalid value op for TA_OPERATION included in /AdminAPI request buffer. This is a required input parameter on all /AdminAPI requests and must have a value of GET, |
Action |
Correct the input buffer to include an appropriate value for the TA_OPERATION attribute. | |
See Also |
| |
136 |
ERROR: Invalid state change specified (old to new) | |
|
Description |
A |
Action |
Consult the appropriate | |
See Also |
| |
137 |
ERROR: Invalid field type fldtype for field fldid in internal structures | |
|
Description |
The internal /AdminAPI structures contain an invalid field type fldtype for the field identifier fldid. |
Action |
Contact your Oracle TUXEDO system Technical Support. | |
See Also |
| |
138 |
ERROR: FML32 error (Ferror) populating /Admin service reply buffer | |
|
Description |
An FML32 error Ferror occurred while populating the reply buffer for an /AdminAPI request. |
Action |
Contact your Oracle TUXEDO system Technical Support. | |
See Also |
| |
139 |
ERROR: System error (error) processing /Admin service request | |
|
Description |
An internal Oracle TUXEDO system/T error occurred while processing an /AdminAPI request. |
Action |
Contact your Oracle TUXEDO system Technical Support. | |
See Also |
| |
140 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
関連項目 |
UNIXリファレンス・マニュアルの | |
141 |
エラー: メモリーの割当てに失敗しました | |
|
説明 |
|
アクション |
マシンのメモリー量およびプロセスによって使用されるメモリー量に対して、オペレーティング・システム・パラメータが正しく設定されていることを確認してください。マシンのメモリー使用量を減らすか、マシンの物理メモリー量を増やしてください。 | |
関連項目 |
UNIXリファレンス・マニュアルの | |
142 |
ERROR: Error accessing table table of TUXCONFIG file | |
|
Description |
An error occurred accessing the table table in the binary configuration file while processing an /AdminAPI request. |
Action |
Contact your Oracle TUXEDO system Technical Support | |
See Also |
| |
143 |
ERROR: Error expanding table table of TUXCONFIG file | |
|
Description |
An error occurred while attempting to expand the table table in the binary configuration file as part of processing an /AdminAPI request. |
Action |
If the configuration file is stored in a UNIX System file, then clean up the UNIX System filesystem to create additional space for the file to grow. If the configuration file is stored on a raw device, then additional extents may need to be added to allow for table expansion. | |
See Also |
Administering the Oracle TUXEDO System, | |
144 |
ERROR: Fielded buffer access error (Ferror) processing /Admin request | |
|
Description |
An operation and/or value change that is not yet supported has been requested via the /AdminAPI. |
Action |
Modify the request to use only supported features. | |
See Also |
| |
145 |
エラー: サポート範囲外の操作、値が指定されました | |
|
説明 |
まだサポートされていない操作または値変更、あるいはその両方が/AdminAPIを介してリクエストされました。 |
アクション |
サポートされている機能のみが使用されるようにリクエストを修正してください。 | |
関連項目 |
| |
146 |
エラー: SET操作のプレイメージが失敗しました | |
|
説明 |
リクエストで指定されたプレイメージがクラス・オブジェクトの現在のイメージと一致しなかったため、 |
アクション |
指定されたプレイメージを変更して現在のクラス・オブジェクトと一致させるか、プレイメージ処理をオフに設定してください。 | |
関連項目 |
| |
147 |
エラー: SETリクエストで権限違反があります | |
|
説明 |
表示されたクラス・オブジェクトで/AdminAPI |
アクション |
管理者は、属性とユーザーの組合せに関する権限をシステムでサポートされる上限までチューニングできます。ただし、書込みアクセスは、あらゆる状態のクラス・オブジェクトの全属性に対してサポートされるわけではありません。このため、クラス・オブジェクトが別の状態に移るまで、更新を遅らせる必要がある場合があります。 | |
148 |
エラー: SETリクエストの属性値が無効です | |
|
説明 |
応答バッファの |
アクション |
問題の属性値を有効な値に修正してください。 | |
関連項目 |
| |
149 |
エラー: TA_STATEでSETと他の属性の変更が指定されました | |
|
説明 |
|
アクション |
状態以外の属性を変更するものと、状態を変更するものとに、リクエストを分割してください。 | |
関連項目 |
| |
150 |
エラー: 指定されたキー・フィールドはどのクラス・インスタンスにも一致しません | |
|
説明 |
状態以外を変更する |
アクション |
指定されたキー・フィールドが正しいことを確認してください。非アクティブ化されると自動的に消滅する一時的なオブジェクト( | |
関連項目 |
| |
151 |
WARN: Extra field present on /Admin SET request ignored, class/fldname | |
|
Description |
A |
Action |
Informational message only, no action required. | |
See Also |
| |
152 |
エラー: リクエストされたフィールドはSETリクエストにありません | |
|
説明 |
|
アクション |
欠落している必須フィールドの値を指定してから、リクエストを再生成してください。 | |
関連項目 |
| |
153 |
ERROR: VTOC error accessing device | |
|
Description |
An error occurred while accessing the VTOC (Volume Table Of Contents) on the Oracle TUXEDO system device device. |
Action |
device has been corrupted and needs to be destroyed and reinitialized before continuing. The device can be destroyed using | |
See Also |
| |
154 |
警告: /Adminブロッキング・リクエストでタイムアウトしました | |
|
説明 |
ブロックしている/AdminAPIリクエストがタイムアウトになったため、操作を完了できませんでした。操作のステータスは不確定です。 |
アクション |
タイムアウト間隔( | |
関連項目 |
| |
155 |
エラー: アクティブなアプリケーションで非ブートの構成更新が試行されました | |
|
説明 |
アクティブなアプリケーションで、アタッチされていない( |
アクション |
アプリケーションが非アクティブになるまで更新を延期するか、 | |
関連項目 |
| |
156 |
エラー: 一時ファイル名を作成できませんでした | |
|
説明 |
/AdminAPI処理用の一時ファイル名を生成できませんでした。 |
アクション |
Oracle Tuexdoシステムのテクニカル・サポートに連絡してください。 | |
関連項目 |
UNIXリファレンス・マニュアルの | |
157 |
エラー: 非アクティブなアプリケーションでクラス・インスタンスをアクティブ化できません | |
|
説明 |
|
アクション |
アプリケーションがアクティブになり、起動側の管理プロセスが | |
関連項目 |
| |
158 |
ERROR: TMIB service not available on site lmid for global SET operation | |
|
Description |
A |
Action |
Oracle TUXEDO system sites running releases prior to 5.0 do not have the /AdminAPI service and the requested global update cannot be done while those systems are active within the application. Otherwise, the indicated machines userlog file should be examined for possible causes of the missing service. The indicated machine can be deactivated and reactivated in an attempt to make the required service available. | |
See Also |
| |
159 |
エラー: アクティブなアプリケーションのT_ROUTINGクラスで複数のタイプ、サブタイプの組合せを設定できません | |
|
説明 |
アクティブなアプリケーションで |
アクション |
リクエストを分割してバッファのタイプとサブタイプの組合せごとに1つのリクエストを作成するか、アプリケーションが完全に非アクティブになるまで更新を延期してください。 | |
関連項目 |
| |
160 |
エラー: MIB_SELFは非クライアント/サーバー・プロセスで設定できません | |
|
説明 |
アタッチされていないプロセスからの |
アクション |
| |
関連項目 |
| |
161 |
ERROR: Could not read RESOURCES section in configuration file tuxconfig | |
|
Description |
The |
Action |
Remove and regenerate the binary configuration file before continuing. | |
See Also |
| |
162 |
ERROR: Unable to map machine identifiers in configuration file tuxconfig | |
|
Description |
The TUXCONFIG file has been corrupted or is being accessed from a machine not configured in the application. |
Action |
Be sure that the file is being accessed from a machine that is configured in the application. If it is, then the file has likely become corrupted. In this case, remove the configuration file and regenerate it before continuing. | |
See Also |
| |
163 |
ERROR: Configuration file tuxconfig is in an invalid state | |
|
Description |
The tuxconfig file accessed by |
Action |
Remove the tuxconfig file and regenerate it from scratch before continuing. | |
See Also |
| |
164 |
エラー: 新しい最大数を超えるアクティブなサーバーがあるためTA_MAXを減少できません | |
|
説明 |
|
アクション |
| |
関連項目 |
| |
166 |
ERROR: Cannot change workstation handler state to | |
|
Description |
A |
Action |
Use the | |
See Also |
| |
167 |
ERROR: TA_MINHANDLERS(min) must be less than or equal to TA_MAXHANDLERS(max) | |
|
Description |
A |
Action |
Correct the request to specify a minimum value less than or equal to the maximum value. | |
See Also |
| |
168 |
エラー: 動的/Adminサービスを通知できません、サービス名がありません | |
|
説明 |
関数に関連付けるサービス名が内部ルーチンで指定されなかったため、動的/AdminAPIサービスを通知できませんでした。 |
アクション |
Oracle Tuexdoシステムのテクニカル・サポートに連絡してください。 | |
関連項目 |
| |
169 |
エラー: TA_MINHANDLERSは、TA_MAXHANDLERS値が0のアクティブなT_WSLオブジェクトに対しては増加できません | |
|
説明 |
アクティブな |
アクション |
| |
関連項目 |
| |
170 |
ERROR: /Admin service svc on machine lmid unavailable | |
|
Description |
The /AdminAPI service svc is not available on logical machine lmid to satisfy the request. |
Action |
This error usually indicates that information specific to a particular site is referenced but the site is not currently active. In this case, the request should be redirected to an active site or deferred until the site in question is active. | |
See Also |
| |
171 |
ERROR: /Admin service svc unavailable | |
|
Description |
The /AdminAPI service svc is not available to satisfy the current request. |
Action |
Oracle TUXEDO system sites running releases prior to 5.0 do not have the /AdminAPI service and the requested service cannot be done while those systems are active within the application. Pre-5.0 machines can be deactivated so that the request can be completed. | |
See Also |
| |
172 |
INFO: Abortively terminating WSH process pid | |
|
Description |
An /AdminAPI request to change the state of a |
Action |
Informational message only, no action required. | |
See Also |
| |
173 |
エラー: グループ内にアクティブなサーバーが存在するために、TA_GRPNOを変更できません | |
|
説明 |
サーバー・グループ内の一部のサーバーがアクティブな状態で、 |
アクション |
サーバー・グループ内の残りのサーバーを非アクティブ化してから、変更を試行してください。 | |
関連項目 |
| |
175 |
WARN: Server RESTART set to Y and MAXGEN set < 2 | |
|
Description |
A |
Action |
No action is required. Normally, the | |
See Also |
|
![]() |
![]() |
![]() |