Configure the IGMP Query Maximum Response Time
- Enter Interface Configuration mode for VLAN 2.
SEFOS# configure terminal
SEFOS(config)# interface vlan 2
- Set the maximum response time to 200 seconds.
SEFOS(config-if)# ip igmp query-max-response-time 200
- Review the configuration information.
SEFOS# show ip igmp interface
vlan2, line protocol is up
Internet Address is 126.96.36.199/8
IGMP is enabled on interface
Current IGMP router version is 2
IGMP query interval is 125 seconds
Last member query response interval is 10 seconds
IGMP max query response time is 200 seconds
Robustness value is 3
IGMP querying router is 188.8.131.52 (this system)
Fast leave is disabled on this interface
No multicast groups joined