Go to main content
Sun Flash Accelerator F80 PCIe Card Security Guide

Exit Print View

Updated: December 2016
 
 

Sun Flash Accelerator F80 PCIe Card Description

The following sections are included:

The Sun Flash Accelerator F80 PCIe Card is a turnkey PCI-E 2.0, HBA, low-profile form factor, flash memory storage card. The following image shows the Sun Flash Accelerator F80 PCIe Card:

image:Figure showing card ISO image.

Refer to the Sun Flash Accelerator F80 PCIe Card User Guide for detailed product information.

Hardware Components

The Sun Flash Accelerator F80 PCIe Card contains the following hardware components:

  • Four SSD flash memory modules: Total of 800 GB 24 nm eMLC NAND flash memory is directly mounted on the card.

  • PCI-E to SAS protocol controller: Sun Flash Accelerator F80 PCIe Card SATA interface to the protocol controller has a PCI-E 2.0 x8 host interface connecting to an LSI 2008 SAS/SATA 2 x4 6 Gbps protocol controller.

  • Energy storage components: Flush uncompleted writes to flash memory if system, or PCIe slot, power fails.

Refer to the Sun Flash Accelerator F80 PCIe Card User Guide for detailed information.

Software and Firmware Components

The following modules are included with the Sun Flash Accelerator F80 PCIe Card:

Component
See
MegaRAID Storage Manager (MSM)
Diagnostic Services
Linux Diagnostic Driver
SNMP
WarpDrive Controller FW
Warp Drive Controller Firmware Security
SSDFW
DDCLI Utility

Refer to the Sun Flash Accelerator F80 PCIe Card User Guide for detailed information.