| Agile Product Lifecycle Management Readme Release 9.3.3 E39274-02 |
|
 Previous |
 Next |
This chapter contains a list of known issues for this release. These were deferred from this release, but may be fixed in a future release. Numbers in this section are for Oracle Agile internal use only.
This list of Known Issues consists of those found at the time of the initial release. The product may have additional issues found after the initial release and therefore this list is subject to change and is not always comprehensive. Oracle support will continue to track known issues of this product release found on My Oracle Support. Please check for updates at https://support.oracle.com.
14650048
DB Upgrade/AUT
Issue: AUT UPGRADE PC8.5 TO 9.3.3 FAILED ON ORACLE 11.2.0.3 DATABASE SERVER
Steps to Reproduce:
1. Import PC8.5 dump on Oracle Database Server 11.2.0.3.
2. Configure the PC8.5 schema as source DB and new db schema as target DB in aut.properties.
3. Upgrade PC8.5 to 9.3.2 by AUT.
Result: AUT upgrade failed with the error message as follows:
[exec] ERROR at line 1:
[exec] ORA-03113: end-of-file on communication channel
[exec] Process ID: 7537
[exec] Session ID: 145 Serial number: 59885
[exec] ERROR:
[exec] ORA-03114: not connected to ORACLE
Expected Result: AUT should upgrade PC8.5 to 9.3.2 successfully.
Workaround: N/A
15861104
Sourcing Project
Issue: MFR PART WITH LCP (AT CLASS LEVEL) NOT RETAINED ON APPLY FILTER IN SP > AML TAB
Steps to Reproduce:
1. Log in to Java Client.
2. Navigate to the Manufacturer Part > Mfr Parts class > Lifecycle phase tab, and add a new LCP as Engineer.
3. Log in to Web Client as admin.
4. Open a PCM Sourcing Project.
5. Add Items with AMLs (the AML with lifecycle phase as Engineer).
6. Go to the AML tab, and click on Personalize.
7. Set up the filter as Lifecycle Phase In Engineer (or any available value), then click Apply.
Result: The value is not retained in the filter and no results are displayed.
Workaround: Remove the filter and refresh the Analysis tab.
15969939
Web Client
Issue: TRANSFER FROM INACTIVE USER DOES NOT WORK AS EXPECTED WHEN IT IS FROM USERGROUP
Steps to Reproduce:
1. Log in to Web Client as super user. Make sure that user user1 and user2 have all Changes related privileges.
2. Make user1 a member of UG1.
3. Create ECO1, assign Default ECO workflow, move to CCB, add UG1 as approver and select Any.
4. Create ECO2, assign Default ECO workflow, move to Submitted, add UG1 as approver and select any under CCB status.
5. Set user1's status as Inactive.
6. Open user1 and click Transfer Authority (TA) button.
7. Click on Add button to create new TA.
8. From user = user1, touser = user2, start date = today, start time =current time + 1 minute later, to date = today, end time = current time + 10 minutes later, Criteria = All Change Orders, Affected Changes = All Changes, then OK.
9. Wait until the notification thread sends out the TA creation email.
10. Log in to Web Client as user2, open ECO1, ECO2 to Workflow tab.
Result: For ECO1, the Approve/Reject button is disabled because the inactive user is removed from the User Group automatically. (This is the old behavior.)
11. Move ECO2 status to CCB.
Result: When the user routes ECO2 to CCB, error message "Approvers UG1 have been removed since they do not have sufficient privileges." is displayed. (In the old behavior, a user group without any users can not be added as reviewer.)
Expected Result: Transfer authority from user group to active user works well.
Notes: It is introduced by old behavior.
Workaround: N/A
15970262
Web Client
Issue: APPROVE/REJECT DISABLED FOR TA USER WHEN AFFECT CHANGE DURING TIME PERIOD - PQM
Steps to Reproduce:
1. Set Notification Type as Inbox for "Transfer Authority, Create or Modify".
2. Log in to Web Client as super user, make Users, user1 and user2, have all PQM related privileges.
3. Create one Problem Report, PR1, assign DefaultPR workflow, move to submitted, and add user1 as approver under CCB status.
4. Open user1 and set user1 as inactive.
5. Click Transfer Authority button then click on Add button to create new TA.
6. From user = user1, trouser = user2, start date = today, start time =current time + 1 minute later, to date = today, end time = current time+ 10 minutes later, Criteria = All Problem Reports, Affected Changes = All Changes During Time Period, then OK. (key step)
7. Wait until the notification thread is out TA creation email.
8. Log in to Web Client as user2, move PR1 to CCB status and go to the Workflow tab.
Issue: Approve/Reject button is disabled.
Expected Result: Approve/Reject button should be enabled.
Note: 9. Go to Home > workflow routing, PR1 appears in the workflow routing table and is correct.
Workaround: N/A
16010163
Administration/Configuration
Issue: CRITERIA WITH MULTILIST THAT CONTAINS ANY DOES NOT WORK
Steps to Reproduce:
Precondition:
1. In Admin, go to Parts > Page Two > enable MultiList16 and point to Users dynamic list.
2. Enable Change Orders.Affected Item.Item P2 MultiList16.
3. Grant read privilege on Item.P2.MultiList16and ChangeOrders.AI.ItemP2MultiList16.
4. Create a criteria Criteria4: ChangeOrders.AI.Item P2 MultiList16 Contains Any Yvonnec.
5. Save As Default Change Orders workflow to DefaultECO3.
6. Add the Criteria4 into Submitted status, and remove the preexisting criteria from submitted status.
Test Steps:
1. Create Part1.
2. Select user Yvonnec to MultiList16.
3. Create ECO1 against Part1.
4. Select DefaultECO3 workflow.
5. Try to move the ECO to Submitted status.
Issue: The error shows: No matching entry criteria. Submitted.
Expected Result: ECO1 should be able to move to Submitted status.
Workaround: N/A
16043700
Web Client
Issue: ATTRIBUTE NAME THAT CONTAINS DOUBLE QUOTE CANNOT BE SHOWN IN TABLE ON WEB CLIENT
Steps to Reproduce:
1. In Admin, enable Parts.BOM.Item List01, and re-name it to Item "List01".
2. Assign read privilege on this attribute.
3. Log in to Web Client.
4. Open an assembly and try to find the attribute: Item "List01".
Issue: There is an empty column.
Expected: The attribute with double quotes should appear in the table on Web Client.
Workaround: N/A
16181836
Web Client
Issue: SAVE AS XML-EDIT/READ ONLY IS NOT REFRESHING PROJECT SCREEN
Steps to Reproduce:
When the user performs Save As XML - Edit action from a Project's Actions menu, the project screen does not refresh, so that the Actions menu - Load Microsoft Project XML option remains in a disabled state. The user has to explicitly click on the Refresh button for the Actions menu option to get enabled.
Workaround: Click on the Refresh button in the top pane tool bar to refresh the page.
16200379
Searches
Issue: CANNOT SEARCH WITH CONTAINS ANY FOR PQM.AI.ITEM P2 MULTILIST WITH MANY VALUES
Steps to Reproduce:
1. Log in to Java Client as admin.
2. Go to Classes > Parts > Page Two, enable p2.Multilist20 and set it point to List:User Group.
3. Log in to Web Client as admin.
4. Create a Part, P001, select 250 User Groups (such as UG001 to UG250) for P001.p2.Multilist20.
5. Create a Problem Report, PR001, add P001 to its AI table.PR001.AI.Item P2 Multilist20 displayed correctly.
6. Do an Advanced Search: Product service requests > Problem Reports > AI.Item P2Multilist20 > contains any > UG001, run the search.
Issue: Cannot search any problem reports.
Expected result: PR001 met the search criteria and should be returned as a result.
Workaround: N/A
16227552
Searches
Issue: EXPORTED/PRINTED NUMERIC VALUES ARE NOT SAME AS THE VALUES IN THE UI
Steps to Reproduce:
1. In Admin, enable BOM Numeric01 and BOM Numeric06, both Scale = 2.
2. In Web Client, open a Part1 which contains Part2 as its BOM.
3. Edit BOM Numeric01 = 12.345, BOM Numeric06 = 0.
4. Save. Notice that BOM Numeric01 = 12.35 and BOM Numeric06 = 0.00.
5. Perform an Advanced Search with output includes BOM Numeric01 and BOM Numeric06 Condition: BOM Numeric01 Is Not Null.
6. Click More > Export (csv), check the exported values for Numeric attributes.
Result: For BOM Numeric01, it shows 12.345 and for BOM Numeric06 it shows 0
Workaround: N/A
16384667
Web Client
Issue: MULTILIST DOES NOT CHANGE TO SEARCH TYPE AUTOMATICALLY ACCORDING TO SETTINGS
Steps to Reproduce:
1. Log in to Java Client as admin.
2. Set Maximum List Values Displayed = 20.
3. Set list - Category 10 List display type as list and create 25 list values.
4. Assign Category 10 List for Part.P2.Multilist02.
5. Log in to Web Client as admin.
6. Create a part, P001, and edit P2.Multilist02.
Issue: Multilist02 is not shown as search type.
Expected Result: Multilist02 should be shown as the search type because the values of catetofy10 is more than 20.
Workaround:
7. Select a value for multilist02 then save.
8. Click the edit button again then check multilist02, it will show as search type.
16685007
Import
Issue: [REQ00512] COMPLETE REPLACE + RETAIN WITH BLANK DATA UPDATES ON BOM
Steps to Reproduce:
Steps:
1. Create Parts: P00001 and P00002.
2. Add P00001 on BOM of P00002.
3. Add a MFR Part on the Manufacturers tab of the P00002.
4. Enable all the BOM and Manufacturer tab modifiable attributes (Ex: BOM.Text01, BOM.Multitext31... ,MFR.Tab Date01...)
5. Enter data to the BOM and AML attributes.
6. Create a source file of BOM Level Template with blank data for BOM and MFR tab attributes.
7. Import with Complete Replace multirow update mode + Retain blank data action.
Expected Result: The BOM data should be retained
Actual Result: The BOM data is not retained, but is updated/replaced with the blank data while AML data is retained.
Workaround: Provide Find Num in the BOM AML Level templates to avoid the error messages (or) use Complete Replace + Overwrite blank data options to replace Find Num with blank data.
16685069
Import
Issue: [REQ00512] ADD/UPDATE + RETAIN/OVERWRITE WITH COMPLETE BLANK DATA THROWS ERROR
Steps to Reproduce:
1. Create Parts: P00001 and P00002.
2. Add P00001 on BOM of P00002.
3. Add a MFR Part on the Manufacturers tab of the P00002.
4. Enable all of the BOM and Manufacturer tab modifiable attributes (Ex: BOM.Text01, BOM.Multitext31... ,MFR.Tab Date01...).
5. Enter data to the BOM and AML attributes.
6. Create a source file of BOM Level Template with blank data for BOM and MFR tab attributes.
7. Import with Add/Update multirow update mode + 'Retain/Overwrite' blank data action.
Expected: The BOM and AML data should be either retained for the retain action or overwritten with blank data for the overwrite action.
Actual: There is an error "Item Number: KP00001]: Could not process the BOM and/or AML for Item 'P00002' - BOM/AML/Attachments will be rejected: Duplicateitems: Items P00001 is already used on the BOM for Part P00001."
Workaround: Provide Find Num in the BOM AML Level templates to avoid the error messages (or) use Complete Replace + Overwrite blank data options to replace Find Num with blank data
16827444
Web Client
Issue: ADDING A SUPPLIER FROM SAVED SEARCH IN RFQ > RESPONSES TAB DOES NOT ADD THE SUPPLIER
Steps to Reproduce:
1. Log in to Web Client.
2. Do an Advanced Search on Suppliers.
3. Save the searches in Personal searches.
4. Create a Part.
5. Create a Sourcing Project and add the Part.
6. Create an RFQ and go to the Responses tab.
7. Click on Add > Suppliers.
8. Click on Custom Search > Open the Saved searches.
9. Try to add Suppliers from the search result.
Issue: The page keeps loading, but the Supplier is never added.
Workaround: The user can add the Suppliers (saved search) from the Auto Assign Suppliers wizard.
16951694
Software Development
Issue: FAILED TO SET QUERY CRITERIA WITH OPERATOR IN/NOT IN ON WORKFLOW.APPROVER
Steps to Reproduce:
1. Create one query on an ECO with search criteria: [Workflow.Approver] in ([General Info.User ID] == 'yvonnec')
2. Execute the query:
Actual Result: Catch Error when query criteria with the operator in/not in for Workflow.Approver/Approver Action.
Error code : 60072
Error message : Unsupported operand datatype
Root Cause exception :
com.agile.util.exception.CMAppException:
Unsupported operand datatype
Workaround: Use operator "contains" instead of "in".
16968886
Notifications & Subscriptions
Issue:
1. CANNOT RECEIVE NOTIFICATION WHEN TASK LOADACROSSSERVERS IS SET TO NO
2. RECORDS IN TABLE SIMPLE_SEARCH_HISTORY THAT HAVE A CREATED DATE OLDER THAN ONE DAY CANNOT BE CLEANED UP AUTOMATICALLY WHEN TASK LOADACROSSSERVERS IN ATTACHMENT PURGING TASK IS SET TO NO
Steps to Reproduce:
(Issue #1)
1. Log in to Java Client as admin.
2. Open Attachment Purging Task, set Task LoadAcrossServers = No.
3. Run resetQuerySeqLastNumber.sql to set remain sequence id to 0.5 Billion.
Issue: The user can not receive notification when Task LoadAcrossServers is set No.
Expected Result: The user can receive notification whether Task LoadAcrossServers is set to Yes or No.
(Issue #2)
Precondition: There are several records created one day ago. 1. Log in to Java Client as admin. 2. Go to Admin > Server Settings > Preferences >Record simple search. 3. Select Enabled. 4. Log in to Web Client as admin. 5. Do a simple search: Users-->demo*. 6. Connect the DB, run the sql command: Select * from SIMPLE_QUERY_HISTORExpected Result: Should be able to find records created today and records created one day ago should be cleaned up.
Workaround: Open the Attachment Purging Task and set Task LoadAcrossServers to Yes.
16988423
Relationship
Issue: SITES RELATIONSHIP PRINT DOES NOT WORK
Steps to Reproduce:
Preconditions: Revisions of sites are enabled.
1. Create a site and enable them.
2. Go to the Sites Relationship tab.
3. Add some rev like Part and non-rev controlled objects like ECO and Manufacturer.
4. Go to the site > Action > Print > Relationships tab only.
5. Click the preview button.
Issue: No values are displayed in the UI.
Expected Result: Relationship values can be previewed successfully.
Workaround: N/A
17026453
Software Development Kit
Issue: FAILED TO ADD ATTACHMENT BY SDK
Steps to Reproduce:
1. Add attachment by SDK ITable.createRow().
Issue: Sometimes it fails with error java.lang.NullPointerException.
Workaround: Set "agile.sso.expirationTime" in the agile.properties file to a bigger value, e.g. 600 sec. Restart the server, then add attachment.
Location of agile.properties:
1. <Agile_Home>\agileDomain\applications\application. ear\APP-INF\classes\
2. <Agile_Home>\agileDomain\config
17034199
Main Install
Issue: CANNOT LOG IN TO JAVA CLIENT WITH JAVA 6
Steps to Reproduce: N/A
Workaround: Agile 9.3.3 is only certified/supported on Java 7 and does not support Java 6.
17078502
Relationships
Issue: QUICK VIEW OF CONTENT IS NOT NAVIGATING TO SPECIFIC REVISION FROM NAVIGATOR
Steps to Reproduce:
Prerequisite: Set preference "Display PPM content in Navigator" to Yes.
1. Create a Program with some child objects.
2. Navigate to a child object and add a few Item objects.
3. Add a few revisions, e.g. A & B, to the Item objects.
4. Select a specific revision, e.g. A, in the Content tab.
5. Launch Quick view for the Item from the Content tab.
Note: For the Item objects, Quick view displays the specific revision A. This is correct behavior.
6. Click on the Navigator button. Launch Quick View for the Item object.
Note: It displays the latest revision in Quick View.
Workaround: Navigate to latest revision and select the specific version.
17082996
Software Development Kit
Issue: FAILED TO LOAD THE CONFIGURATION FILE SERVER.CONF
Steps to Reproduce:
1. Install the Application Server on one server machine.
2. Install the File Manager on another server machine.
3. Add an Attachment for an Item in Web Client. It works well.
4. Add an Attachment for an Item via SDK.
Actual Result: Get the error: Failed to load the configuration file server.conf java.io.IOException: Unable to load server.conf.
Expected Result: Adding the Attachment via SDK works well.
Workaround: Copy the file server.conf (in <Agile Home>/agileDomain/config) from File Manager server to App server (<Agile Home>/agileDomain/config).
17204207
Folders, Files, & Attachments
Issue: UNABLE TO CONFIGURE WEBDAV FOR SSO URL
Steps to Reproduce:
1. Restart the WIN7 - WebClient Service. 2. Open the command prompt and type "net use * http://<FileServerHostName>:8080/webdav/<networkpwd> /USER:<networkuserid>".Actual Result: System error 67 occurs. The network name cannot be found.Expected Result: WebDav should be configured for the user's network credentials.
Workaround: Configure webdav for the admin user.
17222916
Item & BOM
Issue: PRINT EFFECTIVE FROM: ... TO ... ON THE BOM TAB, NOT ON PAGE HEADER
Steps to Reproduce:
1. Create a Part, part1, and add some parts as its BOM.
2. Create ECO1 for part1 and modify the Effective Date and Obsolete Date.
3. Create ECO2 for part1 and modify the Effective Date and Obsolete Date for the Affected Item objects.
4. Go back to Part1 tab.
5. Check the Effective From: ... to ... have values.
6. Go to part1 > Action > Prin.t
Issue: Effective From: ... to ...? Print in the BOM tab header.
Expected Results: It should print on a whole page header.
Workaround: N/A
17258947
EC Services
Issue: ITEMS SHOWN TWICE IN DESIGN'S RELATIONSHIP TAB WHICH IS NOT AS EXPECTED
Steps to Reproduce:
1. Create a Part by Pro/E.
2. Click Agile > save button and try to save it to Agile.
3. In the Agile save preview window, click the Create Items button.
4. Click the Continue button and save it to Agile.
5. Open the object in the Agile web client and check the Relationship tab.
Issue: There are two duplicate Items shown in the Relationship tab.
Expected Result: The Item should be shown on just one row on the Relationship tab, with no duplicate rows.
Workaround: N/A
17268300
Searches
Issue: CANNOT ADD ALL SELECTED OBJECTS TO THE RELATIONSHIPS TABLE WITH ENTER KEY
Steps to Reproduce:
1. Log in to Web Client as admin.
2. Search for a Part, e.g. P001, andgo to its Relationships table. Try to add all Change Orders by Advanced Search: changes >change orders and run the search. Select all change orders. Click the Enter key on the keyboard to add.
Issues: All Change Orders can be selected successfully, but only 30 of them can be added to P001.relationships table successfully.
Expected result: All selected Change Orders should be added to the P001.Relationships table.This issue exists in all objects
Workaround: Use Copy & Paste or Drag & Drop to add the selected objects.
17287416
Folders, Files, & Attachments
Issue: [REQ00468] UNKNOWN NUMBER:OBJECT DOES NOT EXIST. ERROR DISPLAYING WHILE CREATING OBJECT
Steps to Reproduce:
Precondtion: Set SmartRule Copy Files to Rev to copy/copy with warning.
1. Log in to Web Client.
2. Create a Part.
3. Add 2GB, 4GB, 6GB files.
4. Create a Change against the Part.
Actual Result: The Change does not get created and an error "Unknown Number:Object does not exist" is thrown after 10-15 minutes
Workaround: Increase the inactive time setting from 30 to 120 in agiledomain\config\jdbc\CP-AgileContentPool-jdbc.xml:
<jdbc-connection-pool-params>
...
<inactive-connection-timeout-seconds>30</inactive-connection-timeout-seconds>
</jdbc-connection-pool-params>
17330976
Main Install
Issue: [HP_UX] START AGILE UNSUCCESSFULLY IF DON'T ADD '-D64' IN STARTAGILE.SH
Steps to Reproduce:
1. Install Agile933.
2. In Java Home panel, don't check 'Check if JDK is 32-bit'.
3. After installing successfully, start Agile.
Expected Result: Agile starts successfully.
Actual Result: Cannot start Agile successfully.
Workaround: [BEFORE INSTALLING]
Add parameter '-d64' to start of property JAVA_ADDITIONAL_OPTIONS_JDKSUN64 in install.properties file
=OR=
[AFTER INSTALLING]
Add parameter '-d64' behind "$JAVA_HOME/bin/java" in standalone/managed app server startup scripts (e.g. 'startAgile.sh').
17445950
SDK (PQM)
Issue: INCORRECT ERROR CODE WHEN BATCH ADDING PSR IN PROBLEM REPORT.RELATED PSR TABLE
Steps to Reproduce:
Batch add PSR in Problem Report.Related PSR table via SDK.
>>>
IServiceRequestm psr = (IServiceRequest)session.createObject(ServiceRequestConstants.CLASS
_PROBLEM_REPORT, psrNumber);
ITable table =psr.getTable(ServiceRequestConstants.TABLE_RELATED PSR);
IRow[] rowArray = table.createRows(new Object[]{pr, pr2, pr3});
Actual Result: Get the error: Error Code: 60086 Error Message: Call APIException.getRootCause() for details.
Expected Result: Should get the error 60049 which means that the action is not supported.
Workaround: N/A
17446173
Software Development Kit
Issue: NO ERROR WHEN SETTING 'SIGNOFF USER DUAL IDENTIFICATION TYPE' WITH USER ID
Steps to Reproduce:
1. Log in to Java Client, go to Preferences.
2. Set Display UserID as Yes.
3. Using SDK, try to set Signoff User Dual Identification Type with User ID.
*************
IProperty propSecondSignature =
node.getProperty("Signoff User Dual IdentificationType");
IAgileList lst = propSecondSignature.getAvailableValues();
lst.setSelection(new Object [] {"User ID"});
propSecondSignature.setValue(lst);
Actual Results: Signoff User Dual Identification Type is set with User ID by SDK with no error.
Note: In Java Client, try to set Signoff User Dual Identification Type with User ID when Display UserID is Yes. It failed to set and catches error: "System Preference "Display UserID" must be set to "NO" when System Preference "Signoff User Dual Identification Type" is set to "UserID"'
Expected Results: SDK should check the value of Display UserID when setting Signoff User Dual Identification Type with User ID.
Workaround: N/A
17474047
DB Upgrade/AUT
Issue: AUT EXECUTE-FTS-POST-TASKS-921 ROUTINE NOT WORKING ON 9.3.3/9.3.2
Steps to Reproduce:
1. Import a 932 or 933 demo DB.
2. Run update_content_url.bat/sh.
Expected Result: update_content_url.log file logs build failed and throwserror message indicating that this task is only for use with Agile PLM version 9.3.1.x and prior databases in update_content_url.log.
Expected Error Message: The update_content_url task in AUT is not for use with Agile PLM 932 or later releases. Please refer to the product documentation or contact Agile Support for more information.
Workaround: N/A
17491771
Software Development Kit
Issue: REJECT NOT WORK WITH TA FOR SECOND SIGNATURE
Steps to Reproduce:
1. Log in to Java Client, go to Preferences node.
2. Set Signoff User Dual Identification Type with User ID.
3. Open workflow Default Change Orders.
4. Switch to Status tab, open CCB status.
5. Set Dual Identification Required with Yes.
6. Create 2 users u1 and u2.
7. Create TA: from u2 to u1, with criteria All Change Orders and Affected Changes All Changes.
8. Create an ECO, eco1, add u2 as approver to CCB status.
9. Log in with u1, Do Reject by eco1.reject("agile", u1, "REJECTED", null, null,
null, col, false).
Actual Results: Failed to reject with following error:
***************************
Error code : 1108
Error message : Please select the correct groups you are rejecting for.
***************************
Expected Results: SDK should be able to reject with TA for second signature.
Code Location:
Feature ID: PC.IChange.Approve/Reject.Change.Sequentially
Class Name: sdk.testcases.IChange.SecondSignatureTest
Test Method: testgetTAFromUsers_Complex_ApproveChange_Sequentially (Approve/Reject Change Sequentially)
Status: Error
***************************
Failed when call ==> chg.reject("agile",
userName, "REJECTED THIRD USER", null, null,
null,
cols[2], false);
Error code : 1108
Error message : Please select the correct groups you are rejecting for.
Root Cause exception : com.agile.util.exception.CMAppException: Please select the correct groups you are rejecting for.
...
sdk.testcases.IChange.SecondSignatureTest.approveChange_sequentially(SecondSignatureTest.java:1786
)
At sdk.testcases.IChange.SecondSignatureTest.testge tT AFromUsers_Complex_ApproveChange_Sequentially(SecondSignatureTest.java:910)
Workaround: Use IRoutable.reject(String password, String secondSignature, String comment, Collection notifyList, Collection rejectForGroupList, Collection escalations, Collection transfers, boolean signoffForSelf, boolean notifyOriginator, boolean notifyCCB, boolean notifyChangeAnalyst, boolean urgent )
17571294
Administration/Configuration
Issue: SEARCH RESULTS ARE NOT LIMITED TO THE SETTING FOR LIST/MULTILIST IF IT IS POINTING TO A NEWLY CREATED DYNAMIC USERS LIST
Steps to Reproduce:
Preconditions:
1. Create a new dynamic list with all users criteria: TestAllUsers.
2. Point Parts.Page2.List01 to TestAllUsers dynamic list.
3. Set Preference: Maximum List Values Displayed = 250 (in the system there are more than 250 users)
Test Steps:
1. Create Part, Part01.
2. Click the Search button for Page2.List01, search with *.
Issue: It returns all users.
Expected Result: Agile should return 250 users based on the setting of Maximum List Values Displayed.
Workaround: Point the list/multilist attribute to the pre-existing dynamic list "Users" instead of creating a new users dynamic list.
|
 Copyright © 2010, 2013, Oracle and/or its affiliates. All rights reserved. Legal Notices |
|