StorageTek Storage Archive Manager and StorageTek QFS Software samu User Interface GuideRelease 5.4 E48431-02 |
|
Next |
samu
a
(Display Archiver Status Screen)
abr
(Enable Application Based Recovery)
add
(Add Equipment to a Mounted File System)
alloc
(Enable Storage Allocation on a Device)
aplease
(Set Append Lease Expiration Time for a Shared File System)
aridle
(Stop Archiving Gracefully)
arrerun
(Restart the Archiver Non-Disruptively)
arrestart
(Restart the Archiver Disruptively)
arrmarchreq
(Remove Archive Requests)
arrun
(Start Archiving)
arscan
(Scan a File System for Unarchived Files)
arstop
(Stop All Archiving Immediately)
artrace
(Perform Archiver Tracing)
atime
(Configure Access Time Updates for a File System)
audit
(Audit Library or Library Slot)
c
(Display Device Configuration Screen)
clear
(Clear a Load Request for a Removable Storage Volume)
d
(Display Daemon Trace Controls Screen)
def_retention
(Set Default WORM Retention Time)
devlog
(Set Device Logging Options)
dio_rd_consec
(Limit the Number of Consecutive Direct Reads)
dio_rd_form_min
(Set the Size of Well-Aligned Direct I/O Reads)
dio_rd_ill_min
(Set the Size of Misaligned Direct I/O Reads)
dio_szero
(Zero Uninitialized Areas of Sparse Files During Direct I/O)
dio_wr_consec
(Limit the Number of Consecutive Direct Writes)
dio_wr_form_min
(Set the Size of Well-Formed Direct I/O Writes)
dio_wr_ill_min
(Set the Size of Misaligned Direct I/O Writes)
diskvols
(Set/Clear Flags on Disk Volumes Used for Archiving)
dmr
(Enable Directed Mirror Reads of Software Mirrors)
dtrace
(Enable/Configure Tracing for SAM-QFS Daemons)
export
(Move Removable Media to the Robotic Library's Mailbox)
f
(Display File Systems Screen)
flush_behind
(Set the Flush-Behind Parameter)
forcedirectio
(Use Direct I/O by Default)
force_nfs_async
(Force Asynchronous NFS)
g
(Display Shared File System Clients)
h
(Display the Help Screen)
samu
Interface Controlssamu
Command Prompthwm_archive
(Start Archiving When the High Water Mark is Reached)
idle
(Idle Device)
import
(Move Removable Media from the Mailbox into the Robotic Library)
invalid
(Set the Invalidate-Cache Delay for a Multi-Reader File System)
l
(Display Utilization Information)
lease_timeo
(Set the Unused Lease Timeout for a Shared File System)
load
(Load a Cartridge into a Drive)
m
(Display the Mass Storage Status Screen)
maxallocsz
(Set the Maximum Allocation Size for a Shared File System)
maxpartial
(Set the Maximum Partial Release Size for the File System)
meta_timeo
(Set the Metadata Cache Timeout for a Shared File System)
mh_write
(Turn on Multi-Host Read/Write)
min_pool
(Set the Minimum Number of Shared File System Threads)
minallocsz
(Set the Minimum Allocation Size for a Shared File System)
mm_stripe
(Set the Metadata Stripe Width)
n
(Display the Staging Status Screen)
noabr
(Disable Application Based Recovery)
noalloc
(Disable Storage Allocation on a Device)
noatime
(Disable Access Time Updates for a File System)nodio_szero
(Do Not Zero Uninitialized Areas of Sparse Files with Direct I/O)
nodmr
(Disable Directed Mirror Reads of Software Mirrors)
noforcedirectio
(Do Not Use Direct I/O by Default)
noforce_nfs_async
(Do Not Force Asynchronous NFS)
nohwm_archive
(Do Not Start Archiving at the High Water Mark)
nomh_write
(Turn Off Multi-Host Read/Write)
norefresh_at_eof
(Do Not Refresh at EOF in a Multi-Reader File System)
noqwrite
(Disable Simultaneous Reads/Writes from Different Threads)
nosuid
(Mount a File System with setuid
Execution Disabled)
nosw_raid
(Turn Off Software RAID Mode)
notrace
(Disable File System Tracing)
o
(Display the Optical Disk Status Screen)
off
(Turn Off A Device)
on
(Turn On A Device)
open
(Open a Disk Storage Device for Reading)
p
(Display the Removable Media Load Requests Screen)
partial
(Set the Default Partial Release Size for the File System)
partial_stage
(Set Partial Stage-Ahead Point for the File System)
priority
(Set Priority in Load-Request Preview Queue)
qwrite
(Enable Simultaneous Reads/Writes to a File from Different Threads)
r
(Display the Removable Media Status Screen
rdlease
(Set the Read Lease Time for a Shared File System)
read
(Read Sectors On a Disk Storage Device)
readahead
(Set The Maximum Read-Ahead Parameter)
readonly
| ro
(Make Device Read Only)
refresh
(Set the Automatic Refresh Interval for the samu
Display)
refresh_at_eof
(Refresh at EOF in a Multi-Reader File System)
release
(Release Archived Data Files and Disable Allocation on a Device)
remove
(Move Data and Remove Equipment from a File System)
s
(Display Device Status Screen)
snap
(Save a Snapshot of the Current Screen to a File)
stage_flush_behind
(Set the Stage Flush Behind Size)
stage_n_window
(Size the Buffer for Reading Directly from Archival Media)
stclear
(Clear a Stage Request)
stidle
(Stop Staging as Soon as Possible)
stripe
(Set the Stripe Width for a File System)
strun
(Start Staging)
suid
(Mount a File System with setuid
Execution Enabled)
sw_raid
(Turn On Software RAID Mode)
sync_meta
(Synchronize File System Metadata)
t
(Display Tape Drive Status Screen)
thresh
(Set High and Low Watermarks)
trace
(Enable File System Tracing)
u
(Display Staging Queue Screen)
unavail
(Make a Device Unavailable to SAM-QFS)
unload
(Unload a Drive)
v
(Display Robot VSN Catalog Screen)
w
(Display the Pending Stage Queue Screen)
wr_throttle
(Set the Maximum Size of Outstanding Writes)
writebehind
(Set the Write-Behind Parameter)
wrlease
(Set the Write Lease Time for a Shared File System)
:C
(Display the Contents of Shared Memory at a Specified Address)
D
(Display Disk Volume Dictionary Screen)
F
(Display Optical Disk Label Screen)I
(Display Inode Information)
J
(Display the Shared Memory Segment for the Load-Request Preview Queue)
K
(Display Kernel Statistics)
L
(Display Shared Memory Tables and System Defaults)
M
(Display Raw Shared Memory)
N
(Display File System Parameters)
P
(Display Active Services)
R
(Display SAM-Remote Configuration Information)S
(Display Raw Sector Data)
T
(Display SCSI Sense Data for a Current or Specified Device)
U
(Display Device Table in Human-Readable Form)