Retrieve the Product Information from a Sun x86 Server

• At the command prompt, type the following:

  • On a Linux system:

    snmpwalk -v 2c -c public -M /usr/share/snmp/mibs/ -m ALL localhost sunHwMonProductGroup

  • On an Oracle Solaris 11.1 system:

    snmpwalk -v 2c -c public -M +/usr/lib/ssm_directory/lib/mibs/ -m ALL localhost sunHwMonProductGroup

    Where ssm_directory is either sun-ssm or ssm, depending on your version of Oracle Hardware Management Pack.

  • On an Oracle Solaris 10 system:

    snmpwalk -v 2c -c public -M +/opt/ssm_directory/lib/mibs/ -m ALL localhost sunHwMonProductGroup

    Where ssm_directory is either sun-ssm or ssm, depending on your version of Oracle Hardware Management Pack.

  You should see output similar to the following:

  SUN-HW-MONITORING-MIB::sunHwMonProductName.0 = STRING: SUN FIRE X4440

  SUN-HW-MONITORING-MIB::sunHwMonProductType.0 = INTEGER: rackmount(3)

  SUN-HW-MONITORING-MIB::sunHwMonProductPartNumber.0 = STRING: 602-4058-01

  SUN-HW-MONITORING-MIB::sunHwMonProductSerialNumber.0 = STRING: 0823QBU01C

  SUN-HW-MONITORING-MIB::sunHwMonProductManufacturer.0 = STRING: SUN MICROSYSTEMS

  SUN-HW-MONITORING-MIB::sunHwMonProductSlotNumber.0 = INTEGER: -1

  SUN-HW-MONITORING-MIB::sunHwMonProductUUID.0 = STRING: 080020FFFFFFFFFFFFFF00144FEDE5E0

  SUN-HW-MONITORING-MIB::sunHwMonProductBiosVersion.0 = STRING: S90_3B18

  ---

  Note -  On a Sun x86 rack mount server, the following line signifies that there is no slot number (nodef).

  sunHwMonProductSlotNumber.0 = INTEGER: -1

  This is expected behavior because slot numbers are relevant only to blade servers. Rackmount servers do not have slot numbers.

  ---