|
|
|
OXA_GENERIC Parameters for Marsha
To set the basic functionality parameters for your interface, go to Interface Configuration>Parameters. Select the group of parameters on the left side of the screen. The right side of the screen shows the list of parameters associated with that group. To modify a parameter, highlight it and press the Edit button. The edit screen will allow you to change the value. To see the entire description of a parameter, select the button next to the Description column.
Example: Screen shot example of Marsha parameters.
Parameter Name |
Parameter Values |
Parameter Description Direction of transmission where parameter applies. |
Recommended Setting |
|---|---|---|---|
ACTIVE COMMENTS NAME |
Character |
File Name for the active comments download file |
ACXXXXX.DAT (i.e.ACRESTZ.DAT) |
CLASS YN |
Y/N |
Enter 'Y' to use Class interface and 'N' not to use Class Interface |
Y |
CONNECT TIME |
Numeric |
Timeout for reconnection for the class IFC |
15 |
FTP DOWNLOAD DIR |
Directory path |
Directory on FTP server, where to look for files to be downloaded |
For path details, please check special user guide for Marsha |
FTP PASSWORD |
Character |
Password to be used to connect to the FTP Server |
enter password case sensitive |
FTP SERVER |
162.130.100.32 |
FTP Server Name where the files to be uploaded/downloaded |
For path details, please check special user guide for Marsha |
FTP TEMP DIR |
Directory path |
Directory on FTP server where temporary files are to be stored |
For path details, please check special user guide for Marsha |
FTP UPLOAD DIR |
Directory path |
Directory on FTP server, where the files are to be uploaded |
For path details, please check special user guide for Marsha |
FTP USER |
User name |
User Id to be used to connect to the FTP Server |
For path details, please check special user guide for Marsha |
HOST NAME |
Name or IP |
Marsha Host Name or IP Address |
For path details, please check special user guide for Marsha |
LOG DIR |
Directory path |
Directory where the log files will be kept |
enter directory path |
LOG REQ |
Y/N |
All warnings and errors will be logged if this is set to 'Y'. This will be useful for support. Recommended setting is 'N' |
N |
PORT |
Numeric |
Marsha TCP Port Number or Name |
5003 |
READ RETRIES |
Numeric |
Number of Retries for reading from the specified port |
20 |
RETRIES COUNT |
Numeric |
Timeout for retries |
60 |
WAIT TIME |
Numeric |
Idle time in seconds in case no import/export data is present |
30 |
WAIT TIME CLASS |
Numeric |
Idle time in seconds in case no Class data is present for import/export |
300 |
WAIT TIME REPROCESS |
Numeric |
Idle time in seconds in case no data is found to reprocess |
180 |
WARNING CODES |
Numeric |
Control Block Warning Codes |
00000002 |
WRITE RETRIES |
Numeric |
Number of Retries for writing to the specified port |
2 |
