|
|
|
| |
|
An attempt to allocate memory failed.
|
| |
|
|
|
|
Cannot load shared module <text>: <text>
|
| |
|
An attempt to load the listed shared library failed. The reason is noted in the error text.
|
| |
|
Verify that the shared library exists.
|
|
|
Cannot get symbol '<text>' in module '<text>'
|
| |
|
The listed symbol was not found in the listed shared module.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
No encoding type defined for <text>. No encoding done
|
| |
|
The gateway configuration file does not specify a TYPE parameter for the listed FOREIGN gateway or a DFLTTYPE parameter in the GLOBAL section.
|
| |
|
Correct the gateway configuration file.
|
|
|
Encoding type '<text>:<text>' for type '<text>' failed.
|
| |
|
Allocating a typed buffer for encoding output failed.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Decode failed due to allocation error
|
| |
|
The output data buffer was not created correctly with tpalloc( ).
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
No encoding type defined for <text>. No decoding done
|
| |
|
The Domain Gateway library software does not have an encoding type defined in shared memory for the listed gateway.
|
| |
|
Verify the TYPE parameter for the gateway in the gateway configuration file.
|
|
|
Decoding type <text>:<text> for type <text> failed
|
| |
|
The Domain Gateway library software detected an error while getting decoding information for the listed type, subtype, and remote type.
|
| |
|
Previous logged error messages should provide the exact reasons for the failure. Contact your Tuxedo System Technical Support.
|
|
|
GWICONFIG env var not found!
|
| |
|
Retrieving the environment variable GWICONFIG failed.
|
| |
|
Set and export the GWICONFIG environment variable.
|
|
|
<text> config file not found!
|
| |
|
The named configuration file cannot be found.
|
| |
|
Verify that the file which the GWICONFIG environment variable points to exists.
|
|
|
Parse of <text> failed, exiting
|
| |
|
An attempt to parse the gateway configuration file failed.
|
| |
|
Verify the format of the gateway configuration file.
|
|
|
<number> errors found while parsing <text>, exiting
|
| |
|
Errors occurred while parsing the gateway configuration file.
|
| |
|
Verify the format of the gateway configuration file
|
|
|
Dumping configuration to stdout
|
| |
|
The current configuration is dumped to the standard output.
|
| |
|
|
|
|
Sending error to <text>:\n\t<text>
|
| |
|
The error condition described is being sent to the listed gateway.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Invalid action detected <number>
|
| |
|
The Domain Gateway library software detected an invalid action while trying to encode a buffer.
|
| |
|
This is an internal error with no associated user action. If the error persists, contact your Tuxedo System Technical Support with the exact error message.
|
|
|
|
| |
|
The Domain Gateway library software detected an error encoding data.
|
| |
|
Previous logged error messages should provide the exact reasons for the failure. Contact your Tuxedo System Technical Support.
|
|
|
Invalid wrap switch index
|
| |
|
The wrap switch index in shared memory is not valid.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
|
| |
|
The buffer wrapping function returned an error.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
|
| |
|
The wrapping protocol in shared memory is not GWI_PROTOCOL.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
|
| |
|
The buffer unwrapping function returned an error.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Unable to obtain local service (<text>) information from shared memory
|
| |
|
Information about the local service could not be found in shared memory.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Request for unknown service '<text>' from <text>
|
| |
|
Information about the listed service could not be found in shared memory.
|
| |
|
Verify the DMCONFIG file and ensure dmloadcf has been run on it.
|
|
|
Reply received for invalid session
|
| |
|
The Domain Gateway received a reply for an invalid session.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Reply received for inactive session
|
| |
|
The Domain Gateway received a reply for an inactive session.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Unable to obtain remote service (<text>) information from shared memory
|
| |
|
Information about the remote service could not be found in shared memory.
|
| |
|
Verify the DMCONFIG file and insure dmloadcf has been run on it.
|
|
|
|
| |
|
The Domain Gateway library software detected an error while decoding a received message buffer.
|
| |
|
Previous logged error messages should provide the exact reasons for the failure. Contact your Tuxedo System Technical Support.
|
|
|
|
| |
|
The field name and its value in a fielded buffer are logged.
|
| |
|
|
|
|
|
| |
|
The field type and its value in a fielded buffer are logged.
|
| |
|
|
|
|
Cannot open <text>:<text>
|
| |
|
Could not find the listed view file.
|
| |
|
Verify the VIEWDIR and VIEWFILES environment variables.
|
|
|
FML incompatible field in <text>:<text>
|
| |
|
The listed view contains the packed decimal data type. Views containing this type cannot be used for FML-to-view or view-to-view conversions.
|
| |
|
Remove packed decimal fields from the input FML or view, or send the same view structure to the local gateway that is sent to the remote gateway.
|
|
|
tpalloc for <text> failed
|
| |
|
Allocation of an Tuxedo typed buffer failed.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Fvstof failed for <text>:<text>
|
| |
|
The conversion of a C structure to a fielded buffer failed.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
tpalloc for <text>:<text> failed
|
| |
|
Allocating a typed buffer for the listed view failed.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Unable to obtain network descriptor; error code = <number>
|
| |
|
This is an internal error code, indicating a network initialization failure.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Unable to determine RDOM for request
|
| |
|
This is an internal error code, indicating a shared memory lookup failure.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Unable to connect to <text>; return code <number>
|
| |
|
The gateway detected an error while trying to open a connection on a socket.
|
| |
|
Verify that the network address information for the desired FOREIGN entry is correct.
|
|
|
Connection failed to <text>
|
| |
|
The Domain Gateway library software detected an error while trying to connect to the listed gateway.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Unable to send service request
|
| |
|
The Domain Gateway library software detected an error while trying to send a message to the network.
|
| |
|
This is an internal error with no associated user action. If the error persists, contact your Tuxedo System Technical Support with the exact error message.
|
|
|
Unable to send service request \"<text>\"
|
| |
|
The Domain Gateway library software detected an error while trying to send a message to the network.
|
| |
|
This is an internal error with no associated user action. If the error persists, contact your Tuxedo System Technical Support with the exact error message.
|
|
|
Unable to get remote service information from shared memory
|
| |
|
Information about the remote service could not be found in shared memory.
|
| |
|
Verify the DMCONFIG file and insure dmloadcf has been run on it.
|
|
|
Can't get remote service name for <text>
|
| |
|
The remote service name for the listed service could not be found in shared memory.
|
| |
|
Verify the DMCONFIG file and insure dmloadcf has been run on it.
|
|
|
No remote service entry for <text>
|
| |
|
No remote service entry for the listed service was found in shared memory.
|
| |
|
Correct the gateway configuration file.
|
|
|
|
| |
|
The Domain Gateway library software was unable to suspend the action while trying to set up a network connection.
|
| |
|
This is an internal error with no associated user action. If the error persists, contact your Tuxedo System Technical Support with the exact error message.
|
|
|
CICS init string failed for <text>.
|
| |
|
The Domain Gateway library software detected an error while trying to send a CICS initialization string to the listed gateway.
|
| |
|
This is an internal error with no associated user action. If the error persists, contact your Tuxedo System Technical Support with the exact error message.
|
|
|
Connection <number> initialized to <text>, ID:\n\t<text>
|
| |
|
The Domain Gateway library software successfully initialized a connection to the gateway.
|
| |
|
|
|
|
Multiplex count for connection <number> is <number>
|
| |
|
The multiplex count for the listed connection is given.
|
| |
|
|
|
|
Listen port <number> (<text>) established
|
| |
|
The listen port for the gateway has been established.
|
| |
|
|
|
|
Cannot change action into msg_failure
|
| |
|
The action cannot be changed to msg_failure.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Cannot change action into msg_reply
|
| |
|
The action cannot be changed to msg_failure.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Unexpected action state <number>
|
| |
|
This message should never occur. The program code or defines are wrong if it does.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Conversation not found - closing connection
|
| |
|
The ID of the connection was not found in the shared memory conversation table.
|
| |
|
|
|
|
|
| |
|
Trying to create an action to time out a conversation failed.
|
| |
|
|
|
|
Cannot allocate appropriate array for poll
|
| |
|
The Domain Gateway library software was unable to allocate the pollfd array.
|
| |
|
This is an internal error with no associated user action. If the error persists, contact your Tuxedo System Technical Support with the exact error message.
|
|
|
Run-time environment setting failure
|
| |
|
The Domain Gateway library software was unable to initialize the run-time environment.
|
| |
|
Previous logged error messages should provide the exact reasons for the failure. Contact your Tuxedo System Technical Support.
|
|
|
No free listen structures available
|
| |
|
Obtaining a free listen structure failed.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Cannot listen for host <text>
|
| |
|
The Domain Gateway library software was unable to resolve the IP address of the listed gateway.
|
| |
|
Previous logged error messages should provide the exact reasons for the failure. Contact your Tuxedo System Technical Support.
|
|
|
Gateway fails to complete connection
|
| |
|
The Domain Gateway library software was unable to open a socket connection.
|
| |
|
Verify that the address of the remote host is configured correctly.
|
|
|
Unable to establish listen port <number> (<text>)
|
| |
|
The Domain Gateway library software was unable to establish a listen socket.
|
| |
|
Verify that the configured listen port is not in use by another process. Contact your Tuxedo System Technical Support.
|
|
|
Can't read CODEPAGE '<text>' for <text> DOMAIN <text>
|
| |
|
The codepage file specified in the DMCONFIG file cannot be opened.
|
| |
|
Verify that the specified file is available and that the file protections are set correctly.
|
|
|
<text> '<text>' not found in domain configuration
|
| |
|
A FOREIGN or NATIVE entry does not have a corresponding entry in the domain configuration ( dmconfig) file.
|
| |
|
Verify that each FOREIGN and NATIVE entry in the gwiconfig file has a corresponding entry in the dmconfig file.
|
|
|
|
| |
|
Creating a conversation switch in shared memory failed.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
|
| |
|
Creating a wrap switch in shared memory failed.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Couldn't load configuration
|
| |
|
The Domain Gateway library software was unable to load the configuration.
|
| |
|
Verify the format of the gateway configuration file.
|
|
|
No gateway defined in config file
|
| |
|
The gateway configuration file does not contain a gateway definition.
|
| |
|
Correct the gateway configuration file.
|
|
|
Couldn't find <text> gateway (GWINAME) in NATIVE section
|
| |
|
The listed gateway was not found in the NATIVE section of the gateway configuration file.
|
| |
|
Correct the gateway configuration file.
|
|
|
Couldn't find env var GWINAME. Cannot guess which gateway.
|
| |
|
The gateway configuration file contains more than one gateway entry and the environment variable GWINAME is not set.
|
| |
|
Set the GWINAME environment variable.
|
|
|
Couldn't find host name. Cannot guess gateway address.
|
| |
|
The Domain Gateway library software detected an error while trying to get the name of the current host.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Service <text> is SECURE, Tuxedo security disabled
|
| |
|
The listed service requires security, but Tuxedo security is disabled.
|
| |
|
Either turn on Tuxedo security with the SECURITY resource, or remove the SECURE parameter from the gateway configuration file for this service.
|
|
|
Network initialization fails; error code = <number>
|
| |
|
Initialization of the network protocol has failed.
|
| |
|
Verify that the underlying TCP product is installed and configured correctly.
|
|
|
Universal callback setup fails; error code = <number>
|
| |
|
This is an internal error code, indicating a library setup failure.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Unable to register protocol; error code = <number>
|
| |
|
This is an internal error code, indicating a library setup failure.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Unable to set network device; error code = <number>
|
| |
|
The configured network device cannot be found.
|
| |
|
Verify that the NWDEVICE field in the LOCAL section of the GWICONFIG file is correct (usually /dev/tcp).
|
|
|
|
| |
|
Could not convert the remote internet address to a binary address.
|
| |
|
Previous logged error messages should provide the exact reasons for the failure. Contact your Tuxedo System Technical Support.
|
|
|
Accepted new connection <number> from <text>
|
| |
|
A new connection from the remote gateway has been accepted.
|
| |
|
|
|
|
Poll returned error (num_cnx=<number>)
|
| |
|
The Domain Gateway library software detected an error while polling the connection for events.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
No free sessions available
|
| |
|
The Domain Gateway library software was unable to allocate shared memory for a new session structure.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Unable to get new action: gpnd <number>
|
| |
|
This is an internal error, indicating that the Domain Gateway is unable to allocate a new action.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Invalid ses_idx <number> for act <number>
|
| |
|
The action structure references an invalid session index.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Unable to allocate a receive buffer
|
| |
|
The Domain Gateway is unable to allocate memory for a receive buffer.
|
| |
|
Verify that system memory requirements are met. If problems persist, contact your Tuxedo System Technical Support.
|
|
|
Deleting late reply from local service '<text>'
|
| |
|
A late reply has arrived from a Tuxedo service. Because the request has already timed out, the reply is discarded.
|
| |
|
No action is required. If an excessive number of timeouts occur, adjustments may be needed in the configuration.
|
|
|
Error message from <text>:\n\tTuxedo code <number> (<text>):\n\t<text>
|
| |
|
Received an error message from the remote gateway.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Late response received for freed session <number>/<number>
|
| |
|
Received a response on a file descriptor which had timed out.
|
| |
|
|
|
|
|
| |
|
Received a message on a session with no associated action.
|
| |
|
|
|
|
Data conversion failed for local request '<text>'
|
| |
|
The Domain Gateway library software detected an error while trying to decode a message.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Unexpected diagnostic <number> returned from server
|
| |
|
An unexpected diagnostic flag was returned from the server.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Data conversion failed for local service '<text>'
|
| |
|
The Domain Gateway library software detected an error while trying to encode a message.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Connection <number> initialized from <text>
|
| |
|
The Domain Gateway library software received a connection request from the remote gateway.
|
| |
|
|
|
|
Unable to identify local service, rname '<text>'
|
| |
|
The service requested by the listed remote service was not found in shared memory.
|
| |
|
Verify the DMCONFIG file and insure dmloadcf has been run on it.
|
|
|
Unable to map local service RNAME <text>
|
| |
|
The service requested by the listed service name was not found in shared memory.
|
| |
|
Verify the DMCONFIG file and insure dmloadcf has been run on it.
|
|
|
Unable to identify user <text>
|
| |
|
The listed user is not authorized for the requested service.
|
| |
|
Verify the tpusr file in APPDIR.
|
|
|
Protocol error: server cannot use GWI_OP_DISCON
|
| |
|
A remote service is sending a disconnect.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Invalid opcode on receive
|
| |
|
The Domain Gateway library software received an invalid opcode.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Closing connection <number>
|
| |
|
The listed connection is being closed.
|
| |
|
|
|
|
gwi_mk_error called with bad act_idx!
|
| |
|
The Domain Gateway library software detected that an error occurred between a send and receive. The connection closes.
|
| |
|
|
|
|
Too many unrecoverable errors occurred - deleting action
|
| |
|
The Domain Gateway library software detected more than 2 errors while trying to complete the action.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Unrecoverable error occurred on send of reply request - deleting action
|
| |
|
Cannot send a reply to a call made with TPNOREPLY.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Local request '<text>' timed out, returning error response
|
| |
|
The request for the local service timed out.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Deleting timed out session index %d for connection %d
|
| |
|
The request for the local service timed out.
|
| |
|
|
|
|
Local request '<text>' failed, returning error response
|
| |
|
The request for the local service failed.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Error on receive from <text>
|
| |
|
The Domain Gateway library software detected an error when receiving a request from a remote gateway.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Unrecoverable error occurred on unknown receipt(2) - deleting action
|
| |
|
The current action has no associated session.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
No FOREIGN entry for REMOTE_DOMAIN '<text>'
|
| |
|
There is no FOREIGN entry in the GWICONFIG file corresponding to the specified REMOTE_DOMAIN.
|
| |
|
Create a FOREIGN entry in the GWICONFIG file for each REMOTE_DOMAIN that is available through the gateway.
|
|
|
Unrecoverable error occurred - deleting GWEV_MSG_FAILURE action (type <number>)
|
| |
|
The Domain Gateway library software detected an unrecoverable error.
|
| |
|
Previous logged error messages should provide more information. Contact your Tuxedo System Technical Support.
|
|
|
Unrecoverable error occurred - changing action (type <number>) into GWEV_MSG_FAILURE
|
| |
|
The Domain Gateway library software detected an unrecoverable error.
|
| |
|
Previous logged error messages should provide more information. Contact your Tuxedo System Technical Support.
|
|
|
Unrecoverable error occurred - deleting action (type <number>)
|
| |
|
The Domain Gateway library software detected an unrecoverable error.
|
| |
|
Previous logged error messages should provide more information. Contact your Tuxedo System Technical Support.
|
|
|
|
| |
|
The action with the given request ID was not found in shared memory.
|
| |
|
|
|
|
|
| |
|
The session with the given conversation ID was not found in shared memory.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Invalid network address <<text>>
|
| |
|
The given network address is not valid.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Invalid host name <<text>>
|
| |
|
Could not get the network address for the listed host.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Bad ip adress format <<text>>
|
| |
|
The format of the listed ip address is invalid.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Input string too long <<text>>
|
| |
|
The address is too long to fit in the memory allocated for it.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Timeout on remote service <text> on <text>
|
| |
|
The Domain Gateway library software detected a timeout on the listed remote service.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Timeout on local service <text>, returning error to <text>
|
| |
|
The Domain Gateway library software detected a timeout on the listed local service.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Connect time-out on connection <number> to <text>
|
| |
|
The Domain Gateway library software detected a timeout while attempting to connect to the remote gateway.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Idle time-out on connection <number> to <text>
|
| |
|
The Domain Gateway library software detected a timeout on the listed connection to the remote gateway.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
Parse error: <text> line <number> column <number> (after <<text>>) at <<text>>
|
| |
|
The Domain Gateway library software encountered an error while parsing the gateway configuration file.
|
| |
|
Correct the gateway configuration file.
|
|
|
|
| |
|
There was no NWDEVICE specified in the gateway configuration file.
|
| |
|
Correct the gateway configuration file.
|
|
|
NATIVE name <text> already in use
|
| |
|
The listed gateway name is specified more than once in the NATIVE section of the gateway configuration file.
|
| |
|
Correct the gateway configuration file.
|
|
|
Unreasonable POLL_TIME <number> ignored for NATIVE <text>
|
| |
|
The gateway configuration file specifies a poll time which is less than 100,000 or greater than 10,000,000.
|
| |
|
No action required. The poll time is set to 250,000.
|
|
|
REMOTE_SERVICE <text> has no OUTREQ_TIME, no default in GLOBAL
|
| |
|
The gateway configuration file does not have an OUTREQ_TIME specified for a remote service.
|
| |
|
Correct the gateway configuration file.
|
|
|
FOREIGN name <text> already in use
|
| |
|
The listed gateway name is specified more than once in the FOREIGN section of the gateway configuration file.
|
| |
|
Correct the gateway configuration file.
|
|
|
Missing mandatory TYPE param for FOREIGN <text>
|
| |
|
The gateway configuration file does not have a TYPE parameter for the listed gateway.
|
| |
|
Correct the gateway configuration file.
|
|
|
Missing mandatory WRAP param for FOREIGN <text>
|
| |
|
The gateway configuration file does not have a WRAP parameter for the listed gateway.
|
| |
|
Correct the gateway configuration file.
|
|
|
Missing mandatory IP_ADDR param for FOREIGN <text>
|
| |
|
The gateway configuration file does not have an IP_ADDR parameter for the listed gateway.
|
| |
|
Correct the gateway configuration file.
|
|
|
LOCAL_SERVICE name <text> already in use
|
| |
|
The listed service name is specified more than once in the LOCAL_SERVICE section of the gateway configuration file.
|
| |
|
Correct the gateway configuration file.
|
|
|
REMOTE_SERVICE name <text> already in use
|
| |
|
The listed service name is specified more than once in the REMOTE_SERVICE section of the gateway configuration file.
|
| |
|
Correct the gateway configuration file.
|
|
|
Mandatory <text> section missing
|
| |
|
The gateway configuration file must contain the GLOBAL, FOREIGN, NATIVE, LOCAL_SERVICES, and REMOTE_SERVICES sections.
|
| |
|
Correct the gateway configuration file.
|
|
|
|
| |
|
The gateway configuration file contains multiple entries for the listed section.
|
| |
|
Correct the gateway configuration file.
|
|
|
Section <text> out of order
|
| |
|
The listed section is not in the proper order in the gateway configuration file.
|
| |
|
Correct the gateway configuration file.
|
|
|
Section order must be *GLOBAL then *NATIVE/*FOREIGN then *LOCAL_SERVICES/*REMOTE_SERVICES
|
| |
|
The gateway configuration file must have the following order of sections: GLOBAL, NATIVE/FOREIGN, LOCAL_SERVICES/REMOTE_SERVICES.
|
| |
|
|
|
|
Bad subtype <text> truncated to <number> characters
|
| |
|
The gateway configuration file specifies a subtype name which is too long.
|
| |
|
Correct the gateway configuration file.
|
|
|
Bad type <text> truncated to <number> characters
|
| |
|
The gateway configuration file specifies a type name which is too long.
|
| |
|
Correct the gateway configuration file.
|
|
|
SECURE= accepts Y or N, not <text>
|
| |
|
The gateway configuration file contains an invalid entry for the SECURE parameter.
|
| |
|
Correct the gateway configuration file.
|
|
|
DSECURITY= accepts Y or N, not <parameter>
|
| |
|
The gateway configuration file contains an invalid entry for the DSECURITY parameter.
|
| |
|
Correct the gateway configuration file.
|
|
|
DUMP= accepts Y or N, not <text>
|
| |
|
The gateway configuration file contains an invalid entry for the DUMP parameter.
|
| |
|
Correct the gateway configuration file.
|
|
|
CONNSYNC= accepts Y or N, not <text>
|
| |
|
The gateway configuration file contains an invalid entry for the CONNSYNC parameter.
|
| |
|
Correct the gateway configuration file.
|
|
|
CICS= accepts Y or N, not <text>
|
| |
|
The gateway configuration file contains an invalid entry for the CICS parameter.
|
| |
|
Correct the gateway configuration file.
|
|
|
Remove obsolete line in <text> : \"REPLY = <text>\"
|
| |
|
The gateway configuration file contains a REPLY parameter, which is obsolete.
|
| |
|
Remove the REPLY parameter from the gateway configuration file.
|
|
|
CONV=Y, conversational mode not supported
|
| |
|
The gateway configuration file specifies CONV=Y for a local service. This is currently not supported.
|
| |
|
Correct the gateway configuration file.
|
|
|
CONV= accepts Y or N, not <text>
|
| |
|
The gateway configuration file contains an invalid entry for the CONV parameter.
|
| |
|
Correct the gateway configuration file.
|
|
|
|
| |
|
The unwrapping protocol in shared memory is not GWI_PROTOCOL.
|
| |
|
Contact your Tuxedo System Technical Support.
|
|
|
External encode/decode enabled, type '<text>'
|
| |
|
The external encoding command line option has been specified on the gateway, with the given encoding type.
|
| |
|
|
|
|
External encode/decode service returned error:\n\tTuxedo code <number> (<text>)
|
| |
|
An external encode or decode request has resulted in an error. The Tuxedo code and a descriptive message are supplied.
|
| |
|
Verify that the encode/decode service is running and that the DMCONFIG and GWICONFIG files are configured properly.
|
|
|
TCP-IP Listener Error Received: <text>
|
| |
|
An error has been reported by the TCP/IP listener on the remote system.
|
| |
|
Examine the logs on the remote system to determine the cause of the TCP/IP failure.
|
|
|
Mainframe buffer length checking disabled
|
| |
|
The gateway has been configured to allow copybook buffers from the remote host that are not as large as the desired VIEW buffer.
|
| |
|
|
|
|
Mainframe padding disabled
|
| |
|
The gateway has been configured to not align copybook members sent to and received from the remote host.
|
| |
|
|
|
|
|
|
| |
|
The gateway has been configured to log each request to standard error output.
|
| |
|
|
|
|
CODPEPAGE ‘<Code page name>’ for ‘LOCAL’ DOMAIN <Domain name>
|
| |
|
This displays the code page used by the Local Domain.
|
| |
|
|
|
|
CODPEPAGE ‘<Code page name>’ for ‘REMOTE’ DOMAIN <Domain name>
|
| |
|
This displays the code page used by the Remote Domain.
|
| |
|
|
