이 절차에 따라 현재 실행 레벨 0에 있는 시스템을 실행 레벨 3으로 부트할 수 있습니다. 이 절차에 포함된 정보 중 SPARC 또는 x86 플랫폼에만 적용되는 내용은 별도로 언급됩니다.
# init 0
ok boot
# reboot
부트 프로세스에 따라 일련의 시작 메시지가 표시되고 시스템이 실행 레벨 3으로 설정됩니다. 자세한 내용은 boot(1M) 및 reboot(1M) 매뉴얼 페이지를 참조하십시오.
부트 프로세스가 성공적으로 완료되면 로그인 프롬프트가 표시됩니다.
hostname console login:
다음 예에서는 부트 프로세스가 시작된 후 SPARC 기반 시스템을 실행 레벨 3으로 부트할 때 표시되는 메시지를 보여 줍니다.
ok boot Probing system devices Probing memory ChassisSerialNumber FN62030249 Probing I/O buses . . . . OpenBoot 4.30.4.a, 8192 MB memory installed, Serial #51944031. Ethernet address 0:3:ba:18:9a:5f, Host ID: 83189a5f. Rebooting with command: boot Boot device: /pci@1c,600000/scsi@2/disk@0,0:a File and args: SunOS Release 5.11 Version 11.2 64-bit Copyright (c) 1983, 2014, Oracle and/or its affiliates. All rights reserved. misc/forthdebug (455673 bytes) loaded Hardware watchdog enabled Hostname: portia-123 NIS domain name is solaris.example.com portia-123 console login: NIS domain name is solaris.example.com예 4-13 x86: 시스템을 다중 사용자 상태(실행 레벨 3)로 부트
다음 예에서는 부트 프로세스가 시작된 후 x86 기반 시스템을 실행 레벨 3으로 부트할 때 표시되는 메시지를 보여 줍니다. 이 릴리스에서는 빠른 재부트 기능이 기본적으로 설정되어 있으므로(x86 플랫폼의 경우) reboot 명령으로 시스템을 부트하면 시스템의 빠른 재부트가 시작됩니다. 즉, BIOS 또는 UEFI 펌웨어가 무시됩니다. 또한 시스템 부트 중 GRUB 메뉴가 표시되지 않습니다. 시스템 펌웨어에 액세스하거나 부트 시 GRUB 메뉴를 편집해야 할 경우 –p 옵션과 함께 reboot 명령을 사용하십시오. 빠른 재부트가 사용으로 설정된 시스템의 표준 재부트 시작을 참조하십시오.
~# reboot Apr 23 13:30:29 system-04 reboot: initiated by ... on /dev/console Terminated system-04% updating /platform/i86pc/boot_archive updating /platform/i86pc/amd64/boot_archive system-04 console login: syncing file systems... done SunOS Release 5.11 Version 11.2 64-bit Copyright (c) 1983, 2014, Oracle and/or its affiliates. All rights reserved. Hostname: system-04 system-04 console login: <username> Password: xxxxxx Last login: Mon Apr 23 11:06:05 on console Oracle Corporation SunOS 5.11 11.2 July 2014 # who -r run-level 3 Apr 23 13:31 3 0 S