Addresses configuration elements

Table 1 describes the fields on the Addresses View, Insert, and Edit pages. Data Input Notes apply only to the Insert and Edit pages; the View page is read-only.

Addresses Configuration Elements
Field	Description	Data Input Notes
View pages
Table Name	Address Table name	N/A
Address	Address of destination	N/A
Entry Type	Address type (Individual or Range)	N/A
Routing Entity	Routing Entity type	N/A
Individual Address	Specific address	N/A
Start Address	Starting address of the Range	N/A
End Address	Ending address of the Range	N/A
Destination	Destination of the Address	N/A
Insert and Edit pages
Routing Entity Type	Routing Entity type	Format: Pulldown list Range: IMSI IMSISDN IMPI IMPU IPv4 IPv6 Prefix UNSIGNED16
Table Name	Address Table name	Format: Pulldown list Range: Available user-configured address table names associated to the selected Routing Entity Type
Address Type	Type of address for the Routing Entity Type	Format: Radio buttons Range: Range or Individual Address
Start Address	Starting address for an Address Range This field is required when Range is selected as Address Type. If Address is an IPv6-prefix, the prefix length must be entered in the IPv6 Prefix length field.	Format: Text box Range: End Address must be greater than Start Address. Routing Entity Address: IMSI: 15 digit string MSISDN: 3-14 digit string IMPI: 15 digit string IMPU: 3-15 digit string IPv4 Address: a 15 character string; quad-dotted format; valid characters are numeric (0–9) and dot (.); both compressed and expanded form are supported; for example: `192.168.1.15` or `192.168.001.015` IPv6-Prefix Address: Hexadecimal value; up to 39 characters; valid alphanumeric characters (0-9, A-F, a-f) and colon (:); both compressed and expanded form are supported; for example: `1:::2` or `0001:0000:0000:0000: 0000:0000:0000:0002` Note: If this IPv6 address portion of the IPv6-prefix address is expressed in binary form (converting hexadecimal digits to bits), then no bit that is set (value=1) can be at an index that is greater than the configured IPv6 Prefix length. For example: `0001:0001::` for prefix length 28 is invalid as the 32nd bit is set. In addition, trailing zeros (0) can be dropped in this IPv6 address portion of the IPv6-prefix address but not the leading zeros (0); for example: `8::` for prefix length 1 is invalid because `8::` is treated as `0008::` UNSIGNED16: Hexadecimal value; valid alphanumeric characters (0-9, A-F, a-f); for example: `512`, `20`, `40`, `AA`, `50A`, `FFFF`
End Address	Ending address for an Address Range This field is required when Range is selected as Address Type. If Address is an IPv6-prefix, the prefix length must be entered in the IPv6 Prefix length field.
Address	Specific address This field is enabled and required when Individual Address is selected as Address Type. If Address is an IPv6-prefix, the prefix length must be entered in the IPv6 Prefix length field.
IPv6 Prefix length	Prefix length of an IPv6-prefix address; specifies how many of the leftmost contiguous bits of the address comprise the prefix. This field is enabled and required when IPv6 Prefix is selected as Routing Entity Type.	Format: Text box; numeric Range: 1–128
Destination	Destination of the Address	Format: Pulldown list Range: Available user-configured destinations