Table 1 describes the information on the SS7/Sigtran > Configuration > Routes pages. Data Input Notes apply only to the Insert and Edit pages.
| Element (* indicates required field) | Description | Data Input Notes |
|---|---|---|
| * Signaling Network Element Name | Identifies the Signaling Network Element to which the route is being added. | View-only |
| * SS7 Domain | The SS7 domain of the selected Remote Signaling Point. | Format: Pulldown list Range: ANSI, ITUN - ITU National, ITUI - ITU International, ITU National 24-bit Point Code Note: MD-IWF does not support ITUN24 - ITU National 24-bit point codes.
|
| * Remote Point Code |
The point code configured in the remote signaling point that identifies the destination of this route |
Format: Pulldown list Range: Configured Remote Signaling Points associated with the selected SS7 Domain. |
| * Link Set | The Link Set to be used by this route. The choice of Link Set implies the LSP of the Route. |
Format: Pulldown list Range: Configured Link Sets from the selected Remote Point Code domain. |
| Adjacent Point Code | The point code configured in the Adjacent RSP being used by the selected Link Set. | This field is view-only. The field is populated automatically when a Link Set is selected. |
| * Relative Cost | The relative cost assigned to this route. Lower cost routes are preferred over higher cost routes. |
Format: Text box; numeric Default: 20 Range: 0 - 99 |
| Route Name | An optional name that uniquely identifies the route. The name is case sensitive. |
Format: Valid characters are alphanumeric and underscore. Must contain at least one alpha and must not start with a digit. Range: A 32-character string. |