Racked Systems

When requesting racked Oracle FS Systems, customers order all of the components for the system. The system is mounted and cabled inside the rack at the factory. The manufacturing team then ships the fully-assembled system to the customer site. Racked systems can weigh up to 1800 pounds due to the additional weight of the components, cables, and the pallet.

The following figure shows an example of a racked Oracle FS System:

Figure 1 Racked Oracle FS System  

Legend

1 Controllers

2 Pilots

3 MaxRep Replication Engines (optional)

4 DE2-24P Drive Enclosure (locations may vary)

5 DE2-24C Drive Enclosure (locations may vary)

Oracle FS Systems that use the X5-2 Pilots and which have a gap of one rack unit (RU) or more because there is no component chassis installed below the bottom Pilot node might have a 1 RU cable trough (PN: 7098533) installed directly below the bottom Pilot. The cable trough provides support to the bottom Pilot during transportation to the customer’s facility and can be removed or left in place after the racked system is installed at the customer data center.

The following diagram shows an Oracle FS System configuration with a cable trough that is located at RU 20 in the rack.

Figure 2 Cable trough location in the Oracle FS System  

Legend

1 Cable trough long lip that is secured under the bottom Pilot

2 M6 cage nuts and M6 Phillips screws that secure the cable trough

3 Trough section that faces the back of the rack

4 Cable trough