This chapter contains these topics:
Section 62.8, "General Liability Insurance Register (P063651),"
Section 62.10, "Wage Attachment History Report by Payee (P06344),"
Section 62.16, "Employee Profile Data - Copy/Move (P080840),"
Section 62.17, "Initialize History - Include all Active EE (P080810),"
Section 62.19, "Recalculate Contract/Calendar Salary (P08936)."
Processing Option | Processing Options Requiring Further Description |
---|---|
1. Enter '1' to display Tip Information.
'0' is the default and will not display Tip Information. |
Processing Option | Processing Options Requiring Further Description |
---|---|
1. Enter 'Y' if you wish to print the full address of the business units.
(Default value is 'N') |
|
2. Enter 'Y' if you wish to print the 'Tip Information' for the business units.
(Default value is 'N') |
Processing Option | Processing Options Requiring Further Description |
---|---|
1. Enter the Pay Cycle Code desired for report.
Default of blanks is all codes. |
|
2. Enter the year desired for the report.
Default of blanks is all years. i.e. 2014, 2015, 2016, 2017, etc. |
Processing Option | Processing Options Requiring Further Description |
---|---|
PAYROLL REGISTER PRINT OPTIONS: | |
1. Enter 'Y' to print Employee Address.
Default of blank will not print Addr. |
|
2. Enter Employee Identification option.
blank = Address book & SSN 2 = Social Security Number Only 3 = Additional EE Number & SSN 4 = Address book Only |
|
Hide Paycheck Transparency Weekly Detail Stub Lines
Default if blank is show weekly detail stub lines 1 = Hide Weekly Detail |
Processing Option | Processing Options Requiring Further Description |
---|---|
Enter Employee Number you wish to print:
A = Address Book Number S = Social Security Number O = Third Employee Number |
|
Enter the Maximum Net Pay:
Default is (10,000) |
Processing Option | Processing Options Requiring Further Description |
---|---|
For weekly employees enter
minimum hours: maximum hours: For biweekly employees enter minimum hours: maximum hours: For semimonthly employees enter minimum hours: maximum hours: For monthly employees enter minimum hours: maximum hours: Enter the maximum allowable pay rate: |
|
Enter the minimum allowable pay rate:
Enter the minimum allowable Vacation hours available: Enter the minimum allowable Sick hours available: Enter 'Y' to print additional Time Card data: |
Processing Option | Processing Options Requiring Further Description |
---|---|
Which Employee No. do you wish to appear on the report:
A - Address Book S - Social Security No. O - Third Employee No. |
Processing Option | Processing Options Requiring Further Description |
---|---|
Which Employee No. do you wish to appear on the report:
A - Address Book S - Social Security No. O - Third Employee No. |
Processing Option | Processing Options Requiring Further Description |
---|---|
Select the Employee Number to print.
A - Address Book Number S - Social Security Number O - Third Employee Number Print the payee's address. (Y/N) |
Processing Option | Processing Options Requiring Further Description |
---|---|
1. Enter the sequence you wish to print.
Employee No. - blank Payee Number - 0 Obligee No. - 1 |
|
2. Enter the type of Wage Attachments to be printed.
All Types - blank Garnishments - G Tax Levies - L Loan Payments - K Child Support - C |
|
3. Select a '1' if you wish to print detail.
(Yes = 1) Leave blank for No. |
|
4. Enter a '1' if you wish to print 'Ledger' Trans. |
Processing Option | Processing Options Requiring Further Description |
---|---|
1) Enter type of Time Cards that you wish to print:
L = Labor Time Cards R = Recharge Time Cards E = Equipment Time Cards 2) If 'L', enter Employee Number you wish to print: A = Address Book Number S = Social Security Number O = Third Employee Number 3) Print the General Ledgers Account Number: (Y/N) |
Processing Option | Processing Options Requiring Further Description |
---|---|
CHECK PRINTING OPTIONS: | |
1. Enter the program name that translates check amounts from numbers to words.
(See User Defined Codes, system code 98, record type "CT" for program numbers.) |
|
2. Enter 'N' to OMIT printing of company name and address on payroll checks.
Enter 'Y' to print company name only. Enter 'A' to print company name and address. (Default of blank will OMIT printing of company name or address.) |
|
3. Enter company number to use for printing a single company's name and (optionally) address.
(Default of blank will use the employee's Home Company to fulfill processing option 2 above's print instructions.) |
|
4. Enter Employee Number Identification option:
blank = Address book No. 2 = Social Security No. 3 = Third Employee No. |
|
5. Enter the value 'Y' to only print the last (4) position of the Employee SSN number on the Check. The remaining positions will be loaded with the value 'X'.
Example" 123456789 will display as XXXXX6789. Default value will be "N". |
Processing Option | Processing Options Requiring Further Description |
---|---|
AUTO DEPOSIT ADVICE PRINTING OPTIONS: | |
1. Enter 'N' to OMIT printing of company name and address on payroll checks.
Enter 'Y' to print company name only. Enter 'A' to print company name and address. (Default of blank will OMIT printing of company name or address.) |
|
2. Enter company number to use for printing a single company's name and (optionally) address.
(Default of blank will use the employee's Home Company.) |
|
3. Enter Employee Number Identification option:
blank = Address book No. 2 = Social Security No. 3 = Third Employee No. |
|
4. Select option #4 to only print the last four digits of employee bank account number on Auto Deposit Check Stub.
Example: 12345678 will print ****5678 Enter value Y = Yes blanks = No Default will be blanks = No. |
|
5. Enter the value "Y" to only print the last (4) Positions of the Employee SSN number on the check. The remaining positions will be loaded with the value "X".
Example '123456789' will display as XXXXX6789 Default option value will be 'N' |
Processing Option | Processing Options Requiring Further Description |
---|---|
CASH VOUCHER PRINTING OPTIONS: | |
1. Enter 'N' to OMIT printing of company name and address on payroll checks.
Enter 'Y' to print company name only. Enter 'A' to print company name and address. (Default of blank will OMIT printing of company name or address.) |
|
2. Enter company number to use for printing a single company's name and (optionally) address.
(Default of blank will use the employee's Home Company.) |
|
3. Enter Employee Number Identification option:
blank = Address book No. 2 = Social Security No. 3 = Third Employee No. |
Processing Option | Processing Options Requiring Further Description |
---|---|
PRINT CONTROL OPTIONS: | |
1. Enter '1' to print employee name on the Net Pay Instr. Register.
Default of blank will NOT print name. |
|
2. Enter Employee Number to print option
A = Address Book S = Social Security Number O = Third Employee Number Default of blank will use Address Book number. |
|
3. Enter 'Y' to print full address.
Default of blank will NOT print address. |
|
4. Enter 'Y' to print individual account deposits for auto deposits.
Default of blank will NOT print individual deposits. |
Processing Option | Processing Options Requiring Further Description |
---|---|
1. Enter the Type of Data the information will be copied FROM. | |
2. Enter the Type of Data the information will be copied TO. | |
3. Enter '1' if you want to delete the Original FROM data after copying.
(Default of blank will copy without deleting the Original FROM Data). |
|
4. Enter '1' if you want to overwrite the existing TO rcds with the FROM information.
(Default of Blank will not overwrite existing TO rcds). |
Processing Option | Processing Options Requiring Further Description |
---|---|
1. Enter a date to be used as the Effective Date for all history records.
Default of blank will use the date when each employee record was last changed. |
When you run the initialize program, JD Edwards World recommends that you enter an effective date in this processing option. The effective date should be a day prior to the date of your first date for reporting turnover. The system considers employees active as of the initialize effective date. |
2. Choose what files to initialize given the choices below:
H = Initialize History only T = Initialize Turnover only B = Initialize History and Turnover |
|
3. To clear records from the indicated file(s) before initialization, enter one of the following values:
1 = Clear the entire selected file(s) 2 = Clear History/Turnover records for the selected employees only Default of blank will not clear any records. |
|
4. Enter a change reason for initial turnover and history records. A blank will default a change reason of'001' New Hire for turnover records and the window value for the history records.
(F1 will display allowed values.) |
Enter a numeric change reason code in this processing option. |
Processing Option | Processing Options Requiring Further Description |
---|---|
1. Enter a '1' if you would like Saturday and Sunday to be included as a work day with a Day Value of 1.0. | |
2. If JD Edwards payroll is installed enter the last payroll period end date.
This is used to prevent calendar changes on days that have already been paid which would cause a loss of data integrity. If left blank the system date will be used. |
|
3. Enter the version of form P08936 to use when Recalculate Contract/Calendar Salary (P08936) is executed. |
Processing Option | Processing Options Requiring Further Description |
---|---|
1. Enter the Contract/Calendar to process. | |
2. If switching the employees attached to the Calendar entered in 1, enter the name of the new Calendar. | |
3. Enter the number of periods left to pay. | |
4. Enter a '2' to perform the file updates.
Leave mode as '1' to print a proof report. |
|
5. Enter a '1' to change retrieve salary paid before change. This must be blank if switching calendars. | |
6. If a To Calendar (PO number 2) is not entered an effective date may be entered. Enter an effective date if you want the effective date to be greater than the calendar start date.
See the help text for more info. |
You can enter an effective date only if you are not transferring employee records to a new contract calendar. The effective date that you enter must be greater than the start date for the contract calendar. If you enter an effective date that is less than the start date for the calendar, the system uses the calendar start date as the effective date. If you leave this processing option blank, the system uses either the system date or the start date for the calendar. whichever is greater. |
7. Enter the change reason. | |
8. Enter a '1' to change all attached calendars to have a record type of 'O' for omitted. |