This chapter contains these topics:
| Processing Option | Processing Options Requiring Further Description |
|---|---|
| Enter the value to be defaulted into the following fields: | |
| Unit of measure | |
| Version of Dispatcher Workbench to execute.
(If blank, ZJDE0001 will be used) |
Dispatcher Workbench (P49300) |
| Processing Option | Processing Options Requiring Further Description |
|---|---|
| SCREEN DEFAULTS: | |
| 1. Enter the value to be used for action code upon entry to the program.
(Default is 'I'.) |
|
| 2. Enter a 'Y' or 'N' to allow display of the driver field in the video header.
(Default is 'Y'.) |
|
| VIDEO HEADER FIELD DEFAULTS:
Enter the default screen values for adding a trip: |
|
| 3. Volume unit of measure | |
| 4. Weight unit of measure | |
| 5. Load date:
Enter the number of workdays to add to the current date to obtain the default load date. OR Enter a default load date. If both are blank, the default load date will be the current date. |
|
| 6. Disposition Code | |
| 7. Next Depot | |
| 8. Trip Type | |
| TRIP STATUS DEFAULTS:
Enter the trip status defaults. |
|
| 9. Initial trip status | |
| 10. Pending trip status | |
| 11. Approved trip status | |
| 12. Protected trip status | |
| SALES ORDER STATUS DEFAULTS: | |
| 13. Enter the override next status for lines approved on a bulk trip. | |
| 14. Enter the override next status for lines approved on a packed trip. | |
| 15. Enter the range of valid status codes for adding sales order detail lines to a trip.
Begin End |
|
| 16. Enter the value to fill the next status in the sales orders when a trip is unapproved. | |
| DEFAULT DREAM WRITER VERSIONS:
Enter the DREAM Writer version for each program. If left blank, the system uses ZJDE0001. |
|
| 17. Connected Vehicles (P49025) | |
| 18. Dispatcher's Workbench (P49300) | |
| 19. Vehicle Registration Window (P49310W) | |
| 20. Order Line Adjustments (XT4999) | |
| 21. Download Data Queue Interface (P49570) | |
| GANTRY DEFAULTS: | |
| 22. If you are using an automated gantry, enter '1' to automatically download approved and unapproved trips.
If left blank, the system will not automatically download trips. |
|
| SINGLE ORDERS PER COMPARTMENT FLAG: | |
| 23. Enter '1' to assign order quantities that exactly match the capacity of the compartments on vehicles that do not allow multiple orders per compartment.
Blank is the default which will assign order quantities whether or not they exactly match the capacity of the compartments. |
|
| DEFAULT TANK TEMPERATURE/DENSITY FLAG: | |
| 24. Enter '1' to use a linear conversion of volume and weight.
' ' is the default, and will use default tank temperature and density to convert volume and weight. |
|
| REVIEW DEPOT RESOURCE CAPACITY: | |
| 25. Enter '1' to generate a warning error message if trip will exceed the capacity.
Enter '2' to generate a 'hard' error. Default is ' ' and does not check depot resource capacity. |
|
| COMPARTMENT FIELD SIZE: | |
| 26. Enter '1' to use expanded field size for compartment quantities.
Default is ' ' and will use a 5 digit, no decimal condensed size. |
|
| AUTOMATIC PROCESSING (SUBSYSTEM): | |
| 27. Enter '1' to print packaged picking ticket (P49430). Enter
'2' to print trip-based packaged loading note (P49440). Enter '3' to print both. |
| Processing Option | Processing Options Requiring Further Description |
|---|---|
| 1. Enter a DREAM Writer Version for Trip Sequence Maintenance.
(ZJDE0001 is the default.) |
(P49370) is the program number that can be added to the processing option. |
| Processing Option | Processing Options Requiring Further Description |
|---|---|
| DEFAULT VALUES: | |
| 1. Enter default volume UOM. | |
| PROCESSING VALUES: | |
| 2. Enter the range of allowed trip statuses for processing. When changing a trip's vehicle, the highest 'Thru' status allowed is 55. | |
| From Status
Thru Status |
|
| 3. Enter '1' to automatically assign staff for trips assigned to a new vehicle and/or shift.
'0' is the default and will not change the staff. |
|
| GANTRY/ LOADING RACK DEFAULTS: | |
| 4. If you are using an automated gantry, enter '1' to automatically re-send changed trips.
Blank is the default and will not automatically re-send trips. |
|
| 5. Enter a DREAM Writer version for the Download Data Queue Interface (P49570).
(ZJDE0001 is the default.) |
|
| 6. Enter the download trip status to be recognized when a change in sequence is sent to the gantry or loading rack. |
| Processing Option | Processing Options Requiring Further Description |
|---|---|
| DEFAULT VALUES: | |
| 1. Mode of Transport | |
| 2. Volume Unit of Measure | |
| 3. Weight Unit of Measure | |
| PROCESS CONTROL: | |
| 4. Enter the desired initial search mode: 'T' for Trip mode, 'O' for Order mode. | |
| 5. Enter the Version of S.O. Entry (P4211) to execute.
(ZJDE0001 is the default) |
|
| 6. Enter the Version of Trip Creation/ Maintenance (P49350) to execute.
(ZJDE0001 is the default) |
|
| 7. Enter default values for:
From: Trip Status Thru: Trip Status From: Order Status Code Thru: Order Status Code Note: Blanks are the default for all of the above. |
|
| 8. If you are using an automated gantry, enter '1' to allow download of approved trips.
If blank (default) the system does not download trips. |
|
| 9. Enter a DREAM Writer version for the Download Data Queue Interface (P49570).
(ZJDED0001 is the default) |