This chapter contains these topics:
During the import and export of data, the system displays informational messages at the bottom of the screen regarding the process. Following are the messages and the explanation for each message.
Message | Explanation |
---|---|
JDE0502 Import Process Completed Normally | All requested records from the CSV file have been successfully imported. |
JDE0503 **ERROR** Import Process Failed | The requested import failed as a result of opening or reading the CSV file. |
JDE0504 **WARNING** Maximum subfile lines (9998) exceeded | The import process can process only 9998 lines in one attempt and that was exceeded. Change the Start Data Row Number parameter to resume importing after the last record imported. |
JDE0507 Import process aborted but parameters were changed | User pressed F3 in the Import parameter window, aborting the import process but the import parameters were changed. |
JDE0508 **ERROR** Import parameters not found | Import parameters were not found for Program/Version/User. Setup the parameters and rerun the import process. |
JDE0509 **ERROR** Import Parameter Error | Either the Field ID Row Number is incorrect because invalid field names were found in the row or the Start Data Row Number is greater than the last row in the CSV file. |
JDE0510 ** ERROR ** Separator Character Inconsistent | The separator character in the CSV file is not the same as the one in Import/Export user preferences. Change one of them to be consistent with the other. |
JDE0511 Import process aborted and parameters are unchanged | F3 was pressed in the Import parameter window, aborting the import process. The import parameters are unchanged. |
JDE0514 Template file created successfully | The template CSV file was created successfully in the location specified. |
JDE0515 ** ERROR ** Template creation failed | For an interactive import template build, the File Name parameter is not a display file or for a batch import template build, the Batch Import File parameter is not a database file. |
JDE0517 Group of records imported | A group of records have been imported. Import stopped at the end of the group because header information has changed. Continue to import without exiting the application to import the next group of records. |
JDE0519 **ERROR** Attempt to insert invalid data | The batch import process attempted to insert invalid data into a numeric field. The process aborted. |
JDE0520 *ERROR** Unsupported display format | An error was encountered during the import process. The system does not currently support importing of data into this display format. |
Message | Explanation |
---|---|
JDE0500 Export Process Completed Normally. Exit video to close export file | The requested export completed successfully. The file on the IFS remains open until you exit this video. |
JDE0501 **Error** Export Process Failed | The requested export failed as a result of opening or writing to the export file. This is most commonly caused by having the file opened in Excel. The file should not be in use by another application when exporting data to it. Improper authority to the IFS directory path could also cause this error condition. |
JDE0505 Export aborted but parameters were changed | Changes made to export parameter values in the parameter window were applied but the user pressed F3 to abort running the actual export process. |
JDE0506 Export parameters not found | The user did not enter and save parameter values in the export parameter window before running the export. |
JDE0512 Export process aborted and parameters are unchanged | F3 was pressed in the Export parameter window, aborting the export process. The export parameters are unchanged. To rerun the process, invoke the parameter window again and press F6 to continue with Export |
JDE0513 Inquiry required before Export | An interactive application must have issued and inquiry and populated the subfile with data before the export process is initiated |
JDE0518 Warning** Export | An interactive application attempted to export more than 9999 subfile records in a single export request. Only 9999 records are written to the export file. This is not a restriction of the export file. The export file can exceed this number by issuing multiple export requests in the application. |
JDE0521 Batch Export Process Completed Normally | All data successfully exported to the IFS. |
JDE0522 **ERROR** Export Process Failed | An error was encountered during the export process. |
JDE0523 Export File Has Been Successfully Sent | The export file in the Export parameter window was closed and sent to distribution as a file attachment. The file remains closed until you export data to it again. |
JDE0524 Export File Was Sent, But With Errors | The export file in the Export parameter window was closed but was not sent to distribution as a file attachment. The file remains closed until you export data to it again. |
JDE0526 FASTR/STAR Burst Failed | The required parameters with bursting were not specified for either FASTR or STAR. For non-row FASTR or STAR, AN8 must be Sequence # 1 and Page Break and Total must be set to Y. Also Print Descr w/ Keys must not be N. For FASTR with rows, AN8 must be Sequence # 2 and Page Break and Total must be set to Y. Also Print Descr w/ Keys must not be N. |
Message | Explanation |
---|---|
590M | Import / Export parameter record does not exist. |
590N | Copy Spooled File command has failed. |
590O | Printer File does not exist. |
590P | Create Physical File command failed. |
590Q | Delete File command failed. |
590R | Copy Spooled File to PDF command failed. |
590S | Write to export file failed. |
590T | Levels of XML Grouping Tags exceeds 9. |
590U | Invalid XML grouping code encountered. |
590V | Burst field is not defined in World Writer specs. |
590W | World Writer level break incorrectly defined. |
590X | World Writer level break field incorrectly defined. |
590Y | World Writer Field specifications are not defined. |
590Z | Column specifications are not defined. |
591A | FASTR/STAR Invalid Burst Parameters. |
591B | SQL Prepare statement failed. |
591C | SQL Describe statement failed. |
591D | No data was selected. |
591E | CSV Batch Import invalid data. |
591F | Read for Batch Import file failed. |
591G | CSV Batch Import parameter error. |
591H | CSV Batch Import separator character. |
591I | Batch Import SQL insert failed. |
591J | XML Batch Import Invalid Document Name. |
591K | File Not Eligible for Batch Import. |
591L | XML Batch Import File Name Error. |
591M | XML Batch Import Field Name Error. |
591N | Transformation of XML was unsuccessful. |
591O | Transformed XML file does not validate. |
JDE9999 | JDE - Global Error Message |