管理网络路由。
|
|
各个路由的 href 路径都使用在 CLI 中设置的路由 ID 集,但当修改路由时,这些值也会发生变化。API 支持使用路由中的唯一属性选择单个路由。相较于 routes/route-###,语法为 routes/<name>=<value>
列出在设备上创建的所有网络路由。
请求示例:
GET /api/network/v1/routes HTTP/1.1 Authorization: Basic abcd1234MWE= Host: zfssa.example.com:215 Accept: application/json
结果示例:
HTTP/1.1 200 OK
Content-Type: application/json
Content-Length: 192
{
"routes": [{
"destination": "0.0.0.0",
"family": "IPv4",
"gateway": "10.80.231.1",
"href": "/api/network/v1/routing/route-000",
"interface": "ixgbe0",
"mask": 0,
"route": "route-000",
"type": "static"
}, {
"destination": "10.80.231.0",
"family": "IPv4",
"gateway": "10.80.231.58",
"href": "/api/network/v1/routes/route-001",
"interface": "ixgbe0",
"mask": 24,
"route": "route-001",
"type": "system"
}]
}
获取单个路由的属性。
请求示例:
GET /api/network/v1/routes/destination=10.80.231.0 HTTP/1.1 Authorization: Basic abcd1234MWE= Host: zfssa.example.com:215 Accept: application/json
结果示例:
HTTP/1.1 200 OK
Content-Type: application/json
Content-Length: 192
{
"route": {
"destination": "10.80.231.0",
"family": "IPv4",
"gateway": "10.80.231.58",
"href": "/api/network/v1/routes/route-001",
"interface": "ixgbe0",
"mask": 24,
"route": "route-001",
"type": "system"
}
}
创建新的网络路由。如果向系统添加其他路由,则路由 href 值会发生更改。创建路由时将不会返回路由信息,因为返回的属性将与输入属性相同。成功创建路由后会返回 HTTP 状态 204 (Created)。
创建静态路由的请求示例:
POST /api/network/v1/routes HTTP/1.1
Authorization: Basic abcd1234MWE=
Host: zfssa.example.com:215
Content-Type: application/json
Content-Length: 164
{
"family": "IPv4",
"destination": "0.0.0.0",
"mask": "0",
"gateway": "10.11.12.1",
"interface": "ixgbe0"
}
结果示例:
HTTP/1.1 201 Created
删除现有网络路由。
请求示例:
DELETE /api/network/v1/routes/route-001 HTTP/1.1 Authorization: Basic abcd1234MWE= Host: zfssa.example.com:215
结果示例:
HTTP/1.1 204 No Content