Esta imagen de firmware final demora aproximadamente seis minutos.
-> load -source http://<ip_address_or_hostname>/Sun_System_Firmware-9_5_2_g-SPARC_T7-4.pkg /SP/firmware
NOTE: An upgrade takes several minutes to complete. ILOM
will enter a special mode to load new firmware. No
other tasks can be performed in ILOM until the
firmware upgrade is complete and ILOM is reset.
Are you sure you want to load the specified file (y/n)? y
Preserve existing configuration (y/n)? y
.............................................................................................................................................................................................................................................................................................
Firmware update is complete.
ILOM will now be restarted with the new firmware.
-> /sbin/reboot
Stopping coredump capture...done.
Watchdogd: Stopping patting ... Done
Network Interface Plugging Daemon...stop eth0...done.
Stopping kernel log daemon....
...
Mounting root filesystem read-only...done.
Restarting system.
Will now restart+****
Primary Bootstrap.
SYSRST = 0x1
Reading RO_Hw_Straps
Searching for packages
Good uboot CRC for data=[*000c0000, len=553b4] in pkg *0013f800 (crc: 0x44f46b65)
Good uboot CRC for data=[*000c0000, len=80000] in pkg *00140000 (crc: 0xb0b8c9ac)
Good kernel CRC for data=[*00142000, len=1e0de8] in pkg *00140000 (crc: 0xbf324077)
Good root CRC for data=[*00340000, len=ef1000] in pkg *00140000 (crc: 0x5d3b8e31)
Good vbscdir CRC for data=[*01740000, len=4c000] in pkg *00140000 (crc: 0x7a62c323)
Good uboot CRC for data=[*018c0000, len=553b4] in pkg *0193f800 (crc: 0x44f46b65)
Good uboot CRC for data=[*018c0000, len=80000] in pkg *01940000 (crc: 0xb0b8c9ac)
Good kernel CRC for data=[*01942000, len=1e0de8] in pkg *01940000 (crc: 0xbf324077)
Good root CRC for data=[*01b40000, len=ef1000] in pkg *01940000 (crc: 0x5d3b8e31)
Good vbscdir CRC for data=[*02f40000, len=4c000] in pkg *01940000 (crc: 0x7a62c323)
Starting U-Boot at 0x000c0000\ufffd
U-Boot 2010.03
Custom Pilot3 U-Boot 0.1 (Dec 4 2015 - 11:41:49) r105871
VGA buffer reserved 0x800000 bytes at 0x80000000
sptrace allocated 0x800000 bytes at 0x9F800000
DRAM: 496 MB
Flash: 48 MB
In: serial
Out: serial
Err: serial
ARM restart caused by: reboot
hardware interface reset by: none
Galactic1: 0x4000c900, Galactic2: 0x0
The host is OFF(S5) (hostWantsPwr=0, powerGood=0,
allowPwrOn=0|0, outOfReset=0, fatalError=0).
pilot3 chip revision : 0x5
SP Debug Jumper: Inserted
SP CLR_PASSD Jumper: Empty
...
Loading kernel module video.
Loading kernel module Timer.
Mounted vbsc
params: (20.2 MB) exists mounted
persist: (106.3 MB) exists mounted
coredump: (70.4 MB) exists mounted
large: (64.5 MB) exists mounted
extra: (36.4 MB) exists mounted
package: (230.3 MB) exists mounted
miniroot: (468.1 MB) exists mounted
Available freespace: 0 MB
Checking configuration files state ...
Image date: Fri Dec 4 12:18:44 PST 2015 Image revision: 105871
Conf date: Fri Dec 4 12:18:44 PST 2015 Conf revision: 105871
Configuration files state good after upgrade.
Setting the system clock.
System Clock set to: Mon Dec 7 19:31:08 UTC 2015.
...
Probing frus ...done
Done running plat
Identifying Product Data...Done
Setting poweron delay...
Starting Dynamic FRUID Daemon early init: dynafrud_early_init Done (0)
INIT: Entering runlevel: 3
Preparsing sensor.xml... ( took 1 seconds ) done
Starting Event Manager: eventmgr . Done
Starting ipmi log manager daemon: logmgr . Done
...
waiting for GM ready ...GM is ready
Starting Sppostadm: -a Done
ORACLESP-XXXXXXXX login:
El proceso de actualización de firmware está completo.
-> start /System
Are you sure you want to start /System (y/n)? y
Starting /System
->