-> load -source http://<ip_address_or_hostname>/Sun_System_Firmware-9_5_2_g-SPARC_T7-4.pkg /SP/firmware NOTE: An upgrade takes several minutes to complete. ILOM will enter a special mode to load new firmware. No other tasks can be performed in ILOM until the firmware upgrade is complete and ILOM is reset. Are you sure you want to load the specified file (y/n)? y Preserve existing configuration (y/n)? y .............................................................................................................................................................................................................................................................................................. Firmware update is complete. ILOM will now be restarted with the new firmware.
새 시스템 펌웨어의 초기 이미지 로드 후 SP가 기본 플래시에서 자동으로 재부트됩니다. Preserve existing configuration (y/n)? 질문에 대해 y를 응답했더라도 재부트 중 SP는 출하 시 기본값을 사용합니다.
-> /sbin/reboot Stopping coredump capture...done. Watchdogd: Stopping patting ... Done Network Interface Plugging Daemon...stop eth0...done. Stopping kernel log daemon.... ... Mounting root filesystem read-only...done. Will now restart. Restarting system. +**** Primary Bootstrap. SYSRST = 0x1 Reading RO_Hw_Straps Searching for packages Good uboot CRC for data=[*000c0000, len=553b4] in pkg *0013f800 (crc: 0x44f46b65) Good uboot CRC for data=[*000c0000, len=80000] in pkg *00140000 (crc: 0xb0b8c9ac) Good kernel CRC for data=[*00142000, len=1e0de8] in pkg *00140000 (crc: 0xbf324077) Good root CRC for data=[*00340000, len=ef1000] in pkg *00140000 (crc: 0x5d3b8e31) Good vbscdir CRC for data=[*01740000, len=4c000] in pkg *00140000 (crc: 0x7a62c323) Good uboot CRC for data=[*018c0000, len=553b4] in pkg *0193f800 (crc: 0x2f78db1d) Good uboot CRC for data=[*018c0000, len=80000] in pkg *01940000 (crc: 0x97d92980) Good kernel CRC for data=[*01942000, len=1df2e0] in pkg *01940000 (crc: 0xf7697623) Good root CRC for data=[*01b40000, len=ef1000] in pkg *01940000 (crc: 0xb19fd0e5) Good vbscdir CRC for data=[*02f40000, len=4c000] in pkg *01940000 (crc: 0xda3cef04) Starting U-Boot at 0x000c0000\ufffd U-Boot 2010.03 Custom Pilot3 U-Boot 0.1 (Dec 4 2015 - 11:41:49) r105871 VGA buffer reserved 0x800000 bytes at 0x80000000 sptrace allocated 0x800000 bytes at 0x9F800000 DRAM: 496 MB Flash: 48 MB In: serial Out: serial Err: serial ARM restart caused by: reboot hardware interface reset by: none Galactic1: 0x4000c900, Galactic2: 0x0 The host is OFF(S5) (hostWantsPwr=0, powerGood=0, allowPwrOn=0|0, outOfReset=0, fatalError=0). ...
프로세스가 계속됩니다. 이 예에서 기울임꼴로 표시된 섹션은 일반적인 펌웨어 업그레이드와 다른 출력을 나타냅니다. 이 경우 9.5.2.g 이전 버전에서 펌웨어 버전 9.5.2.g 이상으로 펌웨어 업그레이드 동안에는 이 출력이 정상입니다.
Loading kernel module video. Loading kernel module Timer. Mounted vbsc Erasing the nand ... Erasing 512 Kibyte @ 40000000 -- 100 % complete. no UBI volumes found, initializing media: erasing media.. formatting media.. UBI device number 0, total 2048 LEBs (1056964608 bytes, 1008.0 MiB), available 2024 LEBs (1044578304 bytes, 996.2 MiB), LEB size 516096 bytes (504.0 KiB) UBI volumes (0): params: (20.2 MB) created mounted persist: (106.3 MB) created mounted coredump: (70.4 MB) created mounted large: (64.5 MB) created mounted extra: (36.4 MB) created mounted package: (230.3 MB) created mounted miniroot: (468.1 MB) created mounted Available freespace: 0 MB Checking configuration files state ... ... not preserving config ... Restoring configuration files ... params: (20.2 MB) exists was_mounted persist: (106.3 MB) exists was_mounted coredump: (70.4 MB) exists was_mounted large: (64.5 MB) exists was_mounted extra: (36.4 MB) exists was_mounted package: (230.3 MB) exists was_mounted miniroot: (468.1 MB) exists was_mounted Available freespace: 0 MB Saving TLI data...FAILED Removing old configuration files Removing platform specific files Restoring default configuration files...Done Restoring TLI data...FAILED Configuration files state good 1970-01-01 00:02:42 ** Error: Did not find any saved ilom package file sp_trace_write failed: -1 Setting the system clock. System Clock set to: Mon Dec 7 18:51:52 UTC 2015. Initializing SP Trace Buffers Setting up networking.... Will now mount local filesystems:. Will now activate swapfile swap:done. Cleaning up temporary files...Cleaning /var/run...done. Cleaning /var/lock...done. ... Starting ILOM Watchdog daemon. Done Running plat...Preparsing sensor.xml... ( took 12 seconds ) done Probing frus ...done Done running plat psnc_file_read: cannot access file '/persist/psnc_backup1.xml' Identifying Product Data...Backup2 Setting poweron delay... Starting Dynamic FRUID Daemon early init: dynafrud_early_init Done (0) INIT: Entering runlevel: 3 Preparsing sensor.xml... ( took 1 seconds ) done Starting Event Manager: eventmgr . Done ... waiting for GM ready ....GM is ready Starting Sppostadm: -a Done ORACLESP-<XXXXXXXX> login:
SP 네트워크 등록 정보 복원을 참조하십시오.