Scheduler Configuration
Detailed
descriptions can be found in the related program descriptions; a graphical
overview can be found in the chapter Graphical
Overview: Scheduler Configuration.
- Enter a name in the field Scheduler Name. This name can be
chosen at will but it has to be the same as the "Program Name"
in the windows "Process Unit" and "Applications". Make
sure the spelling is correct.
Note:
If the entry can actually be chosen at will finally depends on
the successive order in which you configure the scheduler. If you begin
with the entries in the window "Applications", you have to adopt
the "Program Name" entered there in the window "Scheduler
Position".
- Enter a sequential number in the field Position.
- Enter the program to be involved in the scheduler
in the field Program Name.
- In the field Mode,
you define on which day (of the week) the program is to be started.
Note:
If you select "No Day", you can configure your scheduler(s)
without them being started immediately.
- Define the start time in the field Time.
- In the field Day
of the Month, you can define the start day within a month. You
should only make an entry here if you selected the Mode Day in Month.
- Save your entries and close the window.
You
have to install a process unit for the scheduler by making the following
entries:
- Select the appropriate Installation.
- Enter a free number in the field Process Unit (e.g. 77).
- The name for the Process Unit can be chosen at will. Enter an appropriate
name.
- In the field Login
Name, no entry is necessary.
- Select the Program
Type Oscar
Client.
- Select the appropriate System Unit.
- Select the required Language.
- The entry in the field Program Name must be the same as in the window
"Scheduler Position" (field "Scheduler Name") and in
the window Applications
(field "Program Name").
- Activate the option Graphic.
- Save your entries and close the window.
- Note:
If you would like to print, you have to
assign a Device of the type line printer to this
process unit.
Applications (System -> User Interface)
- Go to System ->
User Interface -> Applications.
- Select the Appl.
Name Scheduler.
- Enter a free number in the field Application, e.g. 777.
- The entry in the field Program Name can generally be chosen at will but it must
be absolutely the same as in the windows "Scheduler Position"
(field: Scheduler Name) and "Process Unit" (field: Program
Name). If you have already made entries there, you have to adopt the name.
- Save your entries and close the window.
Stopping /Starting the Application
- The entries will only apply after the MICROS Retail OSCAR POS
application has been stopped and started again.
MICROS Retail Deutschland GmbH
Salzufer 8
D-10587 Berlin
Germany