Xavax Cash Card Terminal
The Xafax Cash Card terminal can be used for the following functions depending on the configuration.
If the Xafax Cash Card terminal is used, this device must be programmed under Main -> Configuration -> Devices in group EFT and the appropriate card reader parameters must be set in Branch -> Card parameter.
"CARDREADER" must be entered in field Event name for the Xafax Cash Card terminal. The entry for the track must match the entry in the card reader parameters. The entry in field "Eft-Type" is not relevant at present.
The cash card specifications can be found in the table below:
|
Byte |
Field description |
|
0-6 |
DvXafax |
|
7-14 |
Kartennummer |
|
15-16 |
"Personal Value"-Typ (muss 1 sein für Geldbörsenfunktion) |
|
17-18 |
"Other Value"-Typ (muss 2 sein für Geldbörsenfunktion) |
|
19-25 |
"Personal Value"-Wert in kleinsten Einheiten (Cent) |
|
26-32 |
Limit für "Personal Value" in kleinsten Einheiten (Cent) |
|
33-39 |
"Other Value"-Wert in kleinsten Einheite (hängt vom Typ ab, außer 3: Cent, für Typ 3: 1/1000stel Prozent [für Diskont]) |
|
40-55 |
Benutzername |
|
56-71 |
Benutzer-ID |
|
72-75 |
Benutzergruppe |
|
76-81 |
Transaktionsnummer |
|
82-84 |
Gerätenummer |
Card reader parameter
If the cash card is to be used for several functions (payment, customer identification, card initialization, etc.), a data record with the appropriate card parameters must be stored in program Branch -> Card reader parameter. The event "CASHCARD" should be entered in field "Simulated key". The magnetic track is read by the Xafax Cash Card terminal device as from position 0 up to a length of 157 bytes. Both fields are used accordingly for the field length.
- CASHCARD
Track: = 9
Seq.no.: = 1
Description: = Xafax
Compare with: DvXafax
Simulated key: CASHCARD
Offset field 1: = 0
Length field 1: = 0
Offset field 2: = 0
Length field 2: = 85
Amount top-up
Loading the cash card with a specific amount is done with key event <fPAYINCARD>. Enter the amount and the no. of the finance type which has been programmed for topping up cash cards. The cash card is then swiped. If a write error is made, the transaction will be discontinued.
A finance type Paid in must be stored in the system for topping up cash cards. The parameter Receipt predepression must be set for this finance type.
Payment with a payment type
A payment type of category "Cash card" must be set in the system to deal with the settlement of payments with a cash card. The correct ISO exchange rate must also be programmed.
Reading card information
The data of the cash card can be called up at the terminal with key event <READCASHCARD>. The card data is printed out on the receipt with key <ST>.
Click
on the graphic to return to Content.
Salzufer 8
D-10587 Berlin