The program description deals with the following:
The data for connection of a payment terminal type DK PointV2.3.0.0 can be updated, i.e. created, changed or deleted, with this program. Data which has already been stored can also be displayed.
The interface and link to a processing unit must also be defined and the device-specific operating mode of the EFT terminal set.
Payment terminal devices are used for payments with magnetic cards. Further parametering, e.g. the appropriate Payment type with link to the appropriate Credit card , etc. are necessary to operate this device.
Notes:
This device driver can be used in combination with several versions of Point's Flexdriver.
The corresponding Dll must be selected in field "DLL-Version". In addition, the Flexdriver dll must be provided by the terminal vendor.
All options available for update of the basic data have been described below.
As with nearly all programs the following also applies here:
Field with firmly defined selection options
Select one of the debug levels offered by clicking on this field and confirming the required level with a second click.
The system offers the following debug levels:
Note:
Only select a value higher than "0" if a
protocol of the communication of the payment terminal is required for error
analysis. Information is provided in file "errlog" in directory work
of the appropriate system unit.
Field with firmly defined selection options
Select one of the values for the confirmation line offered by clicking on this field and confirming the required value with a second click.
The system offers the following values for the confirmation line:
Field with firmly defined selection options
Select one of the Dll versions offered by clicking on this field and confirming the required Dll version with a second click.
The system offers the following Dll versions levels:
Select one of the transaction types offered by clicking on this field and confirming the selected option with a second click.
The system offers the following:
Select one of the options for print control by clicking on this field and confirming the selected option with a second click.
The system offers the following:
Entry range permitted: numeric 0 - 9
Default = 1
Enter a number to identify the terminal. The entry herre must match the entry in the appropriate payment type, i.e. the payment terminal whose no. is entered in program Payment type will be selected.
Entry range permitted: numeric 0 - 230400
The port no. or the baud rate should be entered here in accordance with the linked device interface.
Entry range permitted: numeric 0 - 999
Enter the local currency identification no..
Entry range permitted: numeric 0 -9
Enter a value to define the number of decimal places.